• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.445-448
• /
• 2006

In order to control the temperature crack of massive dam concrete, the selection of appropriate materials like binder, aggregates etc., is essential. To select the optimal mix proportion, ordinary portland cement(Type I) plus 25% of fly ash and low heat portland cement(Type IV) are used as binder, and 80mm of coarse aggregates are used to reduce the amount of binder and compare the compressive strength, hydration temperature and crack index. The results of this study are as following. 1. The strength of Type IV cement is advantageous on the long-term age. 2. According to the temperature measured on mock-up$(1.5m{\times}1.5m{\times}1.5m)$, and realized the thermal analysis, the Type IV cement carried out advantageous to control the thermal crack.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.919-933
• /
• 2017

A series of Brazilian tests under diameter compression for disc specimens was carried out to investigate the strength and failure behavior by using acoustic emission (AE) and photography monitoring technique. On the basis of experimental results, load-displacement curves, AE counts, real-time crack evolution process, failure modes and strength property of granite specimens containing two pre-existing holes were analyzed in detail. Two typical types of load-displacement curves are identified, i.e., sudden instability (type I) and progressive failure (type II). In accordance with the two types of load-displacement curves, the AE events also have different responses. The present experiments on disc specimens containing two pre-existing holes under Brazilian test reveal four distinct failure modes, including diametrical splitting failure mode (mode I), one crack coalescence failure mode (mode II), two crack coalescences failure mode (mode III) and no crack coalescence failure mode (mode IV). Compared with intact granite specimen, the disc specimen containing two holes fails with lower strength, which is closely related to the bridge angle. The failure strength of pre-holed specimen first decreases and then increases with the bridge angle. Finally, a preliminary interpretation was proposed to explain the strength evolution law of granite specimen containing two holes based on the microscopic observation of fracture plane.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.74-83
• /
• 2020

A number of so-called 'Type IV' cracking was reported to occur at the welded joints of the P91 steel or P92 steel reheat steam piping systems in Korean supercritical thermal power plants. The reheat steam piping systems are subjected to severe thermal and pressure loading conditions of coolant higher than 570℃ and 4MPa, respectively. In this study, piping analyses and design evaluations were conducted for the piping system of a specific thermal plant in Korea and suggestions were made how structural integrity could be improved so that type IV cracks at the welded joints could be prevented. Integrity evaluations were conducted as per ASME B31.1 code with implicit consideration of creep effects which was used in original design of the piping system and as per nuclear-grade RCC-MRx code with explicit consideration of creep effects. Comparisons were made between the evaluation results from the two design rules. Another approach with modification or reduction of the redundant supports in the piping systems was investigated as a tool to mitigate thermal stresses which should essentially contribute to prevention of Type IV cracking without major modification of the existing piping systems. In addition, a post weld heat treatment method and repair weld method which could improve integrity of the welded joint of P91 steel were investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1175-1180
• /
• 2000

Recently, the crack of concrete induced by the heat of hydration of cement is a serious problem for more greater, special and higher strength of concrete structures. The increasing concrete's temperature is mainly caused by the heat of hydration of cement and so, to control the thermal stress of concrete structure is desirable to use low heater material of hydration. There are many methods to diminish the increasing of concrete temperature such as using of low heat cement, addition of fly-ash, application of pre-cooling, etc., and in this study, we evaluate the heating and mechanical properties of ultra low heat mass concrete using Low Heat Portland(KS Type IV) cement with 30% of limestone powder. The results of this study will be applied to side wall and bottom of No. 15 and 16 of underground LNG tank in Inchon.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1437-1443
• /
• 2010

지하철 구조물은 수화열에 의해 균열이 발생하기 쉬우며, 균열을 최소화하기 위해 시공방법(순차/건너 뛰기 시공 등)의 개선 등 많은 노력을 하고 있으나 아직 이에 대한 상관성을 분석한 바가 없다, 이 논문에서는 시공길이(6m, 9m, 18m), 벽체높이(2m, 3m, 4m,), 콘크리트 배합(1종+FA20%, 4종+FA10%, 3성분계), 콘크리트 타설시기(봄/가을, 여름, 겨울) 및 시공방법(순차시공, 건너띠기시공) 등 14개 항목을 각각 조합하여 온도균열지수를 산출(378개)하여, 통계착적 처리를 통해 상관성을 분석하였다. 또한 ”온도균열지수표“를 작성하여 현장의 콘크리트 타설 여건의 변화에 대응하여 쉽게 활용할 수 있도록 하였다. 또한, 콘크리트 타설을 순차적으로 시행하는 경우와 건너 띄어 시행하는 경우에 대해서도 그의 상관성을 분석하여 급속 시공 방안을 검토하였다.

• 한국건설순환자원학회논문집
• /
• 제4권1호
• /
• pp.81-88
• /
• 2009

본 연구에서는 습식방식 생산시스템의 품질의 대폭적인 향상이 가능한 건설폐기물 재활용을 위한 이물질 분리 선별 장치인 샌드플럭스(Sand Flux)를 개발하기 위한 연구의 일환으로써, 샌드플럭스 장치에서 생산된 순환모래의 기초물성을 평가하고 모르타르의 공학적 특성을 실험 실증적으로 검토함으로써, 본 연구 장치의 성능을 검증하고 하였으며, 본 연구의 기초물성 실험결과, 절건밀도의 경우, RS-II($2.25g/cm^3$)~RS-VI($2.37g/cm^3$), 흡수율의 경우, RS-II(6.46%)~RS-VI(4.36%)의 경향을 나타내어 샌드플럭스 장치를 거친 순환모래가 소폭의 개선효과를 보이고 있어 본 연구의 목표성능(KS F 2573)에는 대부분 만족하였지만 구조체용 콘크리트용 잔골재의 품질 기준에는 만족하지 못하였다. 또한, 0.08mm체 통과량의 경우, RS-II(7.34%)~RS-VI(0.86%), 점토덩어리량의 경우, RS-II(19.49%)~RS-VI(0.87%), 유기이물질 함유량의 경우, RS-II(1.24%)~RS-VI(0.09%) 등으로 품질성능이 크게 개선되는 경향을 나타내어 본 연구에서 설정한 목표 품질수준 만족하여 본 연구 샌드플럭스 장치의 우수성을 확인할 수 있었다. 한편, 모르타르 품질실험 결과, 샌드플럭스(Sand Flux) 장치를 거친 최종 생산된 순환모래 RS-VI를 사용한 RS-II를 사용한 모르타르 보다 플로우 및 압축강도가 다소 증가되는 경향을 보였으며, 수축특성 또한 샌드플럭스 장치를 거쳐 최종 생산된 순환모래 RS-IV를 사용한 모르타르의 균열발생량이 현저히 감소되는 성상을 나타내었다.