• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.99-105
• /
• 2014

This paper presents a comparison of operating characteristics for industrial water cooler with variation control methods. The performance analysis regarding the characteristics of condensation capacity, evaporation capacity, compressor load, COP of an on-off type cooler, a hot gas-bypass control type cooler and an inverter control type cooler with respect to the system load is reviewed, respectively. The primary results are as following: the variation of required compressor load of an on-off type cooler with respect to load is 5%, that of hot gas-bypass type is 18% and 66% for an inverter control type cooler. As the result shows, an inverter control type yields relatively huge difference of required compressor load compared to other types of control system. In terms of partial load, COP of an inverter control type cooler presents the highest value, and is considered as the optimized type for the used of the system involving frequent partial load.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.363-369
• /
• 2005

we compared the operating characteristics between flux-lock type and resistive type superconducting fault current limiters(SFCLs). Flux-lock type SFCL consists of two coils, which are wound in parallel each other through an iron core, and a high-Tc superconducting(HTSC) element is connected with coil 2 in series. The the flux-lock type SFCL can be divided into the subtractive polarity winding and the additive polarity winding operations according to the winding directions between the coil 1 and coil 2. It was confirmed from experiments that flux-lock type SFCL could improve both the quench characteristics and the transport capacity compared to the resistive type SFCL, which means, the independent operation of HTSC element.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.427-436
• /
• 2015

Objective: This study aims to analyze occupational accidents of parking lot attendants by parking lot type. Background: Recently, efforts are made to analyze accident characteristics by occupation type targeting the workers engaged in the same work. Method: This study analyzes 303 occupational accidents of parking lot attendants occurring from 2010 to 2012. Parking lots are grouped into two groups according to the work environment. One is public/ground type which comprises road side or open area parking lots and the other is building/mechanical type which comprises a multi-story parking building with connecting ramps and/or mechanical parking system. The characteristics of occupational accidents by parking lot type are analyzed. Results: Accident characteristics showed the difference between public/ground type and building/mechanical type on the size of enterprise, age, gender and work experience of the injured. Also the accident type, source of accident and parts of body affected are different between the two parking lot types. Conclusion and Application: The findings of accident characteristics according to parking lot types can be used as baseline data for establishing systemized preventative policies for occupational accidents of parking lot attendants.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.14-18
• /
• 2012

Two kinds of piezoelectric actuator are applied to the valve for controlling the direction, the flow and the pressure of the fluid. One is a stack type piezoelectric actuator which has very fast response characteristics but very tiny displacement. The other is a bender type piezoelectric actuator which has also fast response characteristics but lower than the stack type one, and has longer displacement than the stack type one. So, the bender type piezoelectric actuator has advantage to apply to the valve for controlling a large amount of flow and fast on-off operating. In this study, the bender type piezoelectric pneumatic valve for color sorter is designed and fabricated. The new type high speed piezo valve with the both side supporting mechanism for high operating frequency and high reliability is discussed for separating the foreign body from the grains. Finally, the performance characteristics of a fabricated valve are analyzed and the frequency characteristics are also discussed for substituting the conventional type solenoid actuator.

• Journal of Society of Preventive Korean Medicine
• /
• v.23 no.3
• /
• pp.71-82
• /
• 2019

Objectives : To determine the relationship between Type A Behavior Pattern and lifestyle and psychological characteristics of Korean medical students. Methods : The Type A Behavior Pattern in 73 Korean medical students was measured. Questionnaires were conducted on lifestyle and mental characteristics. Results : In the PSQI, ISI, S-Scale, BEPSI-K, PWI-SF, CES-D, BDI, STAI-X-1, STAI-X-2, K-RTA, PWI-SF and PSS surveys, The score of Type A Behavior Pattern was significantly higher than that of Type B Behavior Pattern. Otherwise, in SES, WHOQOL-BREF(Physical, Psychological) and SWLS surveys, The score of Type A Behavior Pattern was significantly lower than that of Type B Behavior Pattern. Conclusions : Lifestyle and psychological characteristics of Korean medical students are correlated with Type A Behavior Pattern. Therefore, Type A Behavior Pattern could be used an indicator reflecting various properties of Korean medical students.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.37-45
• /
• 2012

Byeolseo was located in various places with beautiful natural scenery to avoid the mundane world and for country life in seclusion. In this study, to classify locational type and characteristics of Byeolseo in Gyeongsangnamdo and Jeollado areas, complex locational types and characteristics of total 96 Byeolseo (52 in Gyeongsangnamdo and 44 in Jeollado) were researched and cluster analysis was executed to group locational characteristics to several clusters with similar characteristics in order to classify locational types of Byeolseo. As the result, locational type for Gyeongangnam-do and Jeolla-do were classified to 5 types each. Unique locational types Gyeongsangnamdo were 'valley type' and 'cliff type' and unique ones for Jeollado were 'flatland type' and 'riverside.hill type'. 'Hill type', 'curvy river type' and 'riverside other type' were shown in both areas. In Gyeongangnamdo, 30.8% was cliff type and 15.4% was valley type 46.2% of the total was locatedon 'cliff near river' or 'valley'. These were the most popular locational characteristics of Gyeongangnamdo. Unlike Gyeongangnamdo, 18.2% was flatland type, 18.2% is riverside.hill type, and 39.6% was hill type in Jeollado 75.0% of the total was locatedon 'flatland', 'on hill near river' or 'on hils'. These were the most popular locational characteristics of Jeollado. Such locational characteristics showed that Byeolseo was located using nearby scenery considering topographic characteristics of the located area.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.894-905
• /
• 2015

The present study analyzed data from the 3D measurement of the feet of men aged over 20 years residing in the capital region as part of the 6th Anthropometry of Size Korea. To analyze the characteristics of the foot shapes of young men aged 20~39 years and middle-aged/elderly men aged 40~69 years by age and by type, a cluster analysis was conducted using the factors derived through the factor analysis as independent variables. The results of the study that analyzed the characteristics of foot shapes by type according to differences in age were as follows. First, through the analysis of the characteristics of the foot shapes of young men by type, five factors were extracted, and the foot shapes were classified into three types: Type 1 (short and flat), Type 2 (thick), and Type 3 (long and wide). Second, through the analysis of the characteristics of the foot shapes of middle-aged/elderly men by type, six factors were extracted, and the foot shapes were classified into four types: Type 1 (short and regular), Type 2 (flat), Type 3 (thick), and Type 4 (long and regular). The results of the present study are expected to serve as basic data for the design of shoes by age and foot type.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1215-1225
• /
• 2003

The purpose of this research was to investigate the characteristics of urban ecotopes and to classify ecotopes systematically from them. Total of 15 characteristics for classification of ecotopes were selected, and there were categorized 3 factors, that is abiotic, biotic and anthropological factors. The ecotope types in the study area were classified into 67. The classification of ecotope was made with SPSS for Windows Version 10.0 on the basis of the 15 characteristics. As the results of cluster analysis using the average linkage method between groups, groups of ecotope type were divided into 15 clusters. It was known that there was not a great difference in an affinity as the result of overlapping the maps of ecotope type and land use type. This research suggested characteristics for classification of ecotopes, but there was a limit to Set the objective method for grade classification because of lacking in the basic data, the research of characteristics will be accomplished continuously.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.135-142
• /
• 2005

Through the formative analysis of the traditional jokakbo, we have composed surface composition that was made by a perfect square, triangle, a weather vane type, vertical type, cint$\tilde{a}$mani type, and a mixed rectangular. And we have composed that was made by vivid tone, pale tone, and so on, and finally analyzed image, preference rate of them. First, the cause of composition for the image of stimulant was composed by the cause of simplicity characteristics, interesting characteristics, rigid-flexibility characteristics, and modern characteristics. Secondly, the image of clothes was revealed as a simple image of perfect square, a feminine image of cint$\tilde{a}$mani type, a modern image of mixed rectangular in the case of large pattern. And in the case of small pattern, perfect square was revealed as a simple image, cint$\tilde{a}$mani type was revealed as a feminine image, triangle with achromatic colored weather vane type and pale tone was revealed as an interesting image, achromatic colored and pale toned a weather vane type, vivid toned vertical type was revealed as a modern image. Lastly, it revealed that the preference rate against clothes is related with the cause of simplicity characteristics, interesting characteristics, and rigid-flexibility characteristics in the case of large patterns, and especially in the case of large patterns and small patterns, the clothes of pale tone are more preferred. And achromatic colored mixed rectangular and chromatic colored cint$\tilde{a}$mani type are more preferred by the large patterns, and chromatic colored and pale toned weather vane type is more preferred by the small patterns.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.273-281
• /
• 2001

In order to overcome the demerit and to improve the operation characteristics of Moving Coil type Linear Oscillatory Actuator(MC-LOA) with single-pole permanent magnet, this paper presents two models having the balanced magnetic circuit by multi-pole permanent magnet. They are short coil type with two-pole single-sided and two-ple double-sided permanent magnet. The characteristics between single-pole and multi-pole permanent magnet type MC-LOA are compared. As a result, multi-pole type MC-LOA has more merits than single-pole type about operation characteristics improvement and machine volume. The characteristics analysis is performed by their dynamic analysis composed of kinetic and electric equations and Finite Element Method(FEM). The propriety of multi-pole type MC-LOA model is verified with analysis results.