• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1125-1132
• /
• 2005

Ultra-wideband (UWB) ranging poses a set of time delay estimation problems for designers. The possibility of a large error can be a challenging problem for accurate ranging and positioning. An approximate analysis of large error performance of UWB ranging in multipath and multiuser environments is posed. Both analytical and experimental approaches are taken to evaluate the large error variance in a correlation-based serial search scenario.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.961-964
• /
• 2011

The cognitive ultra-wideband (UWB) network detects interfering narrowband systems and adapts its configuration accordingly. An inherently adaptive and flexible candidate for cognitive UWB transmission is the wavelet packet multicarrier modulation (WPMCM). In this letter, we use an enhanced forward consecutive mean excision thresholding algorithm to tackle the noise uncertainty in the wavelet-based sensing of WPMCM systems, and mathematical analysis is performed for primary user channel fading. As a benchmark, we compare the proposed system with a conventional fast Fourier transformation-based system, and performance investigation proves significant improvements when primary and secondary links are subjected to multipath fading and noise.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.648-653
• /
• 2011

We propose a new frequency offset estimation technique for multiband orthogonal frequency modulation (MB-OFDM) based ultra wideband (UWB) systems. The proposed frequency offset estimation technique is related to the scheme of Schmidl for channel model 1 (4-1Om NLOS, rms. delay =14.3ns.) using more than two symbols and with alternate symbols. Variance of frequency offset estimate obtained from the proposed frequency offset estimation technique approaches very nearing to Cramer Rao Lower Bound (CRLB) in an AWGN channel. BER performance of the proposed technique is also presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.60-66
• /
• 2008

In this paper, the CPW-fed Ultra-wideband antenna is designed and fabricated for UWB communications. To achieve ultra-wide bandwidth of the antenna, we propose the mutual coupling of two planar monopole antennas. The mutual coupling of monopole pair of the proposed antenna is optimized by adjusting the parameters, the widths of the planar monopoles and the space between two monopoles. Two UWB antennas with different horizontal sections of the CPW-fed monopole antenna are fabricated and measured to examine the mutual coupling effects on the monopole pair antenna. The measured result show that two antennas are satisfied with UWB communication band(3.1$\sim$10.6Ghz).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.941-948
• /
• 2005

In this paper, we have proposed a Ultra-Wideband slot notch antenna by using a semi-circular extension. The proposed antenna cover the entire UWB band(3.1${\~}$10.6 GHz) and notch out the IEEE 802.1la frequency band(5.15${\~}$5.825 GHz) by inserting a $\lambda$/4 length slot into the patch. A prototype antenna was fabricated on FR-4( ${\epsilon}_r$ =4.4, substrate thickness=0.8 mm) and measured for VSWR characteristics. The measured notched frequency variations versus frequency for different slot length. The path loss and group delay were measured. The proposed antenna also show a good gain flatness(1.9 dBi) except the IEEE 802.1la frequency band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.199-203
• /
• 2005

In this paper, a novel compact and frequency band-notch antenna for Ultra-Wideband(UWB) applications is proposed. The designed antenna not only shows good impedance bandwidth for ultra-wideband but has band notch characteristic for the frequency band of $5.15\~5.825\;GHz$ limited by IEEE 802.1la and HIPERLAN/2. To achieve both properties of wide band and band notch, the techniques of a concaved ground plane and inserted U-shaped thin slot into planar radiator are used respectively. A manufactured antenna satisfied VSWR<2 for the frequency band of $2.95\~11.7\GHz$ except the limited band of $4.92\~5.866\;GHz$.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.65-70
• /
• 2016

This paper proposes and experimentally tests a modified circular slot antenna fed by a fork-like tuning stub for ultra-wideband (UWB) operation. The proposed antenna consists of a modified circular slot model and fork-like tuning stub. The proposed antenna is printed on a 34.0 mm × 30.0 mm FR4 substrate with thickness of 1.0 mm and relative permittivity of 4.4. The effect of various parameters of the circular slot and fork-like tuning stub is investigated for UWB operation. The modified circular slot and fork-like tuning stub are fabricated on the substrate to achieve wideband operation and good impedance matching. Experimental results demonstrated that the measured return loss exhibits an acceptable agreement with the simulated return loss and satisfies the -10 dB impedance bandwidth requirement while simultaneously covering the UWB bands. In addition, the proposed antenna shows good radiation characteristics and gains in the UWB bands.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.53-59
• /
• 2007

Wimedia UWB(Ultra-Wideband) platform provides data rates up to 480Mbps in WPAN (Wireless Personal Area Network). Wimedia conformant devices access to the channels through superframe concept for communications. As the channel resource is limited, the optimal channel time required for each device needs to be estimated to share the resource efficiently among the devices. In this paper, we propose a scheme to estimate the required channel time in a super frame to satisfy the QoS of the application on a device. The channel time is estimated from the service rate which is computed from the TSPEC of the application. In the process of the estimation, we take the frame overhead for data transmission as well as the overhead due to the acknowledgement scheme, preamble, and MDSU size into consideration. We also analyze and compare the throughputs for different acknowledgement scheme, preamble, and MDSU size situations. The estimated channel time required for a given service rate is allocated in the unit of MAS(Medium Access Slot).

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.51-58
• /
• 2006

In this paper, we evaluated Ultra Wideband MC-CDMA system which is the combination of DS-CDMA and OFDM systems, which have been drafting in current standardization for IEEE802.15.3a. Too many Rake Fingers are demanded in the DS-CDMA system to detect multi-path signals, which results in high system complexity. OFDM system fails to qualify for FCC certification unless frequency hopping is off. MC-CDMA has lower complexity compared to DS-CDMA and shows good performance against frequency selective fading. In addition, for a wide-band communication, less radio power per spectrum is allowed in the MC-CDMA system than in an OFDM system. The MC-CDMA system is analyzed by a numerical formula and compared with DS-CDMA and OFDM by a computer simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.369-373
• /
• 2010

Modem electronic circuits are of importance for the function of communication, traffic systems and security systems. An intentional threat to these systems could be of big casualties and economic disasters. This paper has shown damage effect of microcontroller device with coupling caused by UWB-HPEM(Ultra Wideband-High Power Electromagnetics). The UWB measurements were done at an Anechoic Chamber using a RADAN UWB voltage source, which can generate a transient impulse of about 180 kV. The susceptibility level for microcontroller has been assessed by effect of various operation line lengths. The results of susceptibility analysis has showed that the effect of the reset line length on the MT(Ma1function Threshold) is larger than the effect of the different line length(Data, Power, Clock). With the knowledge of these parameters electronic system can be designed exactly suitable concerning the system requirements. Based on the results, susceptibility of microcontroller can be applied to protection plan to elucidate the effects of microwaves on electronic equipment.