• 대한간호학회지
• /
• 제33권6호
• /
• pp.753-761
• /
• 2003

Purpose: The study was done to examine the effects of San- Yin-Jiao(SP6) acupressure treatment on subjective labor pain, length of delivery time in women during labor. Method: The study design was a randomized controlled clinical trial study using a double-blinded method. Data were collected using a structured questionnaire, a subjective labor pain scale and measurement of delivery time. The experimental group(n=29) was received SP6 acupressure and control group(n=29), SP6 touch for the duration of each uterine contraction, during 30 minutes after 3cm dilatation of cervical os. Result: The subjective labor pain scores was significantly different between the two groups(p=0.042). The total length of delivery time in the group which had the SP6 acupressure was shorter than SP6 touch group (p=0.036). Conclusion: These findings showed that SP6 acupressure was effective related to labor pain, length of time for delivery. SP6 acupressure during labor could be applied as an effective nursing treatment.

• 한방안이비인후피부과학회지
• /
• 제37권1호
• /
• pp.113-125
• /
• 2024

Objectives : The purpose of this study is to report the effect of Korean-Western medicine combination treatment administered to two patients with acute herpes zoster. Methods : During hospitalization, the two patients were treated with Hyeonggaeyeongyotang-gagam, Hwangryunhaedok-tang wet dressing, pharmacopuncture, acupuncture, and other western medications including antiviral and analgesic agents. Photographs of skin lesions, numeric rating scale(NRS), and visual analog scale(VAS) were used to assess the improvement of symptoms. Results : At the time of discharge, both patients showed remarkable improvement in skin lesions, NRS for pain, and VAS for pruritus and insomnia. Conclusions : The results demonstrated that Korean-Western medicine combination treatment may be effective for treating herpes zoster.

• Computers and Concrete
• /
• 제34권1호
• /
• pp.123-135
• /
• 2024

Strain-hardening cement-based composites (SHCC) under cracked condition exhibits remarkable capillary absorption due to water ingress from multiple cracks. Surface treatment using water repellent agents is an effective way for improving water resistance of SHCC, but the water resistance may remarkably decrease when cracks penetrate impregnation depth. Another way is to add water repellent agents directly into the mixture, offering SHCC integral water repellency even if cracks form later. However, although integral water repellent treatment has been proved feasible by previous studies, there is still lack of simulation work on the treated SHCC for evaluating its durability. This study presents a simulation method for capillary absorption of cracked SHCC with integral treatment based on a multi-scale approach proposed in the authors' previous work. The approach deals with water flows in bulk matrix and multiple cracks using two individual transport equations, respectively, whereas water absorbed from a crack to its adjacent matrix is treated as the mass exchange of the two equations. In this study, the approach is enhanced for the treated SHCC by integrating the influencing of water repellency into the two transport equations as well as the mass exchange term. Using the enhanced approach, capillary absorption of water repellent SHCC under cracked condition is simulated, showing much more reduced water ingress than the untreated concrete, which is consistent with total absorption data from previous tests. This approach is also capable of simulating water spatial distribution with time in treated SHCC reasonably.

• 한국대기환경학회지
• /
• 제20권1호
• /
• pp.59-68
• /
• 2004

In this study, we investigated the concentrations of volatile organic compounds (VOC) in the ambient air of a small scale municipal waste landfill site. Seasonal sampling was carried out simultaneously at two sites, i.e. one in the center of the landfill area, and the other at a boundary site. Among 38 target VOC, toluene appeared to be the most dominant compound, followed by benzene. and xylenes. The higher levels of BTX imply that paint -containing materials and/or organic solvents are the most significant sources of the VOC in the landfill environment. Seasonal variations for the samples collected at the landfill site indicated that the VOC concentrations tend to be higher in the spring and fall season and lower in the winter season. In addition, night- time concentrations appeared to be generally higher than day-time. Such daily variation might be due to more stabilized atmosphere during the night-time. Similar patterns were also found in samples collected at a boundary site. This study demonstrated that the municipal landfill, although it is small -scaled, could be an important emission source of atmospheric VOC, particularly in the vicinities of the landfill. Thus, an appropriate control strategy is required to prevent any undesirable secondary pollutions from the environmental sanitary facilities such as landfill.

• Journal of applied mathematics & informatics
• /
• 제30권1_2호
• /
• pp.289-304
• /
• 2012

In this paper, we study asymptotic behaviour of solutions of the following higher order nonlinear dynamic equations $$S_n^{\Delta}(t,x)+{\delta}p(t)f(x(g(t)))=0$$ and $$S_n^{\Delta}(t,x)+{\delta}p(t)f(x(h(t)))=0$$ on an arbitrary time scale $\mathbb{T}$ with sup $\mathbb{T}={\infty}$, where n is a positive integer, ${\delta}=1$ or -1 and $$S_k(t,x)=\{\array x(t),\;if\;k=0,\\a_k(t)S_{{\kappa}-1}^{\Delta}(t),\;if\;1{\leq}k{\leq}n-1,\\a_n(t)[S_{{\kappa}-1}^{\Delta}(t)]^{\alpha},\;if\;k=n,$$ with ${\alpha}$ being a quotient of two odd positive integers and every $a_k$ ($1{\leq}k{\leq}n$) being positive rd-continuous function. We obtain some sufficient conditions for the equivalence of the oscillation of the above equations.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.15-17
• /
• 2019

We present terahertz optical properties of $GdBa_2Cu_3O_{7-x}$ (GdBCO) superconducting thin films. GdBCO films with a thickness of about 105 nm were grown on a $LaAlO_3$ (LAO) single crystal substrate using a conventional pulsed laser deposition (PLD) technique. Using an Ar ion milling system, the thickness of the GdBCO film was reduced to 58 nm, and its surface was also smoothened. Terahertz (THz) transmission spectra through two different GdBCO films are measured over the range between 0.2 and 1.5 THz using THz time domain spectroscopy. Interestingly, the THz transmission of the thinner GdBCO film has been increased to six times larger than that of the thicker one, while the thinner film is still maintaining its superconducting property at below 90 K.

• 자원환경지질
• /
• 제29권6호
• /
• pp.713-724
• /
• 1996

현장에서의 주요 운송 메카니즘을 연구하기 위하여 시간별 잔존수 농도분포곡선 자료를 이용하였다. 운송개념을 대표하는 모델로서 2개의 상반된 가설에 근기한 모델, 즉 CDE와 CLT모델을 사용하였으며 파라미터 추정을 위하여 깊이별 평균농도자료에 최적화기법을 적용하였으며 잔존수 농도의 도달시간을 나타내는 확율밀도함수를 이용하여 모멘트해석도 시행되었다. 모멘트 해석결과 잔존수농도의 1차 및 2차 시간 모멘트는 침출수농도의 것들보다 크게 나타났다. 또한 시간 모멘트를 이용하여 오염물질 운송시간의 변이도와 확산 파라미터도 도출되었다. 변이도 및 확산계수와 운송거리간의 상관관계는 침출수농도 및 잔존수농도에 대해서 동일하게 나타났다. 이러한 관계를 이용하여 2가지 모델을 검정하였으나 운송거리에 따른 운송파라미터의 불규칙한 변화로 확정적 결론을 얻을 수 없었다. 따라서 첫 번째 깊이에서 얻은 파라미터를 이용하여 다른 깊이에서의 오염물질 운송 방식을 예측하여 실측자료와 비교하여 각 모델을 검정하였다. 그 결과 CLT 모델이 CDE 모델보다 현장실측자료에 근접하였다. 이는 오염물질이 이동함에 따라 완전한 혼합이 발생하는 것이 아니라 상관흐름 즉, "오염물질이 각 층을 통과할 때 빠른 물질은 빠르게 느린 물질은 지속적으로 느리게 움직인다"는 사실을 뒷받침한다고 볼 수 있다. 특히 첨두농도에 대한 CDE 모델의 과대예측은 오염물질 확산의 과소평가에 기인하는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제38권4호
• /
• pp.429-441
• /
• 2011

In large-scale problem, a huge size of computational resources is needed for a reliable solution which represents the detailed description of dynamic behavior. Recently, eigenvalue reduction schemes have been considered as important technique to resolve computational resource problems. In addition, the efforts to advance an efficiency of reduction scheme leads to the development of the multi-level system condensation (MLSC) which is initially based on the two-level condensation scheme (TLCS). This scheme was proposed for approximating the lower eigenmodes which represent the global behavior of the structures through the element-level energy estimation. The MLSC combines the multi-level sub-structuring scheme with the previous TLCS for enhancement of efficiency which is related to computer memory and computing time. The present study focuses on the implementation of the MLSC on the direct time response analysis and the frequency response analysis of structural dynamic problems. For the transient time response analysis, the MLSC is combined with the Newmark's time integration scheme. Numerical examples demonstrate the efficiency of the proposed method.

• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.281-293
• /
• 2014

The present work aimed to study the decolorization kinetics and characteristics of a selected azo dye under the influence of two key operational parameters including hydraulic retention time (HRT) and solid retention time (SRT). The decolorization efficiency and the two important criteria of k and normalized k (k/MLSS) were evaluated in lab-scale membrane sequencing batch reactors (MSBRs) at various HRTs of 48, 24 and 16 h (with constant SRT) and in addition, at various SRTs of infinity, 40 and 10 d (with constant HRT). According to the obtained results, both zero and first-order kinetics were properly fitted the decolorization profiles of the selected azo dye in all of the applied HRTs and SRTs. Increase of both HRT and SRT positively affected the decolorization efficiency. More MLSS concentrations corresponded to the lower HRTs and the higher SRTs resulted in higher decolorization rate constants (k). However, the effect of reducing the HRT was not compensated by increase of the MLSS concentration in order to reach higher decolorization efficiency. In addition, increase of the decolorization efficiency, as a consequence of the higher MLSS concentrations at longer SRTs, was restrained by decrease of the time-limited decolorization capability of biomass (represented by normalized k). Evaluation of both k and normalized k is suggested in order to have a more precise study on the decolorization kinetics and characteristics.

• Structural Engineering and Mechanics
• /
• 제43권3호
• /
• pp.311-320
• /
• 2012

The higher-order asymptotic C(t) - $A_2(t)$ approach was employed to investigate the crack-tip stress of two collinear cracks in a power-law creeping material under the plane strain conditions. A comprehensive calculation was made of the single crack, collinear crack model with S/a = 0.4 and 0.8, by using the C(t) - $A_2(t)$ approach, HRR-type field and the finite element analysis; the latter two methods were used to check the constraint significance and the calculation accuracy of the C(t) - $A_2(t)$ approach, respectively. With increasing the creep time, the constraint $A_2$ was exponentially increased in the small-scale creep stage, while no discernible dependency of the constraint $A_2$ on the creep time was found at the extensive creep state. In addition, the creep time and the mechanical loads have no distinct influence on accuracy of the results obtained from the higher-order asymptotic C(t) - $A_2(t)$ approach. In comparison with the HRR-type field, the higher-order asymptotic C(t) - $A_2(t)$ solution matches well with the finite element results for the collinear crack model.