• 한국가스학회지
• /
• 제23권3호
• /
• pp.46-50
• /
• 2019

본 연구에서는 250kg 정도의 저장용량을 갖는 LPG 미니탱크에 대한 강도안전성을 FEM으로 해석하였다. FEM 해석결과에 의하면, 250kg의 저장용량을 갖는 LPG 미니탱크의 코너 반경은 175~205mm로 설계하는 것이 바람직한 것으로 나타났다. 일반적으로 가스저장탱크의 상하단부를 형성하는 경판의 코너 반경을 크게 설계할수록 강도 안전성은 높아지지만, 탱크의 내용적이 줄어들기 때문에 최적의 설계 데이터를 도출하는 것이 중요하다. 또한, 가스탱크의 강도를 안전하게 설계하기 위해 탱크의 두께를 두껍게 설계하려고 하지만, 두꺼운 강판을 사용하면 소재비와 운반비가 상승하므로 강판의 최적두께를 4.5~5.5mm에서 선정하는 것이 바람직하다. LPG 가스탱크의 액위를 측정하기 위해 사용하는 레벨게이지를 탱크의 측벽면에 구멍을 뚫어서 조립하는 기존의 방식보다 가스탱크의 중심축에 컬럼을 설치하는 레벨게이지 타입을 일체형으로 설계하는 것이 2배의 강도안전성을 높여주는 효과가 있다.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.71-82
• /
• 2001

The heat transfer experiment in a latent heat storage tank as a solar energy storage system for the hot water supply was carried out. The latent heat storage tank was consisted of triple - tube type ; Outer shell for hot water from solar collector, PCM storage vessel in the middle of the tank and inside tube for hot water recovery. The heat storage tank has the dimension of 60 cm long and 34 cm outside diameter. Paraffin wax(m.p = 55.4C) and sodium acetate trihydrate(m.p = 58 C) were employed as the PCM this study. Experimental variables were inlet temperature and flow rate of the hot water for heat storage stage and cold water for heat recovery stage. Temperature profiles, heat transfer coefficient and the efficiency of heat storage$(Q/Q_{max})$ and heat recovery $(Q/Q_{max})$ were determined for the paraffin wax and inorganic salt respectively.

• 한국전산구조공학회논문집
• /
• 제32권3호
• /
• pp.155-164
• /
• 2019

이 연구에서는 기초의 종류에 따라 지반-구조물 상호작용(SSI) 효과가 LNG 저장탱크의 지진응답해석에 미치는 효과를 분석하였다. 이를 위하여 직경 71m인 LNG 탱크와 기반암 위 점토지반의 깊이가 30m인 지반조건을 고려하였다. 그리고 기초형식으로 네 가지(얕은 기초, 말뚝지지 전면기초, 말뚝기초(지표면 접촉식, 부유식)를 고려하였다. 지반의 비선형성은 자유장 지반에 대하여 등가선형화기법으로 고려되었다. 또한, 말뚝기초의 시공과정에서 발생하는 동다짐 효과에 대해서도 분석하였다. SSI 해석을 위하여 진동수영역 해석프로그램인 KIESSI-3D를 이용하였다. 지반-구조물 상호작용 해석을 통해 LNG 저장탱크의 외조 벽체 쉘의 응력과 내조탱크의 밑면전단력 및 전도모멘트를 구하였다. 해석결과로부터 다음과 같은 결론을 얻을 수 있었다: (1) 고정 기초해석에 의한 외조와 내조탱크의 지진응답이 SSI 효과로 인한 지진응답보다 매우 컸다. (2) SSI의 효과가 내조탱크와 외조탱크의 동적응답에 미치는 영향은 기초의 형식에 따라 다르게 나타난다. (3) 말뚝지지 전면기초에서 동다짐 효과에 의한 구조물 응답의 변화는 약 10%로서 무시할 수 없을 정도로 큰 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제37권2호
• /
• pp.121-131
• /
• 2004

일 단위 강우-유출 모형인 SIMHYD와 TANK를 소양강댐과 영천댐 유역에 적용하여 유출을 예측하였다. 7개의 매개변수를 가진 SIMHYD와 17개의 변수를 가진 TANK모형을 국내 유역에 적용하여 모형의 적용성을 비교 평가하였다. 두 모형에 세 가지 목적함수를 달리하여 세 가지의 최적화 방법(유전자 알고리즘, Pattern Search MUlti-Start, Shuffled Complex Evolution Algorithm)을 적용하여 모형과 목적함수에 따른 관측 유출량에 대한 모의유출량의 모의 효율을 비교하였다. TANK모형의 모의 효율이 SIMHYD 모형의 모의 효율에 비해 높게 나타났다. 목적함수를 달리할 경우는 무차원 함수인 Nash-Sutcliffe 계수를 비교하는 것이 모델의 적용성을 평가하는데 적합한 것으로 평가되었다.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.468-474
• /
• 2006

In the secondary settling tanks, three different types of settling phenomena occurs; i.e., zone settling for sludge thickening in the bottom part of settling tank, and discrete and flocculent settling for clarification in the upper part. In this paper, morphological parameters of the floc in sludge blanket layers along the length of a long rectangular tank were investigated. The plant used for this study had a serious bulking problem caused by Microthrix parvicella. Floc size decreased as the surface area of settling tank increases, which indicates that in the secondary settling tank where zone settling believed to be predominant, free or flocculent type of settling contributes to floc size distributions. Large floc particles deposit in the front zone of settling tank, but small and loose flocs mostly in the zone near its outlet. On the other hand, filament length contained in one gram of sludge blanket solid increases along the flow direction. Large flocs with less filaments settle faster, but small flocs having more filaments result in poor settling. These results support function of microorganism selection occurring in secondary settling tank. In addition, designing a long rectangluar settling tank with double hoppers might be one of the ways of bulking control, but this idea has to be verified with a further study.

• 태양에너지
• /
• 제19권2호
• /
• pp.1-8
• /
• 1999

The heat transfer characteristics of ice storage system of falling film type using sprial coil is investigated. The experimental facilities consisted of a water tank, spiral coils located above the tank, an upper water distributor, and a circulating water pump. Water is distributed uniformally over the spiral coils and it forms falling thin films. In the process of freezing, ice is formed on outside of the spiral coils through recirculation of tank water. In the process of melting, ice is melted with return water from the heat load, while the water is chilled again and drops into the tank. The results of falling film type of ice thermal storage system are as follows. The highly efficient shower flowrates for icing is near $3{\ell}/min$. Icing rates on spiral coils is rosed while brine flowrates is increased. Lower brine temperature is not only increased freezing rates but. also become higher total icing weight and overall heat transfer coefficient. Smaller shower flowrates is obtained lower water temperature on outlet for a long time. The amounts of quantity can be detected more accurately by measuring storage tank weight.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.213-221
• /
• 2023

The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m³. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.813-819
• /
• 2011

본 연구에서는 연료전지자동차의 초경량 복합재료 수소 탱크에 대한 수소 충전 특성을 파악하고, 충전 조건에 따른 수소 탱크의 안전성을 확인하기 위해 플라스틱 라이너를 사용하는 Type 4 수소 탱크와 알루미늄 라이너를 사용하는 Type 3 수소 탱크에 대해 수소 충전 시, 수소 탱크 내부의 가스 온도 및 압력 변화, 라이너 및 복합재료 층의 온도 변화 등을 측정하여 그 특성을 고찰하였다. 그 결과 충전 속도가 증가함에 따라 탱크 내부 가스의 온도가 증가하였고, 탱크 내부 가스의 온도 분포가 다르게 나타났다.

• 한국산업보건학회지
• /
• 제24권1호
• /
• pp.74-78
• /
• 2014

Objectives: Purpose of this study was to evaluate the noise level exposures at the different cannonball type and locations in the tank gun drill ranges. Methods: We visited the tank gun drill ranges and measured with a sound level meter(3M Quest SoundPro$^{TM}$) with the value of Peak(dB(A)). Results: The highest peak value of impulse noise level averaged 166.3 dB(A) at the site of loading solider. The highest peak value of impulse noise level by size of cannonball averaged 165.9 dB(A) at the 120 mm size cannonball of the tank. This result was significantly different from the other size of cannonballs such as 7.62 mm, 90 mm, and 105 mm(p < 0.001). Among the four types of soldier site on the tank, average noise levels of loading soldier, 156.6 dB(A), were higher than the other three types of soldier site (p > 0.05). Conclusions: This study confirmed that there were needed for a proper control to reduce the amount of impulse noise exposure at the tank gun drill ranges.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.70-75
• /
• 2001

Intensive experimental investigations were carried out to provide information of the effects of inflow on the rolling characteristics and stability of ships, which becomes great concern in relation to ship's capsizing. A series of systematic experiments have been performed considering the effects cf combined motion of roll-heave-sway and relevant parameters, such as roll angle and period, tank water height etc. To accommodate this type of experiments with 3-degree of freedom of motion, a bench tester has been developed and verified using existing data. Also, theoretical application of anti-roll tank has been incorporated to support the process of investigation. A model of Ro-Ro ships is used in the present study as this type of vessels, as well as fishing vessels, with large open decks, can loose stability rapidly when there is inflow on the decks.