• Land and Housing Review
• /
• v.15 no.1
• /
• pp.135-146
• /
• 2024

This study predicts the means sharing ratio of the urban air transportation (UAM) when the VertiHub of the UAM in the southern western part is built at Songjeong Station in Gwanju. Based on Monte Carlo simulation of the utility function and means selection logit model for each means of transportation, our findings indicate an average mode share of 0.95%, with a variability range from 0.07% to 4.7%. Moreover, 95% of the simulation outcomes fall below a 2.02% mode share. Sensitivity analysis, conducted via Tornado Plot, highlights that the mode share is principally influenced by factors such as the unit fare, cost parameter, basic fare, and the time required for takeoff and landing. Notably, a negative correlation exists for unit fare, basic fare, and takeoff and landing time, suggesting the necessity of setting an appropriate level of fair to enhance UAM utilization.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.1-6
• /
• 2022

Recently, the development of UAM, which was named by NASA as an alternative to solve the traffic and environmental problems caused by the rapidly progressing urbanization. When designing UAM, the location of lift fans greatly affects the core technology of the eVTOL type, distributed electric propulsion technology and aerodynamic performance of the vehicle. In this paper, a hybrid UAM model was designed using OpenVSP, an open source aircraft configuration modeling program, and aerodynamic analysis was performed according to the lift fans position change by the vortex lattice method. As a result, it is confirmed that the flight parameters and trailing wakes are stable by fixing the lift fan with the state rotated 0° to the flow direction of the aircraft during cruise flight. Also, OpenVSP is a suitable tool to be used in aircraft configuration modeling and design.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.380-392
• /
• 2022

In this paper, the new vertiport regulations of the FAA and EASA are analyzed for urban air mobility(UAM), and the major components of the vertipad and the new specifications of each component are analyzed, and UAM operation in various environments is analyzed. Additional components for vertiport and regulations for surrounding airspace were also reviewed. Afterwards, based on the size of the S-A1 aircraft being developed by Hyundai Motors, domestic vertiport specifications and layouts were investigated for UAM operation, and these were applied to the city of Incheon. In addition, the time required for using a taxi or car were compared with the time required for using UAM between major locations in Incheon and Seoul.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.3-20
• /
• 2022

Recently, prior to the commercialization of urban air mobility (UAM), the importance of R&D for air transportation-related industries in urban areas has significantly increased. To create a UAM environment, research is being conducted on personal air vehicles (PAVs). They are key means of air transportation, but research on the physical factors influencing their passengers is relatively insufficient. In particular, because the PAV is expected to be used as a living space for the passengers, research on the effects of the physical elements generated in the PAV on the human body is essential to design an interior space that supports the in-vehicle activities of the passengers. Therefore, the purpose of this study is to derive the constraint factors that affect the human body due to the air navigation characteristics of the PAV and to understand the impact of these constraint factors on the bodies of the passengers performing in-vehicle activities. The results of this study indicate that when the PAV was operated at less than 4,000 ft, which is the operating standard, the constraint factors were noise, vibration, and motion sickness caused by low-frequency motion. These constraint factors affect in-vehicle activity; thus, the in-vehicle activities that can be performed in a PAV were derived using autonomous cars, airplanes, and PAV concept cases. Furthermore, considering the impact of the constraint factors and their levels on the human body, recommended constraint factor criteria to support in-vehicle activities were established. To reduce the level of impact of the constraint factors on the human body and to support in-vehicle activity, the seat's shape and built-in functions of the seat (vibration reduction function, temperature control, LED lighting, etc.) and external noise reduction using a directional speaker for each individual seat were recommended. Moreover, it was suggested that interior materials for noise and vibration reduction should be used in the design of the interior space. The contributions of this study are the determination of the constraint factors affecting the in-vehicle PAV activity and the confirmation of the level of impact of the factors on the human body; in the future, these findings can be used as basic data for suitable PAV interior design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.233-241
• /
• 2021

As increasing the feasibility of the eVTOL UAM(electric vertical take-off and landing urban air mobility), numerous corporations and laboratories are conducting researches. In the aircraft development process, estimating the cost of the aircraft is essential part in terms of budgeting and commercial viability analysis. However, it is difficult to predict the cost of an eVTOL UAM owing to various configurations and little open cost information. This paper presents a novel method to predict the vehicle cost of various eVTOL configurations by modifying previous studies of the aircraft cost estimation. A vehicle cost of Wisk Cora is calculated by the presented method as an example to illuminate the method. The method is indirectly validated by comparing the vehicle costs of six representative eVTOL aircraft with those from the UAM study reports.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.599-608
• /
• 2022

Urban air mobility (UAM) equipped with rotor system is subject to ground effect at vertiport during takeoff and landing. The aerodynamic performance of the aircraft in ground effect should be analyzed for the safe operation. In this study, The ground effects on the aerodynamic performance and wake structure of the quadcopter electric vertical takeoff and landing (eVTOL) configuration equipped with coaxial counter-rotating propellers were investigated by using the lattice Boltzmann method (LBM). The influence of the ground effect was observed differently in the upper and lower propellers of the coaxial counter-rotating propeller system. There was no significant change in the aerodynamic performance of the upper propeller even if the propeller height above the ground was changed, whereas the averaged thrust and torque of the lower propeller increased significantly as propeller height decreased. In addition, the amplitude of the thrust fluctuation tended to increase as the propeller height decreased. The propeller wake was not sufficiently propagated downstream and was diffused along the ground due to the outwash flow developed by the ground effect. The impingement of the rotor wakes on the ground and a fountain vortex structure were observed.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.690-698
• /
• 2023

Information sharing and decision making between airport stakeholders became possible after the introduction of airport cooperative making system (A-CDM). This also resulted in optimizing aircraft handling time and increased the efficiency of aircraft operations. Technological advances have recently led to the development of urban air mobility (UAM) which is a small aircraft taking off and landing vertically. It is emerging as a new air transportation system in the future due to its advantage of saving time and solving congestion problem in the urban area. This study aims to suggest how vertiport cooperative decision making system (V-CDM) should be managed for efficient operation of UAM. By establishing procedure for decision making system based on Vertiport ecosystem of UAM. By establishing procedure for decision making system based on Vertiport ecosystem and UAM aircraft, unnecessary flight delays or cancellations can be minimized and efficiency of UAM operation will be improved as well.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.64-78
• /
• 2023

This paper introduces urban air mobility (UAM) and the definition and types of vertiports required for UAM operations. It also examines domestic policy trends related to UAM and identifies UAM routes in Seoul currently planned by the government. To do so, we reviewed prior research on vertiports, analyzed new regulations from the European Aviation Safety Agency, and studied domestic vertiport specifications and deployment plans for UAM operations based on the size of the S-A1 airframe being developed by Hyundai, and applied them to Samsung Station, the core area of the demonstration routes. Next, using the 'Travel Time Savings Ratio', a method for evaluating transportation economics, we compared and analyzed the time taken by passenger vehicles and the time saved by using UAMs to derive a highly economical demonstration route. As a result, the Samsung Station↔Cheongnyangri Station section was found to be the most efficient. These findings are expected to be utilized for adjusting the distribution of UAMs when operating the demonstration route in the future.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.24-32
• /
• 2021

Personal Air Vehicle (PAV), Cargo UAS (Cargo UAS), and existing manned and unmanned aircraft are key vehicles for urban air mobility (UAM), and should demonstrate compatibility for the design of aircraft systems. The safety assessment required by for certification to ensure safety and reliability should be systematically performed throughout the entire cycle from the beginning of the aircraft development process. However, with the increasing complexity of safety critical aviation systems and the application of state-of-the-art systems, conventional experience-based and procedural-based safety evaluation methods make ir difficult to objectively assess safety requirements and system safety. Therefore, Model-Based Safety Assessment (MBSA) using modeling and simulation techniques is actively being studied at domestic and foreign countries to address these problems. In this paper, we propose a Model-Based Safety Evaluation framework utilizing modeling and simulation-based integrated flight simulators. Our case studies on the Traffic Collision Availability System (TCAS) and Wheel Brake System (WBS) confirmed that they are practical for future safety assessments.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.77-95
• /
• 2023

In this study, the conceptual design of a tilt + stopped rotor type electric vertical take-off and landing (eVTOL) aircraft was performed using design iteration. Based on Hyundai Motor's S-A1, the mission profile was defined using the concept of urban air mobility (UAM), and configuration design and aerodynamic analysis were performed using OpenVSP and XFLR5 software. After estimating the required power for the designed eVTOL, the required performance of the battery and the maximum take-off weight (MTOW) were calculated. . It was iteratively calculated using Microsoft Excel and Visual Basic Application, and a new electric motor weight estimation formula was derived. Also, the sensitivity analyses of each design variables of an eVTOL was performed using the automated program.