• 전기학회논문지P
• /
• 제56권2호
• /
• pp.83-89
• /
• 2007

The LC filter design procedure of the inverter output filter is described. The transfer function of the filter output voltage to the load current is described with the capacitor value and the system time constant considering the system controller. By using the closed form of the relation between the filter capacitor value and the system time constant, the capacitor value can be calculated with the given system time constant and vice versa. It is more practical for the implementation of power and control circuit of inverter. And as the effect of the load current to the voltage distortion can be calculated from the closed form, it is possible to analyze the system how much the voltage waveform is distorted in case of the nonlinear load. All the proposed design procedure is verified with the simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.550-552
• /
• 1994

Recently, various activ filters such as current type and voltage type have been proposed to suppress harmonics caused by nonlinear load due to the use of semiconductor switching devices. At the early stage, active filters are used only to suppress harmonics. However, it has been proposed that they offer more functions such as voltage regulations, improvements of power factor and 3 phase unbalance. This study presents a combined function of active filter and a UPSs with one power processing stage.

• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.99-103
• /
• 2009

본 논문에서는 부하설비의 정전 시간을 최소화하기 위한 전력량계 무정전 교체 장치를 고안하여 개발하였다. 개발된 교체 장치는 전력량계 교체 시 정전을 피하기 위해 시행되고 있는 단순 우회회로 결선방법, UPS 사용법 등, 다른 방법들에 비해 간편하여 효율성을 증대하였다. 그리고 교체 작업동안 안전성을 확보하기 위하여 보호 요소들을 구성함으로써 신뢰성 또한 증대하였다. 본 장치의 적용으로 고객에게 정전 시간을 단축하여 신뢰성 있는 전력공급을 보장할 수 있게 되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.511-515
• /
• 1996

A remote controlled mobile robot system has been developed and tested to monitor the radiation area in the nuclear power plant. The mobile robot system operates according to car-driving-like commands and is capable of radiation measurement and visual inspection in unmanned situations under radiation. The robot system is equipped with a radiation sensor and two cameras with appropriate illumination set-ups. The camera with auto-focus function and 8-times zoom lens is mounted on the pan/tilt rotational base and the other is mounted on the front panel of the robot system. All commands regarding the motion of the mobile robot and various sensors are given through the monitoring system which is designed to provide an integrated man-machine interface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.235-238
• /
• 2006

Interface formation between $12CaO{\cdot}7Al_2O_3(C12A7:e^-)$ and Alq3 was investigated using in-situ ultra-violet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). The work function and vacuum level shift of $C12A7:e^-$ were change by different surface treatment from 2.6eV to 4.2eV. Also vacuum level shift $(\Delta)$ at the interface were from +0.3eV to -0.3eV.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.38-42
• /
• 2002

An apparatus was developed to repetitively apply a $-196^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen ($LN_2$) 400 times. Ply-by-ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at $120^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies fellowed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5%.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제8권2호
• /
• pp.81-93
• /
• 2004

This study investigated three preservice teachers' mathematical problem solving among hand-in-write-ups and final projects for each subject. All participants' activities and computer explorations were observed and video taped. If it was possible, an open-ended individual interview was performed before, during, and after each exploration. The method of data collection was observation, interviewing, field notes, students' written assignments, computer works, and audio and videotapes of preservice teachers' mathematical problem solving activities. At the beginning of the mathematical problem solving activities, all participants did not have strong procedural and conceptual knowledge of the graph, making a model by using data, and general concept of a sine function, but they built strong procedural and conceptual knowledge and connected them appropriately through mathematical problem solving activities by using the computer technology.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.151-155
• /
• 2003

An apparatus was developed to repetitively apply a -196 $^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen (L$N_2$) 400 times. Ply-by-Ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at 120 $^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies followed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5 %.

• 품질경영학회지
• /
• 제22권4호
• /
• pp.59-78
• /
• 1994

In some observational studies, we have often random censoring model. However, the data available may be partially observable censored data consisting of the observed failure times and only those nonfailure times which are subject to follow up. In this paper, we present an extension of the problem of partially parametric estimation of the survival function to such partially observable censored data. The proposed estimator treats the observed failure times nonparametrically and uses a parametric model only for those nonfailure times which are subject to follow-up. We discuss the motivation and construction of the proposed estimator and investigate the limiting properties of the proposed estimator such as asymptotic normality. Also, when the assumed parametric model is exponential, the asymptotic variance of the estimator is obtained. Furthermore, an example is given to compare the proposed estimator with the modified Kaplan Meier(MKM) estimator. From the results, it is shown that the relative efficiency of the proposed estimator is higher than that of the MKM estimator in the follow-up study with increasing time.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.336-340
• /
• 1998

In this paper, an effective control scheme of a single phase UPS inverter is proposed to have no steady state error of the output voltage and the fast response for the load request. The cosine wave tranfer function is proposed to control the output voltage. This controller clearly removes errors of magnitude and phase both in the steady state. On the other hand, a current controller is proposed to reduce the transient time of the voltage control and to improve the bad distorted factor of the output voltage waveform by the load fluctuation and the presences of nonlinear parameters in the plant. The current controller is designed parallel to the voltage controller and performs separately from it.