• Anxiety and mood
• /
• v.8 no.1
• /
• pp.41-49
• /
• 2012

Introduction : Suicide in Korea has increased to 31.2 persons per 100,000 population, the world's highest level. Suicide is the 10th leading cause of death in the world, but in Korea, it is 4th leading cause of death. Therefore suicide is a serious problem in Korea. Many suicide prevention strategies have been proposed. Despite efforts to prevent suicides in Korea, a steady increases in the number of suicides has been brought into question the effectiveness of suicide prevention activities in Korea. Methods : Strategy of restricting suicide methods in many countries was reviewed. Systematic approach to restrict suicidal methods in Korea is proposed. Results : Restricting suicide methods is one of the effective suicide prevention strategies employed in the UK and other countries. Since many suicides occur impulsively, suicide attempt lethality is an important factor in determining the rate of deaths in suicidal attempts. Physical restriction of suicide methods is important in preventing suicide, but restriction of cognitive access to information about suicide and suicide method is more important in preventing suicide. In particular hanging is one of the most common methods of suicides in Korea, it is crucial to develop strategies to prevent suicide by hanging cognitively. Also information about suicide should be properly controlled. To do this, suicide news reporting guidelines should be observed, and website makers whose websites provoke thoughts about suicide should be more strictly sanctioned. Conclusion : Restricting suicide methods along with other suicide prevention plans may be the most effective way to prevent suicide in Korea.

• Knowledge Management Research
• /
• v.21 no.4
• /
• pp.265-285
• /
• 2020

The inbound tourism market is recognized as a vital sector of the tourism industry today, but it is highly volatile due to each country's economic, social, and cultural variables. The causes of volatility vary according to the inbound country, and we intend to revitalize the stabilized tourism industry by minimizing risks. In this study, the portfolio theory was applied to derive the optimal combination for each country to achieve the minimum risk level's maximum growth rate. The number of inbound travelers and the average expenditure per person was simultaneously applied. As a result of the analysis, the best mix by country based on the number of inbound travelers was the UK, the United States, Germany, China, and Japan. Based on average spending, each country's best combinations were Thailand, Middle East, Singapore, Japan, Russia, Hong Kong, and Germany. It is expected to be able to establish a plan to operate the Korean inbound tourism market strategically.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.408-426
• /
• 2020

This study aims to establish the national strategy for biodiversity conservation by analyzing the current status of ecodiversity as the foundation of biodiversity conservation. Furthermore, this study has another purpose of preparing the measures for conservation and restoration of biodiversity. Ecodiversity was discussed as the basis for conserving biodiversity. Five climate zones and 14 climatic regions, eight plant geographic regions, three massifs and major geologic series, horizontal and vertical topographic conditions, 16 ecoregions, major ecosystems including forest, river and streams, wetlands, coast and marine, agriculture, and urban esosystems, and land use types were discussed as the element of the ecodiversity. In terms of biodiversity conservation, the actual conditions of each ecological unit were reviewed and measures were proposed to reduce biodiversity loss. Destruction and fragmentation of habitat, poor ecosystem management due to socioeconomic changes, the effects of exotic species and chemicals, and climate change were discussed as the major factors causing biodiversity loss. Systematic monitoring based on scientific principles and ecological restoration based on those monitoring results were recommended as measures for biodiversity conservation.

• Korean Journal of Comparative Education
• /
• v.18 no.4
• /
• pp.27-55
• /
• 2008

Since quality assurance and enhancement (QAE) raises the fundamental issue of the survival of higher education institutions and national competitiveness, guides on quality assurance (QA) are popular both domestically and worldwide. Despite the focus in many countries on trying to establish and implement QA systems, no clear investigation has been conducted on what actually happens in the institutions. Therefore, the present study examines the quality control system of the UK at an institutional level by focusing on the case of Scotland QAE. As Scottish QAE especially emphasizes student engagement and quality culture, this study investigates the present QAE situation in the institution and current ideas for better future practices by analyzing the perceptions of internal stakeholders' from the University of Edinburgh, School of Education, based on the stakeholder theory and implications for other contexts. The stakeholder analysis results demonstrate the successful application of QAE with a high level of understanding and stakeholder interest. However, the current strategy is missing certain opportunities for staff and students. Therefore, further information disclosure, formative evaluation, better communication and administrational supports are required for improved practice.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.6
• /
• pp.390-395
• /
• 2013

Locoregional recurrence of tongue cancer is higher than that of other sites of the oral cavity. Locoregional control has shown improvement over the past 20 years, however, a high rate of recurrence and second primary tumor occurrence is still frequently reported. Leukoplakia is a clinical term, which describes a whitish lesion of the oral cavity. Clinicopathologic features may range from hyperkeratosis to malignancy. Because of its diverse pathologic characteristics, management of this lesion for diagnosis, treatment planning, establishment of a clear surgical margin, and periodic follow-up is difficult. We report on a case of successfully treated tongue cancer which developed from leukoplakia over 10 years. Periodic follow-up strategy and surgical planning are most important to management of locoregional recurrence.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.151.1-151.1
• /
• 2010

우리나라의 신재생에너지 기술개발은 2008년 '저탄소 녹색성장' 국가 비전 선포 이후 국가 에너지 R&D 전략의 중심에 자리 잡고 있다. 이미 우리의 경쟁 대상인 선진국들은 신재생에너지 기술을 중심축으로 녹색산업을 신성장 동력으로 활용하고자 국력을 집중하고 있다. 우리나라는 선진국과 비교할 때 상대적으로 신재생에너지 기술개발 후발자이다. 기술적 핸디캡을 극복하고 대등한 경쟁에 뛰어들기 위해서는 신재생에너지 기술보유 선진국과의 국제협력을 통한 시너지효과 창출이 필요하다. 이는 최고수준의 국가 및 기관들과 협력을 도모함으로써 기술개발 기간 단축은 물론 조기 기술격차 해소가 가능하기 때문이다. 이러한 국가간 상호협력을 위해서는 무엇보다 기술 분야별 선진국 수준과 우리의 수준에 대한 객관적인 분석이 필요하다. 이를 위해 주요 신재생에너지 기술들을 대상으로 심층적인 전문가 조사를 통해 전세계 주요 국가 및 관련 업체들의 기술수준 및 협력 선호 유형을 분석하였다. 이에 더해 관련 기술 시장 상황을 고려하여 기술별 국제 협력 추진 전략을 시장주도형 모델과 공동연구형 모델로 나누어 수립하였다. 수립된 전략을 바탕으로 신재생에너지 기술 국제협력 활성화를 위한 정책 추진 방향을 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.620-622
• /
• 2004

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and the floor decreases suddenly, the robot has a slip state. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. First of all, this paper shows that conventional PI control can not be applied to a wheeled robot of the light weigh. Secondly, reposed fuzzy logic applied by the Takagi-Sugeno model for the configuration of fuzzy sets. For the design of Takaki-Sugeno model and fuzzy rule, proposed algorithm uses FCM(Fuzzy c-mean clustering method) algorithm. In additionally, this algorithm controls recovered driving torque for the restrain the re-slip. The proposed fuzzy logic controller(FLC) is pretty useful with prevention of the slip phenomena through that compare fuzzy with PI control for the controller performance in the re-adhesion control strategy. These procedures are implemented using a Pioneer 2-DXE wheeled robot parameter.

• Journal of Information Technology Applications and Management
• /
• v.15 no.4
• /
• pp.221-245
• /
• 2008

Recently, mobile internet technologies are enabling the possibility of radically new computing services which can share information and communicate with others on the move. In this situation, prior studies have attempted to identify of what factors make people use mobile internet. However, prior researches focused on investigating the factors affecting users' adoption to Mobile Internet. In order to offer beneficial materials to mobile internet companies, we investigated important factors to increase mobile users' value from the viewpoints of customer. In particular, this study was progressed how characteristics of mobile contents affect users' intrinsic attributes and how perceived users' network effects affect users' value in the mobile computing environments. To empirically test proposed hypotheses, we have analyzed 285 survey data gathering from mobile internet users and verified hypotheses by using SEM (structural equation modeling). Based on the results of this study, we found that content accessibility and content quality have significant impacts on users' intrinsic attributes such as perceived usefulness and perceived enjoyment. In addition, this study also revealed that perceived usefulness and perceived enjoyment were positively related to users' emotional value. Moreover, this study found that perceived users' network effects could affect users' monetary value by mediating expected benefits. Based on our findings, we can understand that this perspective can provide a deeper understanding of the mobile users' value adoption by bridging the gap between mobile internet studies and actual practice.

• Journal of Information Technology Applications and Management
• /
• v.27 no.3
• /
• pp.77-92
• /
• 2020

As mobile shopping has been increasing, the competition has been also increasing to satisfy various consumers' needs. Despite such increase in terms of the volume of the consumers who use mobile shopping, there has been very few studies to examine characteristics of mobile shopping malls. The purpose of this empirical study is to investigate the effect of characteristics of mobile shopping malls on consumer loyalty and the interaction effect of the O2O experience on the relationship between the characteristics of mobile shopping malls and consumer loyalty. Using a sample of 276 individuals who have experienced mobile shopping, we found that certain characteristics such as ubiquity, personalization, or convenience have a positive impact on consumer loyalty and a design characteristic solely has an interaction effect on consumer loyalty. As consumer loyalty has a critical factor on mobile shopping mall's profit, examining which factor has a positive effect on consumer loyalty is beneficial for mobile shopping malls. The results of the study have both practical and empirical implications.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2014

Purpose: As the number of people directly employed in making things declines, the cost of labour as a proportion of the cost of production and delivery will diminish too. This will make to move the focus of quality management because new manufacturing techniques make it cheaper and faster to respond to changing local tastes Methods: This discussion is induced by understanding that change the point of view of quality. Results: Mark-processing method using a mold of 3D-printer is different from traditional manufacturing methods. Design, rapid prototyping of products produced by the right way, many changes in many industries will be created. Therefore, the design will be more emphasis on the importance of quality. Conclusion: As manufacturing goes digital, a Quality great change is now gathering pace. It will allow things to be made economically in much smaller numbers, more flexibly and with a much lower input of labour, thanks to new materials, completely new processes such as 3D printing. So we must change the vantage point of quality, from process to Design, R&D, and Delivery.