• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.226-236
• /
• 2021

Objectives: Concerns have been raised about the possible health effects of radon on both workers and consumers with the spread of social attention to the impact of radon exposure. Thus, an entire raw material handling workshop was investigated, and standards for radon levels in the workplace were newly established at 600 Bq/m³. However, regulations on the management of workers exposed to radon are still insufficiently developed. Therefore, by comparative analysis of overseas and domestic radon-related regulations for workplaces, this study aims to suggest improvement plans of protection regulations under the Occupational Safety and Health Act (OSH Act) for the prevention of health disorders of radon-exposed workers. Methods: For overseas case studies, we consulted radon-related laws and reports officially published on the websites of the European Union (EU), the United States (U.S.) and the United Kingdom (UK) government agencies. Domestic law studies were conducted mainly on the Act on Protective Action Guidelines against Radiation in the Natural Environment and the OSH Act. Results: In Europe, the basic safety standards for protection against risks arising from radon (Council Directive 2013/59/EURATOM of 5 December 2013) was established by the EU. They recommend that the Member States manage radon level in workplaces based on this criterion. In the U.S., the standards for workplaces are controlled by the Occupational Safety and Health Administration (OSHA) and the Mine Safety and Health Administration (MSHA). Action on radon in the UK is specified in "Radon in the workplace" published by the Health and Safety Executive (HSE). Conclusions: The Act on Protective Action Guidelines against Radiation in the Natural Environment mainly refers to the management of workplaces that use or handle raw materials but does not have any provisions in terms of protecting naturally exposed workers. In the OSH Act, it is necessary to define whether radon is included in radiation for that reason that its current regulations have limitations in ensuring the safety workers who may be exposed to naturally occurring radon. The management standards are needed for workplaces that do not directly deal with radon but are likely to be exposed to radon. We propose that this could be specified in the regulations for the prevention of health damage caused by radiation, not in Article 125 of the OSH Act.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2017

For more efficient and proactive safety control of imported food, new trend in U.S. is emerging, which assesses the food safety control systems of exporting countries using Systems Recognition Assessment Tool and helps ensure safety of imported foods. This study examines trends in development and application of assessmemnt tool and country assessment reports in U.S. where an active discussion on this issue is in progress. The expert interviews were also conducted. U.S. Systems Recognition Assessment Tool was developed by FDA to recognize the potential value in leveraging the expertise of foreign food safety systems and help ensure safety of imported food. The tool is comprised of ten standards and provides an objective framework for determining the robustness of trading partners' overall food safety systems. Using its own tool, the U.S. FDA conducted a preliminary assessment of the food safety control systems of New Zealand and Canada. According to the U.S.-New Zealand and the U.S.-Canada assessment reports, the overall structure of the systems was similar between the countries. In summarizing the opinions of experts, such a trend in National Food Safety Control System Assessment may be utilized in the sanitary assessment and the control of imported food border inspection frequency before importing food. It would contribute to more effective distribution of national budget and increased public trust. Additionally, international collaboration as well as securing of qualified experts and sufficient budget appear to be crucial to further increase the utility of National Food Safety Control Systems Assessment. In conclusion, firstly, it is critically important for the competent authority of South Korea to proactively respond to international trend in National Food Safety Control System Assessment by identifying the details of its background, assessment purpose, core assessment elements, and assessment procedures. Secondly, it is necessary to identify and complement the weaknesses of Korea's food safety control system by reviewing it with U.S. Systems Recognition Assessment Tool. Thirdly, by adapting the assessment results from imported countries' food safety control systems to the imported food inspection intensity, the resources previously used in inspecting the imported food from accredited countries can be redistributed to inspecting the imported food from unaccredited countries, and it would contribute to more efficient imported food safety control. Fourthly, the competent authority of South Korea should also consider developing its own assessment tool designed to reflect the unique characteristics of its food safety control system and international guidelines.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.432-436
• /
• 2004

The principle and methodology of risk assessment was applied to establish the quality standard of potential impurities of drinking water treatment chemicals. The impurities(arsenic, lead, cadmium, chromium, mercury, etc.) are regulated as the contained quantity of chemicals in Korea while they are regulated as the quality standard with the idea of 10% of the national safety drinking water standard in U.S.A(NSF) and Japan(JWWA). According to risk assessment of the current standard implemented in Korea, the excess cancer risk of arsenic and lead were determined in around $10^{-5}$ and the hazard quotient(HQ) of cadmium and chromium were below $10^{-2}$, respectively. And the standard concentration of the impurities are regulated as much as 2%~6% of the national drinking water quality standard. The values are more enforced rather than the standards in U.S.A(NSF) and Japan(JWWA) regulating the concentration of impurities the 10% of the national drinking water quality standard. We conclude that the impurities standard of drinking water treatment chemicals should be reconsidered comprehensively concerning the national safety drinking water quality standard and risk assessment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.694-701
• /
• 2018

Civil aircraft noise certification standard is based on the ICAO Annex 16 Vol. 1. And, the standard uses A-Weighted SPL, EPNL and SEL method depending on the aircraft category. Korean noise standards, KAS 36 and other nation's CS 36 and FAR 36 noise standards were developed and revised according to the international noise standards, ICAO Annex 16. And, the national noise requirements are equivalent each other. The small airplane noise certification requires only take-off noise level with A-Weighted SPL in dB(A) unit. The first Korean aircraft noise certification was performed for the KC-100 certification in August 2012 with Korean authority and U.S. FAA. The noise certification requires much knowledge and experience in flight tests and noise data processing. In this study, the noise test requirements, test conditions and data correcting methods are shown with the test examples.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.71-80
• /
• 1997

This paper suggests a Map Accuracy Standards by analyzing U.S. National Map Accuracy Standards, by considering korean terrain feature and statistical error theory for paper and digital maps on the scale of 1:50,000. Map accuracy standards require horizontal accuracy to be reported as a circular error with 90% confidence level through Linear Error Probable(LEP) theory and Circular Error Probable(CEP) theory. In order to verify the proposed methodology for positioning accuracy testing, several kinds of test point were selected and tested. These test points were extracted at the centers of roads and bridges, the comers of the independent building, the edges of geographical botany, and the tops of mountains. The positioning accuracy assessment was peformed by comparing the positions of test points in digital maps generated three different sources with those acquired by high accurate GPS surveying. The digital maps were produced from aerial photographs and SPOT satellite image using analytical plotter and 1:50,000 paper map.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.501-509
• /
• 2016

We propose a method to improve the robustness of speaker verification on short test utterances. The accuracy of the state-of-the-art i-vector/probabilistic linear discriminant analysis systems can be degraded when testing utterance durations are short. The proposed method compensates for utterance variations of short test feature vectors using deep neural networks. We design three different types of DNN (Deep Neural Network) structures which are trained with different target output vectors. Each DNN is trained to minimize the discrepancy between the feed-forwarded output of a given short utterance feature and its original long utterance feature. We use short 2-10 s condition of the NIST (National Institute of Standards Technology, U.S.) 2008 SRE (Speaker Recognition Evaluation) corpus to evaluate the method. The experimental results show that the proposed method reduces the minimum detection cost relative to the baseline system.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.5
• /
• pp.51-60
• /
• 2020

The paper examines the characteristics and causes of the expectation gap of audit and assurance services. The paper has conducted three surveys with three target groups. In the first survey, participants are auditors, users of audit reports are subject in the second survey and in the third survey, and students major in auditing are selected. The content of the survey aims to find out the differences in perception of the survey participants on two issues: (i) responsibilities of auditors for detection frauds, errors, protection of the enterprise's assets and financial scandals, and (ii) the role of audit and auditors in making investment decisions and investor's belief. The research carried out survey from March to September 2019 with 165 responds. The collected data was processed by statistical software SPSS, version 23, and Mann-Whitney U test was used to analyze the results of the audit expectation gap between the auditor group and the users of audit report group and between the student group and users of audit report group. The results showed that there exists an expectation gap in the responsibility of auditors for detection of all frauds, errors and protection enterprise's assets. Recommendations include strengthening audit standards, penalizing bad practices and ensuring auditor's independence.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2016

Nowadays, the importance of role of the international standardization keeps increasing substantially. We have already known that international standards have a huge impact on many companies, industries and nations. So far, it has been thought that standardizations are needed after the new products come into the market and are mass-produced in order to encourage the use of the products, systems and services. Standardization will make the products more safe, efficient, and environmentally friendly for the users. However, in these days, a paradigm of the standardization has been changed. International standard becomes a tool for dominating global market and is the most important ingredients of the competitiveness and economic progress of the nation and enterprises. Many countries like Japan, Germany and U.S. use the standardization as an effective method to dominate the market and monopolized the new technologies. Therefore, worldwide competition for the standardization of the new technology become fierce. Korea is leading the technology in semiconductor field. However, activities of international standardization are not sufficient. In order to boost the standardization activities in Korea from industry, academia, and research institute, this paper briefly introduce the international standard organization and some critical issues for next-generation semiconductor memory such as flexible semiconductor, automobile semiconductor and wearable devices.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.5
• /
• pp.635-649
• /
• 2019

Objectives: This literature review seeks to identify the current status of the liberal arts education of dental hygiene majors offered by universities in Korea and the U.S. and provide a comparative analysis of the data on liberal arts education in both countries. Methods: From April 3, 2017 to May 1, 2017, research data on curriculum topics were collected from 60 selected universities. The data were collected from university websites, which also provided the universities' emails and dental hygiene major descriptions. We calculated the descriptive statistics of the variables and performed independent t-tests on the data. Results: In all the domains of the NCS and K-CESA, the dental hygiene major currently offers courses on language and communication and general education, focusing on self-management and development. Few universities offer subjects from other disciplines. Conclusions: Pro-actively exploring strategies is a prerequisite to the systematic operation of standardized dental hygiene education. It is imperative to conduct research consistently on relevant topics, such as teaching methods, general education standards, and connectivity between major subjects and the goals and effects of exposure to a general education.

• Nutrition Research and Practice
• /
• v.1 no.2
• /
• pp.89-93
• /
• 2007

Many countries such as The Republic of Korea have established their own nutritional standards, collectively termed Nutrient Reference Values (NRVs), and they vary due to the science which was reviewed, the purposes for which they are developed, and issues related to nutrition and food policy in the country. The current effort by the Codex Alimentarius Committee on Nutrition and Foods for Special Dietary Uses (CNFSDU) to update the NRVs that were established following the Helsinki Consultation in 1988 represents an opportunity to develop a set of reference values reflecting current scientific information to be used or adapted by many countries. This paper will focus on possible approaches to selecting or developing reference values which would serve the intended purpose for nutrition labeling to the greatest extent possible. Within the United States, the Food and Drug Administration (U.S. FDA) is currently reviewing regulations on nutrition labeling to better address current health issues, and is expected to enter into a process in the next few months to begin to explore how best to update nutrient Daily Values (DVs), most of which are still based on the Recommended Dietary Allowances (RDAs) of the Food and Nutrition Board, U.S. National Academy of Sciences, last reviewed and revised in 1968. In this presentation, I review the current purposes in the U.S. for nutrition labeling as identified in the 1938 Food, Drug, and Cosmetic Act as amended, the scientific basis for current nutrition labeling regulations in the United States, and the recommendations made by the recent Committee on Use of Dietary Reference Intakes in Nutrition Labeling of the Institute of Medicine (2003) regarding how to use the DRIs in developing new DVs to be used on the label in the United States and Canada. Based on these reviews, I then provide examples of the issues that arise in comparing one approach to another. Much of the discussion focuses on the appropriate role of nutrient labeling within the Nutrition Facts panel, one of the three major public nutrition education tools in the United States (along with MyPyramid and Dietary Guidelines for Americans).