• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.170-176
• /
• 2017

In recent years, Unmanned Aerial Vehicles (UAVs) were actively developed in various fields. In development process of UAVs, flight test is performed to ensure that minimum safety requirements and technical requirements are met. By constructing flight test infrastructure such as takeoff and landing facilities, operation procedure, and equipments, flight test can be performed effectively. In this paper, operation procedures of civil UAV's flight test are proposed. The procedures proposed are composed by two main steps: first, planning and permitting procedure of flight test. Secondly, execution and control procedure of flight test.

• Journal of Intelligence and Information Systems
• /
• v.11 no.3
• /
• pp.45-55
• /
• 2005

In this paper, we propose a method to a synchronization of chaotic UAVs(Unmanned Aerial Vehicle) that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. The proposed methods are assumed that if one of two chaotic UAVs receives the synchronization command, the other UAV also follows the same trajectory during the chaotic UAVs search on the arbitrary surface.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.118-122
• /
• 2013

In this study, We show that multiple UAVs (Unmaned Air Vehicle) have datalink system which includes the IEEE 802.11b technology. we are predicting and calculating to the number of the UAV and data rate between UAV and ground control system, using the IEEE 802.11 standards which include the transmit/receive the delay time and theoretical maximum throughput (TMT).

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.103-113
• /
• 2011

This research is to select a path planning algorithm to maximize survivability for Unmanned Aerial Vehicle(UAV). An UAV is a powered pilotless aircraft, which is controlled remotely or autonomously. UAVs are currently employed in many military missions(surveillance, reconnaissance, communication relay, targeting, strike etc.) and a number of civilian applications(communication service, broadcast service, traffic control support, monitoring, measurement etc.). In this research, a mathematical programming model is suggested by using MRPP(Most Reliable Path Problem) and verified by using ILOG CPLEX. A path planning algorithm for UAV is selected by comparing of SPP(Shortest Path Problem) algorithms which transfer MRPP into SPP.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.7-14
• /
• 2005

This paper describes development of automatic flight control system for an unmanned target drone. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed. The performance of automatic flight control system is verified by flight test.

• Journal of Advanced Information Technology and Convergence
• /
• v.8 no.2
• /
• pp.101-110
• /
• 2018

This paper introduces feedback linearization (FL) based adaptive sliding mode control (ASMC) effective against ground effects of the quadrotor UAV. The proposed control has the capability of estimation and effective rejection of those effects by adaptive mechanism, which resulting stable attitude and positioning of the quadrotor. As output variables of quadrotor, x-y-z position and yaw angle are chosen. Dynamic extension of the quadrotor dynamics is obtained for terms of roll and pitch control input to be appeared explicitly in x-y-z dynamics, and then linear feedback control including a ground effect is designed. A sliding mode control (SMC) is designed with a class of FL including higher derivative terms, sliding surfaces for which is designed as a class of integral type of resulting closed loop dynamics. The asymptotic stability of the overall system was assured, based on Lyapunov stability methods. It was evaluated through some simulation that attitude control capability is stable under excessive estimation error for unknown ground effect and initial attitude of roll, pitch, and yaw angle of $30^{\circ}$ in all. Effectiveness of the proposed method was shown for quadrotor system with ground effects.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.153-160
• /
• 2010

Air Data Recording System (ADRS) is the flight data recorder for the SmartUAV development. ADRS of the low cost designed for the SmartUAV has been developed and tested through the ground test. ADRS is the reconstructing data acquisition system and can be programmed automation controller. This paper focuses on the design aspects of the hardware and software. The hardware aspects of the ADRS include details about the hardware configurations for the interfaces with the Digital Flight Control Computer(DFCC) and sensors, components modifications. The software section describes the ADRS Operating System(OS) and data flow for archived files. Finally, ADRS-based results of the SmartUAV that include the Iron-bird test, system interface test and ground test are presented.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.631-640
• /
• 2016

A dual-mode power management for a hybrid-electric UAV with a cruise power of 200W is proposed and empirically verified. The subject vehicle is a low-speed long-endurance UAV powered by a solar cell, a fuel cell, and a battery pack, which operate in the same voltage bounds. These power sources of different operational characteristics can be managed in two different methods: passive management and active management. This study proposes a new power management system named PMS2, which employs a bypass circuit to control the individual power sources. The PMS2 normally operates in active mode, and the bypass circuit converts the system into passive mode when necessary. The output characteristics of the hybrid system with the PMS2 are investigated under simulated failures in the power sources and the conversion of the power management methods. The investigation also provides quantitative comparisons of efficiencies of the system under the two distinct power management modes. In the case of the solar cell, the efficiency difference between the active and the passive management is shown to be 0.34% when the SOC of the battery is between 25-65%. However, if the SOC is out of this given range, i.e. when the SOC is at 90%, using active management displays an improved efficiency of 6.9%. In the case of the fuel cell, the efficiency of 55% is shown for both active and passive managements, indicating negligible differences.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.46-53
• /
• 2007

In this paper, a guidance law for vision-based automatic landing of unmanned aerial vehicles (UAVs) is proposed. Automatic landing is a challenging but crucial capability for UAVs to achieve a fully autonomous flight. In an autonomous landing maneuver of UAVs, the decision of where to landing and the generation of guidance command to achieve a successful landing are very significant problem. This paper is focused on the design of guidance law applicable to automatic landing problem of fixed-wing UAV and rotary-wing UAV, simultaneously. The proposed guidance law generates acceleration command as a control input which derived from a specified time-to-go ($t_go$) polynomial function. The coefficient of $t_go$-polynomial function are determined to satisfy some terminal constraints. Nonlinear simulation results using a fixed-wing and rotary-wing UAV models are presented.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.305-308
• /
• 2009

최근 카메라와 같은 센서가 장착된 UAV(Unmanned Aerial Vehicle, 무인항공기)를 이용하는 분야는 방재, 농업, 군사 분야 등 매우 다양해지고 있다. 그러나 고품질의 영상데이터를 취득하기 위해서는 가벼우면서도 우수한 성능을 지닌 고가의 MEMS 센서 그리고 센서가 안정적으로 데이터를 획득할 수 있도록 안정적인 비행이 가능한 대형 UAV플랫폼으로 구성된 시스템이 필요하기 때문에 시스템 구축비용이 클 수밖에 없다. 본 연구에서는 저비용으로 영상 데이터를 취득할 수 있는 UAV시스템을 구축하여 취득된 영상데이터의 처리를 통해 얻어지는 영상의 품질을 살펴보고 그 효용성을 시험해보았다. 이를 위해서 고가인 UAV를 대신해 비교적 가격이 저렴한 R/C헬기(Remote Control, 원격조종 헬기)를 플랫폼으로 선정하고, 영상데이터를 수집하는 카메라센서를 탑재하였다. 그리고 탑재된 센서가 안정적으로 데이터를 취득할 수 있도록, 센서와 플랫폼 사이에 Gimbal을 장착하였다. 이렇게 구축된 시스템을 이용하여 시험비행을 해보았으며, 그 결과 플랫폼에 탑재된 센서로부터 비교적 안정적이고 양질의 이미지를 획득할 수 있었다. 본 연구에서 구축한 R/C 헬리콥터 시스템을 통하여 저비용/고효율의 영상데이터를 취득할 수 있음을 확인하였다. 구축된 시스템은 근접한 거리에서 대상물의 영상을 취득하기 때문에 고품질의 3차원 모델데이터 생성에 매우 도움이 될 것으로 생각한다.