• Journal of applied mathematics & informatics
• /
• v.39 no.1_2
• /
• pp.197-214
• /
• 2021

In this paper, we have studied dynamics of fractional order mathematical model of malaria transmission for two groups of human population say semi-immune and non-immune along with growing stages of mosquito vector. The present fractional order mathematical model is the extension of integer order mathematical model proposed by Ousmane Koutou et al. For this study, Atangana-Baleanu fractional order derivative in Caputo sense has been implemented. In the view of memory effect of fractional derivative, this model has been found more realistic than integer order model of malaria and helps to understand dynamical behaviour of malaria epidemic in depth. We have analysed the proposed model for two precisely defined set of parameters and initial value conditions. The uniqueness and existence of present model has been proved by Lipschitz conditions and fixed point theorem. Generalised Euler method is used to analyse numerical results. It is observed that this model is more dynamic as we have considered all classes of human population and mosquito vector to analyse the dynamics of malaria.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.305-315
• /
• 2012

Color correction between two or multiple images is very crucial for the development of subsequent algorithms and stereoscopic 3D camera system. Even though various color correction methods are proposed recently, there are few methods for measuring the performance of these methods. In addition, when two images have view variation by camera positions, previous methods for the performance measurement may not be appropriate. In this paper, we propose a method of measuring color difference between corresponding images for color correction. This method finds matching points that have the same colors between two scenes to consider the view variation by correspondence searches. Then, we calculate statistics from neighbor regions of these matching points to measure color difference. From this approach, we can consider misalignment of corresponding points contrary to conventional geometric transformation by a single homography. To handle the case that matching points cannot cover the whole regions, we calculate statistics of color difference from the whole image regions. Finally, the color difference is computed by the weighted summation between correspondence based and the whole region based approaches. This weight is determined by calculating the ratio of occupying regions by correspondence based color comparison.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• Information Systems Review
• /
• v.8 no.2
• /
• pp.211-234
• /
• 2006

The purpose of IT Service Level Management(SLM) has recently shifted from being a simple financial contract(SLA contract itself) towards a system(SLA management system) for the management of the customer's expectations and the provider's service. The aim of this paper is to introduce and present the systematic SLM using statistical method. We discuss the service level according to two points of view: statistical method and service level management. First, we go into more detail on the objective service level using statistical method. Second, we give an overview of total service level assessment method. The proposed framework enables to measure total service level as IT outsourcing performance quantitatively from the aspect of business strategy.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.479-485
• /
• 1999

This study was conducted to derived design floods by Generalized Extreme Value(GEV) distributiion for the annual maximum series at ten watersheds along Han, Nagdong, Geum , Yeongsan and Seomjin river systems. Adequency for the analysis of flood data used in this study was established by the test of Independence, Homogeneity , detection of Outliers. Coefficient of variation , skewness and kurtosis were calculated by the L-Moment, and LH-Moment ratio respectively. Parameters were estimated by the Method of L-Method of LH-Moment. Design floods obtained by Method of L-Moments and LH-Moments using different methods for plotting positions in GEV distributions and were compared with those obatined using the Method of L-Moments and LH-Moments by the Relative Mean Errors and Realtive Absoulte Errors. It was found that desgin floods derived by the method of L-Moments and LH-Moments using Cunnane plotting position foumula in the GEV distribution are much closer to those of the observed data in comparison with those obtained by methods of L-moments and LH-moments using the other formula for poltting postions from the viewpoint of Relative Mean Errors and Relative Absoulte Errors. In view of the fact that hydraulic structures indcluding dams and levees are generally usiong design floods with the return period of two hundred years or so, design floods derived by LH-Moments are seemed to be more reasonable than those of L-Moments in the GEV distribution.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.147-158
• /
• 2001

In general, two methods have been used to predict settlement of soft ground. One method is Terzaghi's one dimensional consolidation theory which gives time-settlement relationship using the standard consolidation test results. The other is forecasting method of ground settlement to be occured in the future using in-situ monitoring data. The above both methods have some defects in application manner or in itself especially in very deep and soft clayey ground. In view of the lessons and experiences of soft ground improvement projects, several techniques were proposed for more accurate theorectical calculation of consolidation settlement as follows ; ① Subdivision of soft ground, ② Consideration of secondary compression, ③ Using the modified compression index, etc. And also, revised hyperbolic fitting method was suggested to minimize the error of predicted future settlement. In addition, revised De-Beer equation of immediate settlement of loose sandy soil was proposed to overcome the tendency to show too small settlement calculation results by original De-Deer equation. And also, considering the various effects of settlement delay in the improved ground by vertical drains, time-settlement caculation equation(Onoue method) was revised to match the tendency of settlement delay by using the characteristics of discharge capacity decreases of vertical drain with time elapse by the pattern of hyperbolic equation.

• Journal of computational fluids engineering
• /
• v.7 no.1
• /
• pp.10-19
• /
• 2002

The non-staggered(collocated) grid approach in which all the solution variables are located at the centers of control volumes is very popular for incompressible flow analyses because of its numerical efficiency on the curvilinear or unstructured grids. Rhie and Chow's paper is the first in using non-staggered grid method for SIMPLE algorithm, where pressure weighted interpolation was used to prevent decoupling of pressure and velocity. But it has been known that this non-staggered grid method has stability problems when pressure fields are nonlinear like in natural convection flows. Also Rhie-Chow scheme generates large numerical diffusion near curved walls. The cause of these unwanted problems is too large pressure damping term compared to the magnitude of face velocity. In this study the magnitude of pressure damping term of Rhie-Chow's method is limited to 1∼10% of face velocity to prevent physically unreasonable solutions. The wall pressure extrapolation which is necessary for cell-centered FVM is another source of numerical errors. Some methods are applied in a unstructured FV solver and analyzed in view of numerical accuracy. Here, two natural convection problems are solved to check the effect of the Rhie-Chow's method on numerical stability. And numerical diffusion from Rhie-Chow's method is studied by solving the inviscid flow around a circular cylinder.

• Korean System Dynamics Review
• /
• v.13 no.3
• /
• pp.47-66
• /
• 2012

This paper aims at investigating and identifying the factor that has led the back and forth relationship between China and the United States since 1989. Previous studies on this subject addressed the issue by taking either of two approaches: one with the micro view that interprets the back and forth relationship in the context of the end of the Cold war, on other hand, with the macro view that interprets the fragile relationship in the context of the rise of China. However, neither of the approaches explains with sufficiency the question at hand. Hence for the inquiry, this article suggests a fresh view by exploring alternative method of using a cognitive map of each nation's leader, Jiangzemin and Bill Clinton. This article provides an empirical analysis through the Selected works of Jiangzemin and the speeches of Bill Clinton in 1998 for the first time in the field of Sino-US relationship studies in Korea. With the results of the cognitive map analysis, we can reach the following four points. Firstly, indicators of the forth relationship between China and the US are: i) the recognition by Bill Clinton on the importance of China's economic growth and; ii) the US's cooperation of science technology with China. Second, the conflict between China and the US results from the discordance of opinions on the matter of human rights and military power. Second, the conflict will inevitably arise on environmental issues around the globe including a global warming. Third, while China has yet to find a legitimate reason to agree upon these issues with the US, the US urges China of its cooperation. Lastly, Both China and the US attach great importance to the alliance with Japan. This implicates that relatively, issues involving Japan take more control in the China-US relationship, than those of Korea Peninsula.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.63-71
• /
• 2003

In sport programs, real-time virtual imaging system come into notice for new technology which can compose information like team logos, scores. distances directly on playing ground, so it can compensate for the defects of general character generator. In order to synchronize graphics to camera movements, generally two method is used. One is for using sensors attached to camera moving axis and the other is for analyzing camera video itself. KBS technical research institute developed real-time sensor-based virtual imaging system 'VIVA', which uses four sensors on pan, tilt, zoom, focus axis and controls virtual graphic camera in three dimensional coordinates in real-time. In this paper, we introduce our system 'VIVA' and it's technology. For accurate camera tracking we calculated view-point movement occurred by zooming based on optical principal point variation data and we considered field of view variation not only by zoom but also by focus. We developed our system based on three dimensional graphic environment. so many useful three dimensional graphic techniques such as keyframe animation can be used. VIVA was successfully used both in Busan Asian Games and 2002 presidential election. We confirmed that it can be used not only in the field but also in the studio programs in which camera is used within more close range.

• Clinics in Shoulder and Elbow
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2005

Purpose: To review the surgical results of stiff elbow using the posterior extensile approach which provides a wide surgical view with a single posterior skin incision. Materials and Methods: From February 1999 to May 2002, we performed 6 surgical correction of stiff elbow using posterior extensile approach and followed the patients more than 1 year. In order to get better result, we performed cadaver study (four elbows of two fresh cadavers). Average duration of follow up was 15.7 months $(14{\sim}21)$. Functional results was analyzed using Brobery and Morrey analysis scale. Results: The approach through the plane between the extensor carpi radialis longus and the extensor carpi radialis brevis was ideal, because it preserves normal anatomy and provides a wide surgical view of the anterior joint. The posterior joint could be approached directly between the medial head of the triceps brachii and brachialis medially, the lateral head of triceps brachii and brachioradialis laterally. In all patients, an improved ROM was obtained with intra and extra-articular adhesiolysis: an average $61.7^{\circ}$ improvement $(50{\sim}75)$. Functional results were as follows: five excellent, one good. In addition, the patients' satisfaction was high since the scar from the operation was only a single line at the posterior surface of the elbow. Conclusion: In the treatment of stiff elbow, posterior extensile approach is thought to be useful because this method provides wide anterior and posterior surgical view.