• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.806-811
• /
• 2017

An all-transparent ultraviolet (UV) photodetector was fabricated by structuring $p-NiO/n-SnO_2/ITO$ on a glass substrate. $SnO_2$ is an important semiconductor material because of its large bandgap, high electron mobility, high transmittance (as high as 80% in the visible range), and high stability under UV light. For these reasons, $SnO_2$ is suitable for a range of applications that involve UV light. In order to form a highly transparent p-n junction for UV detection, $SnO_2$ was deposited onto a device containing NiO as a high-transparent metal conductive oxide for UV detection. We demonstrated that all-transparent UV photodetectors based on $SnO_2$ could provide a definitive photocurrent density of $4nA\;cm^{-2}$ at 0 V under UV light (365 nm) and a low saturation current density of $2.02nA{\times}cm^{-2}$. The device under UV light displayed fast photoresponse with times of 31.69 ms (rise-time) and 35.12 ms (fall-time) and a remarkable photoresponse ratio of 69.37. We analyzed the optical and electrical properties of the $NiO/SnO_2$ device. We demonstrated that the excellent properties of $SnO_2$ are valuable in transparent photoelectric device applications, which can suggest various routes for improving the performance of such devices.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.228-233
• /
• 2008

Ultraviolet sterilizers (UVS) are widely used in restaurants, cafeterias and catering businesses in Korea. The proper application of UVS, however, is still questionable since no studies have clearly identified their efficacy and safety, while regulations and regulatory management systems are yet to be established. In the present study, the efficacy of UVS were investigated by measuring spatial UV intensity inside five commercially operated UVS. The operating safety parameters were also checked by measuring leaked UV intensity. The UV intensities were inversely proportional to distance from the UV lamp within 25 cm, and to the square of the distance exceeding 25 cm. The UV intensities in commercial UVS varied with the distance from UV lamp and the incident angle, highlighting efficacy and stability concerns. Notable leakage was detected through the door gaps of a studied UVS, which also brought about safety concerns. Allowable working distances for the UV leaking UVS were suggested based on international standards.

• YAKHAK HOEJI
• /
• v.34 no.6
• /
• pp.415-421
• /
• 1990

The effects of temperature, pH, light and concentration on the degradation of trimebutine maleate in aqueous solution were investigated on the basis of accelerated stability analysis, and the stabilization of the solution was attempted by addition of several additives. The decomposition of trimebutine maleate in solution followed first-order reaction the was not only accelerated by temperature elevation but also the lower the concentratin the more speeded up the reaction. The decomposition mechanism of trimebtine could be confirmed by hydrolysis of ester bond in the structure. It was assumed trimebutine maleate is so photosensitive that the solution of the drug underwent accelerated decomposition under UV rays. What is more, the degradation of trimebutine solution was supposed to catalyzed by specific acid-base catalysis considered the pH dependence for the hydrolysis of ester, and the solution was most stable over the range of pH 2-2.8 in solution. The additives, citric acid, asparitc acid and glutamic acid, inhibited considerably the decomposition of the drug solution, and these additives might be used as stabilizers in trimebutine maleate solution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.35-39
• /
• 2016

In this research, we focused on the improvement of cy3 dye's characteristics for LCD color filter. Solubility and thermal stability are main characteristics of dyes for LCD color filter. We performed experiment to change counter cation of cy3 dyes with alkoxy substituent for these purposes. These cy3 dyes (1b~5b) were prepared through the synthetic procedure of three steps. The synthesized new cy3 dyes were charaterized by using NMR, FT-IR, UV/Vis spectroscopy, and TGA. These cy3 dyes showed purple color and maximum absorption wavelength (${\lambda}_{max}$) in the range of 578~590 nm in UV/Vis spectrum. We confirmed that solubility and thermal stability of cy3 dyes were dependent on the structure of counter cation. Cy3 dyes with alkoxy substituent have good solubility in organic solvents such as dichloromethane, methanol, and acetone. Especially, Cy3 dye with 4-nitrobenzyl counter cation (5b) gave excellent solubility characteristics.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.566-569
• /
• 2005

The extracellular polysaccharide...(EPS) has been used in a wide variety of industrial applications because of gel formation, emulsion stability, control of the surface tension, water absorption and film formation etc. In this study, inhibitory activity on tyrosinase and inhibitory activity on angiotensin converting enzyme...(ACE) are determined. UV adsorption wavelength, beads formation of EPS were investigated. In the result, in 1%(w/v) EPS concentration, EPS had inhibitory activity of 71.8% on tyrosinase and inhibitory activity of 61.5% on angiotensin converting enzyme in 1.5% EPS concentration. Adsorption wavelength of EPS was UV-B,C . Beads based on EPS were prepared by w/o emulsion method and the shape of EPS beads observed by SEM was spherical and uniform.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.500-503
• /
• 2003

We studied the nematic liquid crystal (NLC) aligning capabilities by the UV alignment method on a a-C:H thin film surface. A good LC alignment by UV exposure on the a-C.H thin film surface at 200 ${\AA}$ of layer thickness was achieved. Also, a good LC alignment by the UV alignment method on the a-C:H thin film surface was observed at annealing temperature of 180 $^{\circ}C$. However, the alignment defect of the NLC was observed above annealing temperature of 200 $^{\circ}C$. Consequently, the good thermal stability of LC alignment by the UV alignment method on the a-C:H thin film surface can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.93-98
• /
• 2020

We investigated the effect of a post-annealing process using ultraviolet (UV) light on the electrical properties of solution-processed InZnO (IZO) thin-film transistors (TFTs). UV light was irradiated on IZO TFTs for different time periods of 0s, 30s, and 90s. We measured transfer and retention stability curves to evaluate the performance of the fabricated TFTs. In addition, we measured height, amplitude, and phase AFM images to analyze changes in the surface and morphology of the devices. AFM measurements were performed by setting the drive amplitude of the cantilever tip to 47.9 mV in tapping mode, then dividing the device surface into 500 nm × 500 nm. In the case of IZO TFT irradiated with UV for 30s, the electron mobility and I_on/I_off ratio were improved, the threshold voltage was reduced by approximately 2 V, and the subthreshold swing also decreased form 1.34 V/dec to 1.11 V/dec.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.1-7
• /
• 2018

As the performance and density of IC (integrated circuit) devices increase, power and signal integrities in the global interconnects of advanced packaging technologies are becoming more difficult. Thus, the global interconnect technologies should be designed to accommodate increased input/output (I/O) counts, improved power grid network integrity, reduced RC delay, and improved electrical crosstalk stability. This requirement resulted in the fine-pitch interconnects with a low-k dielectric in 3D packaging or wafer level packaging structure. This paper reviews an organic-inorganic hybrid material as a potential dielectric candidate for the global interconnects. An organic-inorganic hybrid material called polysiloxane can provide spin process without high temperature curing, an excellent dielectric constant, and good mechanical properties.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.1-10
• /
• 2024

In this study, a quercetin benton gel (QUERPLEX) that stabilized quercetin was prepared using organo hectorite, and its efficacy was confirmed. In addition, a comparative study was conducted on the stability and effectiveness of applying this to sunscreen cosmetics. It was confirmed that QUERPLEX remained stable without showing crystal precipitation and growth for 4 weeks. As a result of measuring antioxidant activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH), it showed antioxidant activity depending on the concentration, and showed a radical elimination ability of 70% or more at a concentration of 2,500 ppm or more, confirming a significant effect. Anti-inflammatory activity experiments using RAW 264.7 cells confirmed that NO production decreased in a concentration-dependent manner by reducing NO production by 8% at 25 ㎍/mL, 23% at 50 ㎍/mL, and 84% at 100 ㎍/mL. As a result of confirming the stability of the formulation according to the method of quercetin in the sunscreen formulation, the stability of the formulation was improved when quercetin was added directly to the formulation. It also improved the UV protection index on in vitro and in vivo, which is expected to have the potential as a component that can have a new boosting effect on UV protection. These results suggest that organo hectorite is very effective as a quercetin carrier and that it can be applied in cosmetic formulations by not only expressing the efficacy of quercetin but also bringing about additional effects.

• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.293-296
• /
• 1988

Stability of spheroplasts prepared from Saccharomyces cerevisiae D-71, a thermophilic strain and Zygosaccharomyces rouxii SR-S, an osmotolerant strain were studied. Stability of spheroplast from Saccharomyces cerevisiae D-71 was highest in 0.8M KCI and 1.0M sorbitol ; that from Zygosaccharomyces rouxii SR-S was highest in 0.4M KCI and mannitol and that from both strains was less than 10% for sonic oscillation at 20Kc for 60 sec. In centrifugation at 10000 x g for 10 min., stability of spheroplast from Saccharomyces cerevisiae D-71 was 93% and that from Zygosaccharomyces rouxii SR-S was 84%. Breakage of spheroplast from Saccharomyces cerevisiae D-71 was 99% and that from Zygosaccharomyces rouxii SR-S was 55% for UV irradiation with 15W UV lamp at a distance of 20 cm for 60 min.