X-線 照射가 래트 태아의 발육에 미치는 영향 (Effect of X-irradiation on Fetal Development During Pregnancy in the Rats)
-
- 한국임상수의학회지
- /
- 제18권2호
- /
- pp.146-151
- /
- 2001
This study was carried out to find if the X-irradiation being used for clinical diagnosis during pregnancy would affect fetal development and cause fetal malformation in rats or not. To determine the dose and irradiation frequency of X-irradiation and gestation period by which fetal development would be affected when irradiated during pregnancy, seventy-two Sprague Dawley female rats (8 weeks old) were used for the experiment and grouped into three according to different gestation period of 5-8 days, and 6-12 days of gestation. Experimental rats were irradiated on the daily irradiation conditions of 40, 60, 80 kvp(kilo volt peak), 150 mA(milliampere), 0.25 sec and 4 times/day for both 5-8 days and 10-13 days of gestation, and 100 kvp, 100 mA, 2 min. and 4 times/day for 6-12 days of gestation. Rats were put in a small dark box when irradiated, which animals were sacrificed on the 20th day of gestation and mean litter size, fetal body weight, fetal crown-rump length(CRL) were investigated along with pathological findings. 1. Litter size were significantly decreased in the rats which were irradiated by both 60 and 80 kvp during 5 to 8 days of gestation and by 100 kvp during 6-12 days of gestation compared to those from the control rats(p<0.05) 2. Fetal body weight was significantly decreased in the fetus from the rats which were irradiated by both 60-80 kvp during 5-8 days of gestation and by 100 kvp during 6-12 days of gestation compared to those from the control rats(p<0.05). 3. There was no significant difference of fetal crown-rump length between all the experimental rats and the controls. 4. Fetal absorption, fetal death, and fetal malformation were not observed in the fetus form the rats irradiated by 40-80 kvp during 5-8 and 10-13 days of gestation, however, the pathological findings were found in those from the rats irradiated by 100 kvp during 6-12 days of gestation. 5. The harmful effect of x-irradiation on fetal development was estimated to occur when irradiated during 5-8 days of gestation. These results indicated that even X-irradiation for clinical diagnosis could affect fetal development in the early embryonic stage and when the fetus were exposed to frequent and prolonged x-irradiation with over dose.
본 논문에서는 타 재료에 비해 수소 원소 함유량이 높아 고속 중성자 차폐에 유리한 합성 고분자 화합물과 중성자 포획단면적이 큰 붕소화합물을 각각 혼입한 모르타르를 대상으로 중성자 차폐성능을 분석하였다. 합성 고분자 화합물의 종류, 형상, 크기, 함량 및 붕소화합물의 함량에 따라 총 16개 모르타르 배합을 설계하였으며, 각 배합의 슬럼프 플로우, 28일 압축 및 인장강도를 측정하고, 고속 중성자 및 열중성자에 대한 차폐실험을 수행하였다. 합성 고분자 화합물의 선량 투과율은 모르타르 대비 최대 38.5%까지 감소하였으며, 공기 중 선량의 26.3%까지 차폐하였다. 붕소화합물을 혼입한 모르타르의 열중성자 차폐율은 최대 90.3%로 대부분의 열중성자를 차폐하였다. 비록 화합물 혼입에 의해 모르타르의 기본 특성은 저하되었으나, 표면 개질, 특수 혼화제 첨가 등 지속적인 연구를 통하여 성능 저하를 최소화할 수 있을 것으로 판단되며, 중성자 투과성능 역시 다양한 타입의 시험체 조합을 통한 레이어 시스템 도입 등으로 다양한 투과성능에 따른 맞춤형 설계를 제공할 수 있을 것이다.
참외 재배시설의 광 환경 개선을 위하여 필름두께, 자외선 차단율, 적외선 흡수율이 다른 polyolefin계 필름 3종(J-1, J-2, J-3), polyethylene계 필름(K-1, K-2 농가에서 관행으로 사용하는 폴리에틸렌 필름(K-3)을 대조구로 시험한 결과, 보온성은 K-3처리구에 비하여 J-2 처리구에서 가장 높았고 J-3, J-1 순이었다. 초기생육, 암꽃 개화 및 수확소요일수는 재배지역과 품종에 따라 다소 차이는 있으나 K-3 처리구에 비하여 J-1, J-2, J-3 처리구에서 초기생육이 촉진되었고 첫 수확소요 일수도 10일 이상 단축되었다. 10a당 상품수량은 K-3 처리구의 991kg에 비하여 J-1, J-2, J-3, K-1 및 K-2 처리구에서 각각 21%, 37%, 24%, 13%, 4%증가하였다. 특히 J-1, J-2, J-3 및 K-1 처리구는 초기, 중기, 후기의 수량 비율이 각각 50%, 40%, 10%로 초기 및 중기의 수량이 많았다. 이상의 결과로 볼 때 보온성이 강화된 polyolefin계 필름은 저온기 참외 시설재배 시 생육을 촉진시켜 수확소요 일수를 단축시키고 조기수량을 증가시키는 것으로 생각된다.
Nutrient utilization and plasma level of minerals were studied in lactating crossbred cows fed diet supplemented from different source of minerals. Twelve crossbred cows of first to third lactation during their mid stage of lactation were distributed equally under two groups and were fed concentrate mixture, green fodder (para grass) and finger millet straw as per requirement. Cows in group I were fed concentrate mixture supplemented with 1% mineral mixture whereas cows in group II were not supplemented with mineral mixture in the concentrate mixture but were offered additional quantity of green fodder (1 kg DM/cow/day) to compensate for the requirement of minerals. Balance study conducted towards the end of 120 days of feeding experiment indicated that the total dry matter intake in both the groups did not differ significantly. The cows in group II offered additional quantity of green fodder consumed significantly (p<0.05) more of green fodder (5.11 vs. 4.51 kg /animal/day) and the cows in group I consumed significantly (p<0.01) more of finger millet straw (1.71 vs. 0.92 kg/animal/day). The digestibility of major nutrients did not differ between the groups except for ether extract which was significantly (p<0.05) lower in cows fed additional green fodder. The total daily intake of P, Cu, Fe and Co did not differ significantly in both the groups whereas significantly higher intakes of Ca, Mg, Zn and Mn were observed in cows supplemented with inorganic source of minerals. However, supplementation through both the sources could meet the mineral requirement in group I and group II. The gut absorption (%) of all the minerals was comparable between the groups except for Mg which was significantly (p<0.05) higher in cows supplemented mineral mixture. The net retention of all the minerals was significantly more in the group supplemented with inorganic source of minerals. Except for P, Mg and Co the retention as percentage of total intake was comparable for all minerals in both the groups. Irrespective of source of mineral supplementation the average monthly blood plasma mineral levels (Ca, P, Mg, Cu, Zn, Fe) were within the normal range and comparable between the groups. Lower level of Cu observed at the start of the experimental feeding in both the groups increased with the advancement of supplemental feeding. The plasma Zn and Fe content in cows of both the groups did not vary. The blood plasma level of some minerals (Ca, P, Mg and Cu) was significantly higher towards the end of experimental feeding as compared to the initial values due to the reduction in milk yield with advancement of lactation or due to supplemental effect of minerals. It could be concluded that supplementation of minerals through inorganic source is better utilized in terms of retention as compared to green fodder (para grass), which is a moderate source of most nutrients.
The use of water by cities is increasing owing to industrialization, the concentration of population, and the enhancement of the standard of living. Accordingly, the amount of waste water is also increasing, and the degree of pollution of the water system is rising. In order to solve this problem, it is necessary to remove organisms and suspended particles as well as the products of eutrophication such as nitrates and phosphates. This study developed a high-end treatment engineering solution with maximum efficiency and lower costs by researching and developing a advanced treatment engineering solution with the use of Biosorption. As a result, the study conducted a test with a
The Dissolved Organic Carbon (DOC) existing in a water includes both hydrophobic and hydrophilic substances however, most of the discussion focuses on hydrophobic substances. The hydrophobic fraction was easily removed by absorption or coagulation more than hydrophilic fraction. Therefore, control of the hydrophilic fraction is very important in water treatment process. This study is to determine the variation of DOC, the removal efficiency of DOC, and Trihalomethane formation potential (THMFP) after each stage of water treatment process by fractionating Natural Organic Matters (NOM) into hydrophobic and hydrophilic substance. DOC from raw water was fractionated at acidic pH (pH<2) using XAD 8 resin column, into two fraction : hydrophobic substance (i.e. humic substance) adsorbed on XAD 8 and hydrophilic substance which represent the organics contained in the final effluent. THMFP was carried out according to the following set condition: Cl2/DOC=4 mg/mg, incubation at
본 연구는 구리 갈매유적 회곽묘의 회곽을 대상으로 물리화학적 및 암석광물학적 분석을 통해 성분 및 재질특성을 밝혔으며 다양한 강도시험을 수행하였다. 회곽의 대부분에서는 은미정질의 방해석과 함께 석영, 장석 및 운모가 동정되었으며 주로 석회기질로 구성되어 있다. 석회질 기질은 판상의 치밀한 조직을 보이고 일부 시료에서는 침상조직의 수화물이 나타나며, 탄산화반응이 불량한 부분에서는 이차적으로 생성된 석고가 관찰된다. 회곽의 CaO 함량은 4.43~36.19wt.%의 넓은 범위에서 확인되며, 비중은 1.35~1.62의 범위에서, 흡수율은 20.1~32.6%를 보인다. 반발경도는 10.0~28.4(평균 15.7)의 범위를 나타냈으며
본 연구는 다양한 순환 및 시효 조건 하에서 제V급 복합레진 수복물의 표면전색이 미세변연누출에 미치는 효과에 대해 알아보고자 하였다. 100개의 건전한 소구치의 협면에 제V급 와동을 형성하고 제조사의 지시대로 광중합형 복합레진으로 수복하였다. 무작위로 나누어 표면전색을 시행하지 않는 I군과 표면을 산부식 후 표면전색을 시행한 II군으로 설정한 후 열순환(thermocycling)을 하였다. 각 군에서 하위군(A군= 열순환 외 다른 시효조건이 없는 군, B군=칫솔질군, C군=부하순환군, D군=칫솔질과 부하순환을 모두 시행한 군, E군=6개월간 증류수에 보관한 군)으로 나누어 각각에 맞는 시효조건을 시행하였다. 2% methylene blue 용액에 침윤시켜 변연의 미세누출정도를 평가하여 다음과 같은 결과를 얻었다. 1. 표면전색을 시행하지 않은 군의 교합변연과 치은변연에서 시효조건에 따른 미세누출의 유의한 차이는 보이지 않았다(p>0.05). 2. 표면전색을 시행한 군의 교합변연에서는 시효조건에 따른 미세누출의 유의한 차이가 없었다(p>0.05). 3. 표면전색을 시행한 군의 치은변연에서는 부하순환이나 6개월간 증류수에서 보관하는 시효과정을 거친 군에서 미세누출이 유의하게 크게 나타났다(p<0.05). 4. 시효조건이 없는 군과 칫솔질군의 경우, 표면전색을 시행한 군이 표면전색을 시행하지 않은 군에 비해 유의하게 적은 미세누출결과를 보였다(p<0.05). 5. 부하순환을 시행한 군과 6개월간 증류수에서 보관한 경우에는 표면전색을 시행한 군과 표면전색을 시행하지 않은 군 사이에 미세누출의 차이가 있었지만 유의차가 없었다(p>0.05). 따라서 이 연구의 결과는 변연부분의 미세간격으로 침투한 표면전색제가 처음에는 미세누출을 감소하는데 효과를 보여주었으나, 교합시 교두가 휘어져서 생기는 응력과 장기간의 수분흡수로 인한 변화를 견디기에 불충분함을 보여주었다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70