• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.211-216
• /
• 2017

ZnO nanopowder was synthesized using a relatively facile and convenient glycol process. ZnO nanopowder was successfully synthesized at temperatures as low as $125^{\circ}C$ using zinc acetate as the Zn source and 1,4-butanediol as the solvent. Then, the effects of water content on the growth process and morphological evolution of ZnO powders were investigated using 1,4-butanediol and water as binary solvent mixtures. Using pure 1,4-butanediol at a temperature above $125^{\circ}C$, the prepared hexagonal ZnO nanopowder exhibited a quasi-spherical shape with average crystalline size of approximately 30 - 50 nm. It is also demonstrated that the morphology of ZnO powders can be controlled by the addition of various water content in 1,4-butanediol. With increasing water content, the morphologies of the ZnO powders changed sequentially from quasi-spherical to hexagonal plate and pyramid, and finally to hexagonal prismatic with a pyramidal tip. A sharp peak centered at 384 nm in the UV region and a weak broad peak in the visible region between 450 and 700 nm were shown in the room temperature PL spectra of the ZnO synthesized using the glycol process, regardless of the addition of water, suggesting that ZnO nanopowders with the best crystallinity were obtained under these conditions.

• Journal of Pharmaceutical Investigation
• /
• 제19권3호
• /
• pp.163-171
• /
• 1989

To investigate the protein binding characteristics of cephalothin, the effects of ionic strength, pH and temperature on the binding of cephalothin to bovine serum albumin (BSA) were studied by UV difference spectrophotometric method. With increasing ionic strength at constant PH and temperature, association constant decreased, but the number of binding sites sites was about 2 constantly. It may be deduced that the binding process is not only due to electrostatic forces. And the increased association constant at high ionic strength is explained by conformational changes of BSA from complex to subunits. The pH effect on the affinity of interaction indicated that the binding affinity of drug is higher in the neutral region than in the alkaline region. And, at high pH value, the number of binding sites decreased from 2 to 1 because of the conformational changes of BSA in alkaline region. The decrease in binding affinity of BSA to drug with increasing temperature was characteristic of an exothermic reaction. And the negative sign of ${\Delta}G^{\circ}$ meant that the binding process occurs spontaneously under the experimental conditions. In cephalothin-BSA complex formation, since the net enthalpy change value and entropy change value are positive, it is assumed that hydrophobic bindings are predominant in this binding process.

• Environmental Engineering Research
• /
• 제18권1호
• /
• pp.21-28
• /
• 2013

In this study, the applicability of visible light-emitting-diodes (LEDs) to the photocatalytic degradation of indoor-level trichloroethylene (TCE) and perchloroethylene (PCE) over N-doped $TiO_2$ (N-$TiO_2$) was examined under a range of operational conditions. The N-$TiO_2$ photocatalyst was calcined at $650^{\circ}C$ (labeled N-650) showed the lowest degradation efficiencies for TCE and PCE, while the N-$TiO_2$ photocatalysts calcined at $350^{\circ}C$, $450^{\circ}C$, and $550^{\circ}C$ (labeled as N-350, N-450, and N-550, respectively) exhibited similar or slightly different degradation efficiencies to those of TCE and PCE. These results were supported by the X-ray diffraction patterns of N-350, N-450, N-550, and N-650. The respective average degradation efficiencies for TCE and PCE were 96% and 77% for the 8-W lamp/N-$TiO_2$ system, 32% and 20% for the violet LED/N-$TiO_2$ system, and ~0% and 4% for the blue LED/N-$TiO_2$ system. However, the normalized photocatalytic degradation efficiencies for TCE and PCE for the violet LED-irradiated N-$TiO_2$ system were higher than those from the 8-W fluorescent daylight lamp-irradiated N-$TiO_2$ system. Although the difference was not substantial, the degradation efficiencies exhibited a decreasing trend with increasing input concentrations. The degradation efficiencies for TCE and PCE decreased with increasing air flow rates. In general, the degradation efficiencies for both target compounds decreased as relative humidity increased. Consequently, it was indicated that violet LEDs can be utilized as energy-efficient light sources for the photocatalytic degradation of TCE and PCE, if operational conditions of N-$TiO_2$ photocatalytic system are optimized.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.539-545
• /
• 2016

Alumina added with Mn3O4 up to 7.5 cat% of Mn was prepared by conventional ceramic processing, and the sintering behavior and the optical properties of which were studied as functions of Mn content. Densification and grain growth of alumina were enhanced by Mn addition up to 0.75 cat% but was leveled off at higher concentrations. XRD revealed that $Al_2MnO_4$(galaxite) was formed as a second phase in the specimens with more than 0.75 cat% of Mn. Thus it is believed that either the solid solution effect of Mn or the Zener effect of $Al_2MnO_4$ becomes predominant in the sintering of Mn-added $Al_2O_3$ according to the additive concentration. UV-VIS reflectivity(SCI) spectra of Mn-added $Al_2O_3$ consisted of smooth bottoms in 300~550 nm wavelength range and plateaus at wavelengths longer than 650 nm. The reflectivity spectrum continuously moved downward, and the specimen color became darker and thicker with increasing Mn content. The CIELAB color change with respect to standard white was also dependent on the amount of Mn added: ${\Delta}L^*$(D65) negatively increased and ${\Delta}E_{ab}^*$(D65) positively increased with increasing Mn content, probably due to Mn substitution to Al and/or the mixing effect of black $Al_2MnO_4$ as a second phase.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.831-836
• /
• 2014

One-dimensional (1D) photonic crystals (PCs) were prepared by $TeO_x(2<x<3)/SiO_2$ with the difference refractive index, and fabricated by sputtering technique from a $TeO_2$ and $SiO_2$ target. The $TeO_x$(2$Ar:O_2=40:10$). A 10-pair $TeO_x(2<x<3)/SiO_2$ 1D PCs were fabricated with the structure parameters of filling factor=0.5185, and period=410 nm. The properties of 1D PCs with and without a defect layer were evaluated by UV-VIS-NIR. A normal mode 1D PC have a photonic band gap (PBG) in the near infrared (NIR) region from 1,203 to 1,421 nm. In the case of 1D PC containing a defect layer, a defect level appears at 1,291 nm. The measured transmittance (T) spectra are nearly corresponding to calculated results. After He-Cd laser exposure, the defect level is shifted from 1,291 nm to 1,304 nm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.230-230
• /
• 2010

유기물 반도체 화합물인 Cu-Pc(copper(II)-phthalocyanine)는 우수한 전기적 광학적 특성을 가지며, OLED, MISFET등 소자로서의 활용도가 높다. Cu-Pc 화합물은 $\alpha$-phase, $\beta$-phase, $\gamma$-phase를 포함하는 여러 가지 다결정 polymer로 존재할 수 있다. 가장 잘 알려진 구조로는 열적으로 준안정적인 $\alpha$-phase와 열적으로 안정적인 $\beta$-phase가 있다. Cu-Pc 박막의 구조 및 흡수 특성과 전기적 특성에 대한 기술이 확실히 규명되지 않아 본 연구에서는 두께와 열처리 조건에 따른 결정성 및 방향성을 조사하기 위하여 $\alpha$-phase와 $\beta$-phase의 phase transition 현상 및 전기적 광학적 특성을 규명 하고자 한다. 진공증착 방법 중 하나인 PVD 방법의 thermal evaporation deposition을 이용하여 glass, ITO 기판위에 두께와 열처리에 따른 전기적?광학적 특성을 연구하였다. Cu-Pc 박막의 성장두께는 5nm~50nm 이내로 fluxmeter 및 thickness monitor를 이용하여 제어하였다. 5nm~50nm의 두께에 따른 기판온도를 $200^{\circ}C$로 고정하여 전열 처리 및 후열 처리하여 온도에 따른 박막을 성장한 후, 결정 구조 및 특성 변화와 phase transition 분석하였다. 제작된 Cu-Pc의 박막은 $\alpha$-phase와 $\beta$-phase로 구분할 수 있으며, 열처리에 따른 phase transition 현상이 뚜렷함을 알 수 있다. XRD(X-ray diffraction)를 통하여 박막에 대한 결정 구조 분석 및 FE-SEM(field emission scanning electron microscopy)와 AFM(atomic force microscopy)을 이용하여 Cu-Pc 박막의 구조적 결정성과 방향성 등, 표면 상태와 형상구조에 대해 표면의 특성을 측정하며, 광 흡수도(UV-visible absorption spectra)을 이용하여 phase transition 현상에 따른 I-V 특성을 비교분석 하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.204.2-204.2
• /
• 2013

Wide band gap II-VI semiconductors have attracted the interest of many research groups during the past few years due to the possibility of their applications in light-emitting diodes and laser diodes. Among the II-VI semiconductors, ZnO is an important optoelectronic device material for use in the violet and blue regions because of its wide direct band gap (Eg ~3.37 eV) and large exciton binding energy (60 meV). F-doped ZnO (FZO) and undoped ZnO thin films were grown onto quartz substrate by the sol-gel spin-coating method. The doping level in the solution, designated by F/Zn atomic ratio of was varied from 0 to 5 in 1 steps. To investigate the effects of the structure and optical properties of FZO thin films were investigated using X-ray diffraction (XRD), UV-visible spectroscopy, and photoluminescence (PL). In the XRD, the residual stress, FWHM, bond length, and average grain size were changed with increasing the doping concentration. For the PL spectra, the high INBE/IDLE ratio of the FZO thin films doping concentration at 1 at.% than the other samples.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.203.1-203.1
• /
• 2013

Zinc oxide (ZnO) nanocrystalline thin films on various growth temperatures for active layer and different buffer layer thickness were grown by plasma-assisted molecular beam epitaxy (PA-MBE) on Si substrates. The ZnO active layer were grown with various growth temperature from 500 to $800^{\circ}C$ and the ZnO buffer layer were grown for different time from 5 to 40 minutes. To investigate the structural and optical properties of the ZnO thin films, scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescence (PL) spectroscopy were used, respectively. In the SEM images, the ZnO thin films have high densification of grains and good roughness and uniformity at $800^{\circ}C$ for active layer growth temperature and 20 minutes for buffer layer growth time, respectively. The PL spectra of ZnO buffer layers and active layers display sharp near band edge (NBE) emissions in UV range and broad deep level emissions (DLE) in visible range. The intensity of NBE peaks for the ZnO thin films significantly increase with increase in the active layer growth temperature. In addition, the NBE peak at 20 minutes for buffer layer growth time has the largest emission intensity and the intensity of DLE peaks decrease with increase in the growth time.

• 대한수의학회지
• /
• 제33권4호
• /
• pp.605-609
• /
• 1993

항암치료의 조절인자로서 중요시되는 활성엽산대사물의 장간(腸肝)순환동태를 규명하기 위해 랫드에 $[^3H]pteroylglutamic$ acid(PteGlu)를 정맥주사한 후 고성능 액체 크로마토그래피법(HPLC)을 이용해 담즙중 활성대사물에 관해 조사하였다. HPLC-liquid scintillation counting법의 분석결과, 현저한 다섯개의 방사활성 피크가 출현, 이들은 $H_4PteGlu$, $10-HCO-H_4PteGlu$, $5-CH_3-H_4PteGlu$와 paraaminobenzoyl glutamate(pABG), PteGlu로 각각 동정되었다. 전자 3물질의 활성엽산대사물의 동정은 표준물질과의 비교분석에 의해 HPLC-전기화학검출기를 이용한 retention time profile 및 hydrodynamic, Voltammogram의 일치성 그리고 HPLC-photodiode array분석에 의한 흡광스펙트럼의 일치성에 근거하였다. 후자 그 물질의(pABG 및 PteGlu) 동정은 흡광스펙트럼의 일치성에 근거하였다. 랫드 담즙중$[^3H]PteGlu$의 활성엽산대사물로서 $H_4PteGlu$의 존재가 처음으로 밝혀졌다.

• 한국식품과학회지
• /
• 제32권5호
• /
• pp.985-990
• /
• 2000

${\zeta}-Carotene$를 dichloromethane에 용해하고 dry ice 상에서 ozonolysis을 행하였다. Ozonolysis에 의해 생성된 화합물은 silica gel chromatography를 행하여 분획하고, photodiode array detector를 이용하여 ODS-HPLC로 분석하였다. Toluene에 ${\zeta}-carotene$을 용해하고 $37^{\circ}C$, 72시간 자동산화시킨 결과, 다수의 carbonyl 및 acidic화합물이 생성되었다. ${\zeta}-Carotene$의 자동산화로부터 생성된 carbonyl 화합물의 대부분은 ozonolysis에 의하여 얻어진 산화개열산물이 나타내는 HPLC상의 거동과 분광학적 특성이 서로 잘 일치하였다. 또한 ${\zeta}-carotene$의 자동산화에 의해 생성된 중앙개열 acidic 화합물은 생물활성을 나타내는 4,5-didehydrogeranyl geranyl acid 표준품과 동일한 분광학적 특성을 나타냈다. 이러한 결과는 in vitro상의 산화적 조건하에서 ${\zeta}-carotene$ 자동산화에 의해 eccentric cleavage가 생성됨을 알 수 있었다.