• Journal of the Korean Home Economics Association
• /
• v.43 no.10 s.212
• /
• pp.179-190
• /
• 2005

The purpose of this study was to apply the three dimensional Replica method to the fabrication of dress forms of plus-sized women to attain proper ease through draping and based on the ease to develop good torso patterns with superior fit. The results were as follows. The physical characteristics of the dress forms of plus-sized women were divided into two: Types I and 11. The proper ease was calculated through draping using dummies of each somatotype and appropriate torso patterns were developed. The differences of the types for each pattern were as follows. The bust girth ease of Type II was 6cm as for Type I. As for the bust breadth 1.0cm was added to the anterior chest width, the armpit width was the actual measurement plus 0.5cm, and the back breadth was the posterior chest width plus 2.5cm. The bust breadth was smaller and the back breadth was bigger that those of Type I after improving the bust and back fit. The bust of Type I protrudes outwards relatively and so the shoulder dart of front-side of Type I was 1.2cm bigger than that of Type II which improved the bust region fit. Considering the characteristics of the protruding abdominal region the front- side waistline of type II was assigned W/4+3.5cm and the back-side waistline W/4cm, so that the sidelines divided the front and back properly. It was drafted so that the center-front became diagonal, thereby improving the middle-hip girth fit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.297-307
• /
• 1991

The purpose of this study was to investigate the effect of physical type and age on preference for color and fabric motifs in women's clothing design. Color preference measures consisted of fabric samples in solid colors and drawings of clothing styles painted in colors. Preference for fabric motifs was assessed by printed fabrics in various patterns and sizes. All of the preference measures were devised specifically for this study. Furthermore, items on height and weight for physical type as well as age of the subjects were included in the questionnaire. Data were obtained by means of structured interviews and self-administered questionnaires from 588 women ($20\~60$ years of age) in seoul. Analysis was by chi-square ($X^{2}$), frequency, percentage, and mean. On color preference, a small but significant body type, height, and age effect was found on some types of clothing. Preference for fabric motifs was affected by body type; height of subjects was related to preference for size of motifs, and age was related to choice, size, and width of striped motifs. It was concluded that body type, height, and age are 1e3st effective in predicting color preference. Fabric motif preference was influenced more by age than by body type or height. Generally, there was some similarities in preference for lines and fabric patterns among slim body types, tall figures, and younger age groups as well as heavy body types, short figures, and older age groups.

• Applied Microscopy
• /
• v.26 no.3
• /
• pp.305-313
• /
• 1996

Acinous gland cells (A, B, C, D and E-type cells) and duct cell (G-type cell) are observed in acinus and in duct of salivary gland of Korean Slug respectively by electron microscope. The type-A gland cells are numerous and are packed with medium electron dense granules (diameter, $3{\mu}m$) in cytoplasm. The circular shaped nucleolus and evenly developed chromatins are observed in the nucleus of type-B cell, and cytoplasm includes medium electron dense granules (diameter, $2.5X3.7{\mu}m$). The type-C gland cell has a round nucleus, and thin elongated-shaped heterochromatins are evenly distributed in the nucleoplasm and many net shaped endoplasmic reticulums and oval serous granules of middle electron density (diameter, $3.5X5{\mu}m$) fill the cytoplasm. The type-D gland cell is the largest and the most numerous of the gland cells consisting the salivary gland and heterochromatins in nucleus are well developed in the nucleoplasm. Most of granules (diameter, $0.8X2.5{\mu}m$) in cytoplasm are round, and look dark for the high electron density, and cytoplasm is filled with net-shaped endoplasmic reticulums. The type-E gland cells are rarely existent around the salivary gland, and the granules of those cells are irregular in shape and size and are vacuolized in cytoplasm. Intralobular salivary duct is composed of the high electron dense squamus endotheliums, while the other interlobular salivary duct is filled with irregular columnar epitheliums. The interlobular duct cell contains the high electron dense granules (size, $0.3{\sim}1.5{\mu}m$) in cytoplasm and those granules are secreted into cilia of salivary lumen.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.169-176
• /
• 2014

This research discusses the characteristics and the implementation strategies for two types of quality metrics to analyze innovation effects in six sigma projects: fixed specification type and moving specification type. $Z_{st}$, $P_{pk}$ are quality metrics of fixed specification type that are influenced by predetermined specification. In contrast, the quality metrics of moving specification type such as Strictly Standardized Mean Difference(SSMD), Z-Score, F-Statistic and t-Statistic are independent from predetermined specification. $Z_{st}$ sigma level obtains defective rates of Parts Per Million(PPM) and Defects Per Million Opportunities(DPMO). However, the defective rates between different industrial sectors are incomparable due to their own technological inherence. In order to explore relative method to compare defective rates between different industrial sectors, the ratio of specification and natural tolerance called, $P_{pk}$, is used. The drawback of this $P_{pk}$ metric is that it is highly dependent on the specification. The metrics of F-Statistic and t-Statistic identify innovation effect by comparing before-and-after of accuracy and precision. These statistics are not affected by specification, but affected by type of statistical distribution models and sample size. Hence, statistical significance determined by above two statistics cannot give a same conclusion as practical significance. In conclusion, SSMD and Z-Score are the best quality metrics that are uninfluenced by fixed specification, theoretical distribution model and arbitrary sample size. Those metrics also identify the innovation effects for before-and-after of accuracy and precision. It is beneficial to use SSMD and Z-Score methods along with popular methods of $Z_{st}$ sigma level and $P_{pk}$ that are commonly employed in six sigma projects. The case studies from national six sigma contest from 2011 to 2012 are proposed and analyzed to provide the guidelines for the usage of quality metrics for quality practitioners.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.307-311
• /
• 2019

The ejector type microbubble generator, which is the method to supply air to water by using cavitation in the nozzle, does not require any air supplier so it is an effective and economical. Also, the distribution of the size of bubbles is diverse. Especially, the size of bubbles is smaller than the bubbles from a conventional air diffuser and bigger than the bubbles from a pressurized dissolution type microbubble generator so it could be applied to the aeration tank for wastewater treatment. However, the performance of the ejector type microbubble generator was affected by hydraulic pressure and MLSS(Mixed Liquor Suspended Solid) concentration so many factors should be considered to apply the generator to aeration tank. Therefore, this study was performed to verify effects of hydraulic pressure and MLSS concentration on oxygen transfer of the ejector type microbubble generator. In the tests, the quantity of sucked air in the nozzle, dissolved oxygen(DO) concentration, oxygen uptake rate(OUR), oxygen transfer coefficient were measured and calculated by using experimental results. In case of the MLSS, the experiments were performed in the condition of MLSS concentration of 0, 2,000, 4,000, 8,000 mg/L. The hydraulic pressure was considered up to $2.0mH_2O$. In the results of experiments, oxygen transfer coefficient was decreased with the increase of MLSS concentration and hydraulic pressure due to the increased viscosity and density of wastewater and decreased air flow rate. Also, by using statistical analysis, when the ejector type microbubble generator was used to supply air to wasterwater, the model equation of DO concentration was suggested to predict DO concentration in wastewater.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.397-406
• /
• 2012

During the 2nd Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) in 2010, gas-hydrate-bearing sediment cores were recovered at 10 drill sites. Base, on Infrared (IR) thermal image and grain-size analysis of the cores, three distinct types of gas hydrate are classified: Type I (fracture-filling in mud layers), Type II (disseminated in mud layers), and Type III (pore-filling in sand layers). Types I and II gas hydrates occur in mud as discrete veins, nodules or disseminated particles. Type III fills the pore spaces of the sand layers encased in mud layers. In this case, the sand content of hosting sediments shows a general linear relationship with gas hydrate saturation. The degrees of temperature anomalies (${\Delta}T$) from IR images generally increase with gas hydrate saturation regardless of gas hydrate occurrence types. Type I is dominantly found in the sites where seismic profiles delineate chimney structures, whereas Type II where the drill cores are composed almost of mud layers. Type III was mainly recovered from the sites where hemipelagic muds are frequently intercalated with turbidite sand layers. Our results indicate that gas hydrate occurrence is closely related to sedimentological characteristic of gas hydrate-bearing sediments, that is, grain size distribution.

• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.319-324
• /
• 2018

Due to climate change, water shortages and water-related disasters will be serious. Since the damage and frequency of drought are increasing, the importance of water resource management technology is increasing. In this study, we analyzed the amount of greenhouse gas and the environmental impact caused by the production and operation system technologies of movable weir among various water resource management technologies. The research subjects were air inflatable rubber dams widely used in rivers and upright type rubber dams, which are an improvement on the existing rubber type. Each type of dam was studied at sizes of $1,500H{\times}10,000L\;mm$ and $3,000H{\times}20,000L\;mm$, and the two types and two sizes were compared and analyzed. Using life cycle assessment, we examined the environmental impacts using the amount of electricity required for operation and the discretionary amount required for production. In the '$1,500H{\times}10,000L$' dams, the global warming indexes were $9.35E+04kg\;CO_2-eq$. for upright type and $7.36E+04kg\;CO_2-eq$. for inflatable type. At size of '$3,000H{\times}20,000L$' the global warming indexes were $9.09E+05kg\;CO_2-eq$. for upright type and $1.07E+06kg\;CO_2-eq$. for inflatable type. Analysis of the life cycle environmental impact showed that the environmental impact of the air inflatable rubber dam was reduced by 39.8% at '$1,500H{\times}10,000L$' compared to the larger size. At the larger '$3,000H{\times}20,000L$' size, the upright dam showed a 10.1% smaller impact than the air inflatable rubber dam. Selection of water resource management system should consider climate change, not only management purpose and cost. Additional studies and improvements on rubber dam systems should be made.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.259-271
• /
• 2022

Lattice preferred orientation (LPO), which shows a specific lattice-orientation of minerals, is affected by the deformation conditions of minerals. Because of this reason, LPO is very useful to study the deformation conditions of the minerals and the rocks. In this study, we collected amphibole-rich rocks from the Geumgye Mountain, Chugye-ri, Yugu-eup, Chungcheongnamdo, located in the southwestern part of the Gyeonggi Massif, and analyzed the LPO of amphibole and plagioclase using electron backscattered diffraction. Two types of LPOs of amphibole, type I and type IV, were observed in Yugu amphibole-rich rocks. Our data suggest that the amphibole-rich rocks in Yugu were deformed by rigid body rotation regardless of the LPOs and grain size of amphibole, and the LPOs are considered to have been affected by the degree of deformation (i.e. strain). In the low strained amphibole-rich rock, a strong type I LPO and a large grain size of amphibole were observed. On the other hand, in the highly strained amphibole-rich rocks, a weak type IV LPO and a small grain size of amphibole were observed. The various degree of deformation observed in the Yugu amphibole-rich rocks were also observed in the adjacent peridotites, indicating that the rocks in Yugu experienced various levels of deformation.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.49-53
• /
• 2021

The objective of this study was to understand which type of fire hose should be placed in indoor fireplug box upon analyzing the preparation time between rack-type fire hose and reel-type one. With respect to the type of hose, rack-type stacking method was used and hose preparation time was measured with 5 times of repeat test, separating men and women. Study results reveal that preparation time of reel-type fire hose took longer than that of rack-type one in both men and women. For both rack-type hose and reel-type hose, preparation time by two persons took shorter than that by one man. Also, preparation time by three persons took shorted than that by two women. Preparation time for both rack-type hose and reel-type one by men took shorter than that by women. In summary, it was confirmed that rack-type hose could be prepared within shorter time than reel-type one. Since the size of drum set in the reel-type fire hose is relatively small, it had some difficulty in preparation of fire hose timely.