• Journal of The Korean Astronomical Society
• /
• v.19 no.2
• /
• pp.69-89
• /
• 1986

The global morphology and geometric parameters of 39 barred galaxies are investigated, by using isophote map and isodensity tracings obtained from detailed surface photometry with the Kiso V-band plates. The observed results are as follows: i) There is no strong indication that the ratio of bar length to disk size is correlated with Hubble type, except that the largest bars appear in the SBb galaxies. ii) The mean value of axial ratios of bars is $2.0{\pm}0.4$ and there is a trend that early type galaxies have smaller axial ratios than late type galaxies. iii) About 15% of early type barred galaxies(Sb0-SBb) have triaxial bulges.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.17-23
• /
• 2004

At the conclusion from the hypothesis testing, there is a possibility of making Type I error and Type II error. The purpose of this article is to use this program in statistics teaching through developing the program for studying on the concept about these two errors, two kinds of the probability of errors by the variation of rejection region, two kinds of the probability of errors by the variation of sample size, the relations of the probability $\alpha$ and $\beta$ by these two errors, and power function, power curve.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.17-21
• /
• 1972

There are two kinds of tile dial Keyserider which is used in recently, one is a electromechanical relay type, the other is a mechanical type. It is, however, that above types are very high cost to manufacture. therefore it is desinged a new type by using the transistor switching circuit so that it is small size and can be manufactured lower cost than other types.

• Journal of Advanced Marine Engineering and Technology
• /
• v.9 no.4
• /
• pp.339-347
• /
• 1985

Precise measurement of flowrate is considered as an important measuring factor in mechanical and chemical experiment. Although there are many methods to measure flowrate, Float type flowmeter is widely used because of its easy attachment to piping and high measuring precision. To design the precise float type flowmeter, much design information such as tapered-tube dimensions, float size, float shape and float material is required. In this paper, fundamental design theory for float type flowmeter according to the given flowrate range is suggested and compensation coefficients of volumetric and weight flowrate for water, R-113 and air are calculated.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.1
• /
• pp.19-30
• /
• 2006

The purpose of this article is to develop a program for teaching Type I and Type II errors in one sample. In this program, the concepts of two errors are visually explained, and the probabilities of two errors are also visually displayed as the rejection region changes or the sample size changes. Also, in this program, the power curve and the operating characteristic curve are visually displayed in terms of the parameter value of interest.

• Journal of Aquaculture
• /
• v.11 no.4
• /
• pp.565-572
• /
• 1998

Survival rate of larval red spotted grouper, Epinephelus akaara is very low, because mouth size of the larvae is too small to eat normal sizes of rotifers. In order to enhance larval survival, optimal culture conditions for larvae using different live foods and water temperatures were studied. Bigger live food produced larger size of rotifer, when the rotifer was cultured with three different live foods such as Tetraselmis tetrathele, marine Chlorella and Nannochloris oculata. Also, the size of rotifer produced was temperature-dependent showing that higher water temperature induced smaller rotifer. Survial rate of the larvae increased with the increase of water temperature up to $29{\circ}C$. Also, higher larval survials were found at the food density of 15 to 20 individuals per milliliter. The larvae fed L-type or small individuals of L-type rotifer died all within a week, although the larvae fed S-type or small individuals of S-type one survived successfully during this period. The size of small individuals of S-type rotifer collected through fine net became larger in a few hours within larval culture tank. Survival rate of grouper larvae with initial stocking density of 40 thousands in 6-ton concrete tank was 6.3% in 10 days and 0.2% in 53 days after hatching, respectively. Total length of the larvae reached around 29.5 mm in 53days after hatching.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.91-96
• /
• 2021

The enhancement of thermoelectric figure of merit was achieved by the simple processes of sieving and high energy ball milling, respectively, which are enable to reduce the grain size of n-type Bi₂Te₃ thermoelectric materials. By optimizing the grain size, the electrical conductivities and thermal conductivities were controlled. In this study, spark plasma sintering was employed for hindering the grain growth during the sintering process. The thermoelectric figure of merit was measured to be 0.78 in the samples with 30 min high energy ball milling process. Notably, this value was 40 % higher than that of pristine Bi₂Te₃ sample. This result shows the properties of thermoelectric materials can be readily controlled by optimization of grain size via simple ball milling process.

• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.145-159
• /
• 2003

The purpose of this study was to classify body type for ready-to-wear sizes. The subjects were 300 women ages of 18-24. they were measured direct anthropometry. The body types for sizing system were divided by Rohrer Index. KS drop value and ISO drop value. The results of this study were as follows. 1. By adapting the Rohrer Index. we classify 3 types from anthropometric measurements. The thin type covered 39.3%, the standard type 51.0% and the obesity type 18.7%. The characteristics of clusters were as follows. Thin type was characterized by tall. slender type and slim. The standard type was characterized by middle sized. The obesity type was characterized by short. fat type. and large bust. 2. By adapting the KS system drop value. we classify 3 types from anthropometric measurements. The H type(drop 0) covered 25.6%. the N type(drop 6) 65.2% and the A type(drop 12) 9.2%. Type H was slightly tall large bust. and curved from waist to hip. Type A was slightly thin. large hip and smaller bust than type N. Principal factor components were bust size. The height could be divided into three groups. The Petite(l50cm) covered 5.5%. the Regular(l60cm) 64.7% and the Tall(l70cm) 29.8%. Through the crosstab of height and body type. we extracted regular height by N type 46.2% the largest cell. The body type was the higher order of N type. H type and A type. The tall was the higher order of Regular. Tall and Petite. 3. By adapting the ISO system drop value. we classify 3 types from anthropometric measurements. The H type(drop 0) covered 15.0%. the M type(drop 6) 41.0% and the A type(drop 12) 44.0%. Type H was slightly short. slightly fat and large bust. Type A was slightly tall. slight thin than type M. The height could be divided into three groups. We adjust the height section after allow for height distribution. The Short(152cm) covered 12.8%. the Regular(160cm) 66.9% and the Long(168cm) 20.3%. Through the crosstab of height and body type, we extracted regular height by M type 29.3% the largest cell. The body type was the higher order of M type, A type and H type. The tall was the higher order of Regular, Long and short.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.111-119
• /
• 2014

A novel pulsed laser ablation process in liquid was investigated to prepare scheelite-type ceramic [calcium tungstate ($CaWO_4$) and calcium molybdate ($CaMoO_4$)] nanocolloidal particles. The crystalline phase, particle morphology, particle size distribution, absorbance and optical band-gap were investigated. Stable colloidal suspensions consisting of well-dispersed $CaWO_4$ and $CaMoO_4$ nanoparticles with narrow size distribution could be obtained without any surfactant. Particle tracking analysis using optical microscope combined with image analysis was applied for a fast determination of particle size distribution in the prepared nanocolloidal suspensions. The mean nanoparticle size of $CaWO_4$ and $CaMoO_4$ colloidal nanoparticles were 16 nm and 30 nm, with the standard deviations of 2.1 and 5.2 nm, respectively. The optical absorption edges showed blue-shifted values about 60~70 nm than those of reported in bulk crystals. And also, the estimated optical energy band-gaps of $CaWO_4$ and $CaMoO_4$ colloidal particles were 5.2 and 4.7 eV. The observed band-gap widening and blue-shift of the optical absorbance could be ascribed to the quantum confinement effect due to the very small size of the $CaWO_4$ and $CaMoO_4$ nanocolloidal particles prepared by pulsed laser ablation in liquid.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.168-178
• /
• 2002

This study is aimed at investigating and comparing the differences in the uniform of nurses according to regions and hospital size in Korea. This study takes two large regions as its survey area; one is Seoul, Incheon and Gyeonggi Province, and the other is Daejon and Chungcheong Province. The hospital size is divided into general hospitals and neighborhood hospitals. The survey was conducted among the nurses working in 12 randomly-selected hospitals and its statistical results are analysed firm 818 respondents'questionnaires. The results are divided into 3 categories as follows; 1) Results of analysis of survey on the uniform of nurses : Nurses usually wear two-piece suits and more than half of the hospitals choose a white-color pattern. And the nurse's uniform with color varying according to their position and ward is considered to be desirable; 2) Analysis on regional differences : In the case of Daejon and Chungcheong Province, there is a relatively high ratio of respondents who answered questions with 'high percentage of young nurses', 'position differentiation by means of different design and fabric according to ward'. In case of Seoul, Incheon and Gyeonggi Province, questions with 'use of a patterned textile in nurses'uniform', 'ready-made size system'are higher; 3) Analysis of the differences in accordance with hospital size : In the case of general hospitals, there is relatively a high ratio of respondents who answered questions with 'use of different design and fabric according to a nurse's position', 'use of patterns in nurses'uniform'. In the case of neighborhood hospitals, there is a high ratio of respondents with'use of classical one-piece or two-piece type wear', 'ready-made type size system', 'obligatory use off nurse's cap'.