• Computers and Concrete
• /
• 제31권6호
• /
• pp.469-484
• /
• 2023

The response mechanism of simply supported two-way reinforced concrete (RC) slabs under fire was numerically studied from the view of stress redistribution using the finite element software ABAQUS. Results show that: (1) Simply supported two-way RC slabs undergo intense stress redistribution, and their responses show four stages, namely elastic, elastic-plastic, plastic and tensile membrane stages. There is no cracking in the fire area of the slabs until the tensile membrane stage. (2) The inverted arch effect and tensile membrane effect improve the fire resistance of the two-way slabs. When the deflection is L/20, the slab is in an inverted arch effect state, and the slab still has a good deflection reserve. The deformation rate of the slab in the tensile membrane stage is smaller than that in the elastic-plastic and plastic stages. (3) Fire resistance of square slabs is better than that of rectangular slabs. Besides, increasing the reinforcement ratio or slab thickness improves the fire resistance of the slabs. However, an increase of cover thickness has little effect on the fire resistance of two-way slabs. (4) Compared with one-way slabs, the time for two-way slabs to enter the plastic and tensile cracking stage is postponed, and the deformation rate in the plastic and tensile cracking stage is also slowed down. (5) The simply supported two-way RC slabs can satisfy with the requirements of a class I fire resistance rating of 90 min without additional fire protection.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.24-27
• /
• 2002

Recently the steel parts used in automobiles are required to be used under high stress more than ever before due to the need of keeping the weight down. To achieve this requirement of the high strength steel, it must be necessary to decrease inclusion contents and surface defects as like decarburization, surface roughness etc. In this study, the surface conditions are measured to know the influence on fatigue properties by two cases of two-stage shot peening and single-stage shot peening. And for this study, three kinds of spring steel (JISG408l-SUP7, SAE 9254 and DIN 50CrV4) are shaped. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotating bending fatigue test and it results from (1) decreasing the surface roughness (2) unchanging the surface hardness (3) increasing the compressive residual stress. Moreover, results also show fatigue failures originated at the inclusion near the surface, and this inclusion type is turned out to be an alumina of high hardness.

• 한국약용작물학회지
• /
• 제12권5호
• /
• pp.372-377
• /
• 2004

Scopolia parviflora Nakai, a rare and endangered species, is the sole plant producing tropane alkaloids (TA) among the Korean native species. In order to enhance TA productivity the SP72 root line was selected by screening 100 of root line, and the optimal culture media for root growth and TA production were investigated with the SP72 roots. Based on the several media, SH and 2B5 medium were determined as growth medium and White and NN medium as production medium. Among the four combinations of two-stage culture, 2BN (2B5 as growth medium plus NN as production medium) showed more enhanced root growth and TA production as compared with production media of White and NN medium and growth media of SH and 2B5 medium, respectively. However, bubble column bioreactor (BCB) cultures applying two-stage culture did not reveal the effective results despite of the each successful operation of two-stage culture in conical flasks and BCB cultures.

• 동력기계공학회지
• /
• 제18권1호
• /
• pp.57-62
• /
• 2014

This paper present the performance characteristics of R404A two-stage compression refrigeration system. The operating parameters considered in this study include evaporating and condensing temperature, subcooling and superheating degree, compressor efficiency. The main results were summarized as follows: The COP of two-stage compression refrigeration system using R404A has an effect on the variation of evaporation temperature, condensation temperature, subcooling degree and compressor efficiency, but not an effect on the superheating degree. R404A two-stage compression refrigeration system is unstable because COP of this system is significantly changed when evaporating temperature and compressor efficiency decreased. In particular, when compressor efficiency decreased, COP is significantly decreased. This is inefficient for long-term use.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.501-506
• /
• 2002

In this study, a novel systematic design procedure by Genetic Algorithm of a two stage relief valve is proposed. First of all. a mathematical model describing the dynamics of a balanced piston type relief valve has been derived. Governing equations such as dynamic equations for the main spool and the pilot spool and flow equations for each orifice are established. The mathematical model is verified by comparing the results of simulation with that of experiments. Furthermore, influences of the parameters on the dynamic characteristics of a relief valve have been investigated by simulation of the proposed model. Major design parameters on the valve response are determined, which affect the system response significantly. And then, using the determined parameters, the optimization of the two stage relief valve by Genetic Algorithm, which is a random search algorithm can find the global optimum without converging local optimum, is performed. The optimal design process of a two stage relief valve is presented to determine the major design parameters. Fitness function reflects the changing pressure according to parameters. It is shown that the genetic algorithms satisfactorily optimized the major design parameters of the two stage relief valve.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.758-766
• /
• 2006

A two-stage bioreactor, which consists of a biotrickling filter module and a biofilter module in series, was investigated for the enhanced treatment of a VOC mixture, toluene and methyl ethyl ketone (MEK). Throughout the experiments, the overall inlet loading rate was maintained at approximately $43g/m^3/hr$, but the inlet ratios of the VOCs were modified. The experimental results showed that the different ratios of the VOC mixture resulted in changes of overall removal efficiencies, elimination capacities (ECs) and microbial accumulation on the surface of each packing material. The ratio of inlet toluene to MEK at 50 : 150 was found to be most effective in terms of the overall removal efficiency, because, at this condition, MEK (i.e., the hydrophilic compound) was mostly removed in the biotrickling filter module and the following biofilter module was used to remove toluene. It was also found that when the inlet loading rate of the VOC mixture was serially increased stepwise within short-term periods, the ECs for toluene dropped significantly but the ECs for MEK increased at the ratio of the VOC mixture. These results implied that substrate interaction and/or substrate preferable utilization might have an effect on the biological removal of each compound in the two-stage bioreactor; therefore, the bioreactor should be operated in the condition where the substrate interaction could be minimized in order to maximize overall performance of the two-stage bioreactor.

• 설비공학논문집
• /
• 제24권7호
• /
• pp.585-590
• /
• 2012

The objective of this study is to investigate the performance of a two-stage compression heat pump system for district heating. The experimental setup of heat pump consists of compressor, condenser, evaporator, expansion device, intercooler, flash tank, oil separator and accumulator. The experimental evaluations on the two-stage compression cycle were carried out under various operating conditions which were heat source temperature, the degree of compressor inlet superheat, and intermediate pressure. The temperature ranges of unutilized energy as the heat source were used in the test conditions. As the heat source temperature increased from $10^{\circ}C$ to $30^{\circ}C$, the COP and heating capacity of the heat pump system increased by 22.6% and 45.8%, respectively. The performance of the two-stage heat pump system increased by 5.2% with the variation of the intermediate pressure in the same heat source temperature conditions.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.129-140
• /
• 1994

In this paper we investigate the hardware implementation of block matching algorithms (BMAs) for moving sequences. Using systolic arrays we propose a hardware architecture of a two-stage BMA using integral projections which reduces greatly computational complexity with its performance comparable to that of the full search (FS). Proposed hardware architecture is faster than hardware architecture of the FS by 2~15 times. For realization of the FS and two stage BMA modeling and simulation results using SPW and VHDL are also shown.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.657-663
• /
• 2005

Under the minimum risk point estimation formulation of Robbins(1959), we consider the sequential point estimation problem for normal population $N({\theta},\;{\theta})$ with unknown parameter ${\theta}$. In the case of completely unknown ${\theta}$, Stein's(1945) two-stage procedure is known to enjoy the consistency property, but it is not even first-order efficient. In the case when ${\theta}>{\theta}_L\;where\;{\theta}_L(>0)$ is known, the revised two-stage procedure is shown to enjoy all the usual second-order properties.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.5.1-5
• /
• 2003

In this paper, we study the convergence of relaxed multisplitting and relaxed nonstationary two-stage multisplitting methods associated with a multisplitting which is obtained from the ILU factorizations for solving a linear system whose coefficient matrix is an H-matrix. Also, parallel performance results of relaxed nonstaionary two-stage multisplitting method using ILU factorizations as inner splittings on the IBM p690 supercomputer are provided to analyze theoretical results.