• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.404-414
• /
• 2014

This study investigates the dyeability and fastness of jacquard fabric for blind using low-melting flame retardant polyester. Two types of jacquard fabric were prepared with a low-melting flame retardant polyester and regular polyester. The low-melting flame retardant polyester has a sheath and a core. The core consists of flame retardant polyester and the sheath consists of low-melting polyester. Disperse red 50 (DR 50), disperse blue 56 (DB 56), disperse yellow (DY 54) of E-type dyes and disperse 92 (DR 92), disperse blue 60 (DB 60), disperse yellow (DY 79) of S-type dyes were used and dyed on jacquard fabrics dependent of dyeing temperature and time. The fastness, dye exhaustion, color strength (K/S value), and colorimetric properties of jacquard fabrics were evaluated. The dyeability of S-type dyes were higher than E-type dyes. The experiments indicated optimum dyeability that the dyeing temperature was $110^{\circ}C$ for E-type dyes and $120^{\circ}C$ for S-type dyes for 40 minutes. The fastness to washing and light were excellent at a 4-5 grade.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.175-177
• /
• 2022

This paper introduces a system that assists the blind to move to their destination, and compares the performance of 3-types of deep learning network (DNN) used in the system. The system is made up with a smartphone application that finds route from current location to destination using GPS and navigation API and a bus station installation module that recognizes and informs the bus (type and number) being about the board at bus stop using 3-types of DNN and bus information API. To make the module recognize bus number to get on, We adopted faster-RCNN, YOLOv4, YOLOv5s and YOLOv5s showed best performance in accuracy and speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1951-1956
• /
• 2013

Distribution-matching type algorithms based on a set of symbols generated in random order provide a limited performance under biased impulsive noise since the performance criterion for the algorithms has no variables for biased signal. For the immunity against biased impulsive noise, we propose, in this paper, a modified performance criterion and derived related blind algorithms based on augmented filter structures and the distribution-matching method using a set of random symbols. From the simulation results, the proposed algorithm based on the proposed criterion yielded superior convergence performance undisturbed by the strong biased impulsive noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.384-392
• /
• 2012

Recently, much research on blind estimation of the interleaver parameters has been performed by using Gauss-Jordan elimination to find the linearity of the block channel code. When using Gauss-Jordan elimination, the input data to be calculated needs to run as long as the square multiple of the number of the interleaver period. Thus, it has a limit in estimating the interleaver parameters with insufficient input data. In this paper, we introduce and analyze an estimation algorithm which can estimate interleaver parameters by using only 15 percent of the input data length required in the above algorithm. The shorter length of input data to be calculated makes it possible to estimate the interleaver parameters even when limited data is received. In addition, a 80 percent reduction in the number of the interleaver period candidates increases the efficiency of analysis. It is also feasible to estimate both the type and size of the interleaver and the type of channel coding.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.100-105
• /
• 2012

In previous study, to investigate the impression of the compound lighting based on the AC-Model at the full-size room, the impressions of various compound lighting were completed as compared with that of the uniform lightings through the comparison method (a paired comparison) by Semantic Differential scaling. Also, we examined the effect of the supplementary lighting type increasing the lights at the side of the window and the blind-control lighting type, and they were compared with the existing compound lighting type. In results, pared comparison of the compound lighting and the uniform lighting, indicates that the impression of the compound lighting is generally similar to that of the uniform lighting when there are same ratios of the light from the window. Based on these results, we suggest that the AC-Model might be applied to various conditions. And we also introduce the method for daylighting that it is possible to reduce discomfort glare and to improve visual impressions as the supplementary type and blind-control type on the compound lighting. And it was found that electric power consumption of the compound lighting room was lower than that of the uniform lighting room when as same lighting ratio of the compound lighting and the uniform lighting from the window was provided or there was the lighting distribution simulated to same light ratio from the window. Since the method of the ACModel was described in the experimental condition, additional studies should be performed to determine if this model could be applied to different window configurations, lighting layout and types of a room.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.59-66
• /
• 2013

Current Architectural Facade Designs have been trending to increased glass areas resulting in increasing impact on interior lighting and daylighting. In regards to indoor environmental quality, the increase in window space has a large impact on the daylighting received which ultimately impacts the liveability of a space. Especially when considering seasons, in the summer, excessive daylighting can result in glare as well as put an increased load in conditioning the air space further reducing energy efficiency. As a result, in order to improve the sustainability performance of a building, it is important to limit the natural lighting exposure to properly meet the needs and conditions of the building occupants. One of the most representative features to limit excessive sunlight exposure, is to incorporate operable blind systems. To this end, this research has been based on simulations performance through the Radiance Program. Radiance is capable of analyzing performance of daylight and impact of sunlight. Through analysis of different slat angles and blind shapes, impact and minimization of energy usage was evaluated. Furthermore, seasonal analysis was performed in order to understand the effects of seasonal climate factors. Ultimately this research provides an analysis of operable blinds optimization and effects of blind shape, control factors and angle of shading.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.42-52
• /
• 1995

In the evaluation of aging degradation on the structural materials based on the fracture mechanics, the detection and size prediction of defect are very important. Aiming at nondestructive detection and size prediction ol defect with high accuracy and resolution, therefore, an lnduced Current Focusing Potential Drop(ICFPD) technique has been developed. The principle of this technique is to induce a focusing current at an exploratory region by an induction wire flowing an alternating current(AC) that is a constant ampere and frequency. Defects are assessed with the potential drops that are measured the induced current on the surface of metallic material by the potential pick-up pins. In this study, the lCFPD technique was applied for evaluating the location and size of the surface crack and blind crack made in plate specimens, and also for detecting the defects existing in valve, a field component, that were developed by SCC etc. during the service. The results of this present study show that surface crack and blind crack are able to defect with potential drop. these cracks are distinguished with the distribution of potential drop, and the crack depths can be estimated with each normalized potential drop that are parameters estimating the depth of each type crack. In the field component, the defects estimated by experiment result correspond with those in the cutting face of the measuring point within a higher sensitivity.

• YAKHAK HOEJI
• /
• v.52 no.3
• /
• pp.201-211
• /
• 2008

All pharmacists must provide the drug consultation whenever dispense drugs to patients by the Korean Pharmacy Law. Drug consultation is very important procedure for increasing pharmacotherapy. Because it maximizes the therapeutic effects or/and minimizes adverse drug reaction during the drug therapy. However, it is not easy to do because of the dynamic and hectic pharmacy environment. Especially, if someone has a disabling body function, they required more time and efforts to perform consultation by pharmacist. Currently several auxiliary labels for helping drug consultation are using in pharmacy practice but not for disabling patients. Therefore we developed the total 53 auxiliary labels with size of 0.7 cm (width) and 1 cm (length) by Braillewriter letters for blind patients. This research has been performed for total 12 months (Mar. 15ts, 2007$\sim$Feb. 25th, 2008) and the developing methods are consisted of 4 steps: 1) selection of essential informations, 2) simplification of information, 3) changing for Braillewriter letters, 4) application and revising by blindness patients. Also the labels are consisted of 12 for adverse reactions and precautions, 8 for directions, 2 for storages, 9 for duration, 9 for dosage forms, and 12 for common names. After developed those labels, we revised those labels by discussion with 2 blind people. In conclusion, the new auxiliary labels for blind patients can increase therapeutic effects and decrease risks from pharmacotherapy besides decreasing of pharmacist's work load in the future.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.545-552
• /
• 2008

Purpose: The transaxillary approach for breast augmentation has been advocated for patients and surgeons for several decades. However, this blind technique had many disadvantages including, traumatic dissection, difficult hemostasis, displacement of implants, and ill-defined asymmetrical location of inframammary crease. In the present study, the precise endoscopic electrocautery dissection was applied to eliminate the limits of blunt dissection throughout the procedures. Methods: From December 2006 to December 2007, a total of 103 patients with an average age of 29.5 years underwent endoscopic assisted transaxillary dual plane augmentation mammoplasty. The mean implant size was 243 cc with the range between 150 and 350 cc. Through a 4 cm axillary incision, electrocautery dissection for submuscular pockets was carried out under the endoscopic control. The costal origin of pectoralis muscle was completely divided to expose subcutaneous tissue and to make type I dual plane. Results: Using the endoscopic dissection, we achieved good aesthetic results including a short recovery period, less morbidity, and symmetrical well-defined inframammary crease. Type I dual plane procedure could support the consistent inframammary fold shape and be applied to most patients without breast ptosis. Minor complications did not occur, however, four major complications of capsular contracture occurred. Conclusion: In contrast to the era of the blind techniques, endoscopic assisted transaxillary dual plane breast augmentation can now be performed effectively and reproducibly. With Its advantage, the axillary application of endoscopy for augmentation mammaplasty is useful to achieve the optimal cosmetic outcomes.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.1
• /
• pp.89-95
• /
• 2013

A DBLP(Double blind light pipe) daylight system can be installed at a building exterior wall or roof to replace artificial light during the day time. This system was consisted of a double blind light collector, a mirror duct type light transformer and a prism light pipe distributor. The double blinds were used to track the sun's altitude and azimuth movements to collect the sunlight throughout the day. The sunlight collected by the light collector was reflected on the first mirror and the second mirror and sent to the light pipe through the light transformer. The transformer was designed to deliver the sunlight into the light pipe efficiently. The light distributor plays a role in diffusing the sunlight coming in through the light collector to be used for indoor lighting. In this paper, a DBLP system has been designed, installed and tested at a KIER daylighting twin test cell. The DBLP daylighting system was applied to the experimental test cell which has an indoor area of 2.0 m wide ${\times}$ 2.4 m height ${\times}$ 3.8 m length. The experiment was conducted from January 30 to February 27, 2012, under clear skies and partially cloudy skies. Data was collected from 10:00 am to 16:00 pm every 2 minute and the average was calculated for every 30 minute of the data collection to obtain the system efficiency. The results indicated that the DBLP system efficiency was evaluated as 11.67%. The DBLP system indoor illumination energy reduction was predicted as 0.822 kWh/day. This could replace 4 sets of a 32W fluorescent lamp operating 6.4 hours per a day.