• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.69-75
• /
• 2000

A new frame synchronization confirmation technique using a pilot pattern of both uplink and downlink channels is proposed for W-CDMA (Wideband Code Division Multiple Access) system. It is shown that by using this technique, we can cancel the side lobe for autocorrelation functions of the frame synchronization words of pilot pattern have the maximum to-of-phase autocorrelation value "4" with two peak values equal in magnitude and opposite in polarity at zero and middle shifts. Due to this side lobe cancellation effect, therefore, the autocorrelation function of the frame synchronization words becomes ideal for the frame synchronization confirmation since double maximum correlation values equal in magnitude and opposite polarity at zero ad middle shifts can be achieved. This property can be used to double check frame synchronization timing and thus. improve the frame synchronization confirmation performance.

• 소음진동
• /
• 제9권3호
• /
• pp.570-576
• /
• 1999

This paper presents numerical and experimental results of modal parameter identification in a generator stator frame for 500 MW fossil power plants. A commercial finite element analysis S/W was employed for modal analysis. The generator is excited by alternating electromagnetic forces, mainly of 120 Hz in 60 Hz machines, due to magnetic field and electric current in windings. It is necessary to verify that the stator frame has adequate frequency margin from the excitation frequency to avoid possible resonance when operating. Thus, frequency margin required for the stator frame is established using the numerical and experimental results. The results show that the stator frame meets the frequency-margin requirements. Also, results of modal analysis for design modification in order to reduce weights of the stator frame without deteriorating vibration characteristics are presented.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.1-12
• /
• 2003

The purpose of this study was to design the method of 3D space calibration to reduce RMSE by statistical analysis when using the DLT algorithm and control frame. Control frame for 3D space calibration was consist of $1{\times}3{\times}2m$ and 162 contort points adhere to it. For calculate of 3D coordination used two methods about 2D coordination on image frame, 2D coordinate on each image frame and mean coordination. The methods of statistical analysis used one-way ANOVA and T-test. Significant level was ${\alpha}=.05$. The compose of methods for reduce RMSE were as follow. 1. Use the control frame composed of 24-44 control points arranged equally. 2. When photographing, locate control frame to center of image plane(image frame) o. use the lens of a few distortion. 3. When calculate of 3D coordination, use mean of 2D coordinate obtainable from all image frames.

• 대한수학회지
• /
• 제53권6호
• /
• pp.1331-1345
• /
• 2016

A K-g-frame is a generalization of a g-frame. It can be used to reconstruct elements from the range of a bounded linear operator K in Hilbert spaces. K-g-frames have a certain advantage compared with g-frames in practical applications. In this paper, the interchangeability of two g-Bessel sequences with respect to a K-g-frame, which is different from a g-frame, is discussed. Several construction methods of K-g-frames are also proposed. Finally, by means of the methods and techniques in frame theory, several results of the stability of K-g-frames are obtained.

• Steel and Composite Structures
• /
• 제50권3호
• /
• pp.337-345
• /
• 2024

This research proposed a particle swarm optimization (PSO) based seismic retrofit design of moment frame structures using a steel frame assembly. Two full scale specimens of the steel frame assembly with different corner details were attached to one-story RC frames for seismic retrofit, and the lateral load resisting capacities of the retrofitted frames subjected to cyclic loads were compared with those of a bare RC frame. The open source software framework Opensees was used to develop an analytical model for validating the experimental results. The developed analytical model and the optimization scheme were applied to a case study structure for economic seismic retrofit design, and its seismic performance was assessed before and after the retrofit. The results show that the developed steel frame assembly was effective in increasing seismic load resisting capability of the structure, and the PSO algorithm could be applied as convenient optimization tool for seismic retrofit design of structures.

• 건축역사연구
• /
• 제25권5호
• /
• pp.51-62
• /
• 2016

Since the recent Hanok boom in Korea, Contemporary Hanok has been evolving in terms of structure, space, form, etc. To get a comprehensive understanding of the diversified Contemporary Hanok, this paper aims at its type classification by analyzing architects' designs since 2000. The criteria for the classification are two: (1) renovation [Re] or new construction [New]; and (2) degree of Contemporary Hanok's deviation from the traditional Hanok's standard - maintaining the traditional form [Main]; changing space within the traditional form [Space]; changing the traditional frame [Frame]; and juxtaposing the traditional and the modern [Combi]. From the two criteria, this paper deduced eight types of Contemporary Hanok, named respectively: Re-Main, New-Main, Re-Space, New-Space, Re-Frame, New-Frame, Re-Combi, and New-Combi, and studied their cases. It can be argued that various aspects of Contemporary Hanok and their critical meanings were well-investigated through this type classification and case-studies.

• 산업공학
• /
• 제18권1호
• /
• pp.82-87
• /
• 2005

Most of virtual reality systems ask users to control 3D objects or to navigate 3D world using 3D controllers. To maximize the human performance in the control, the design of virtual reality system and its input and output devices should be optimized. In this study, an experiment was designed to investigate the effects of three resolution factors of a virtual reality system on the human performance. Six subjects conducted the experiment for the factors; two frame rates, three spatial resolutions, and three pictorial contents. The result showed that the greater the spatial resolution was, the higher the human performance was. For the temporal resolution, fixed frame rate at 18 Hz was better than the varied maximized frame rate. For the pictorial contents, the virtual space with orientation cues marked the greatest performance than the other two conditions; the virtual space without any orientation cue and the virtual space like real world. These results could be applied for the design of virtual reality systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.744-747
• /
• 2004

This paper presents a strength evaluation of a tilling bogie frame for the Korean tilting train, The tilting bogies of the tilting train are subjected to different loading conditions compared with the bogie of the conventional railway vehicles because of the carboloy tilting on curves. We classified the load cases as two categories such as non-tilting case and tilting case. For the two categories. we have carried out structural analysis of the bogie frame to evaluate the strength of the frame. And then, we modified the shape and thickness for the weak areas of the bogie frame to ensure structural safety.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.207-220
• /
• 2013

In this study, the vulnerability of two existing asymmetric steel building frames to Progressive Collapse (PC) is assessed. The buildings have different frame systems, steel sections and number of stories (nine and six). An alternate path method (APM) with a linear static analysis (LS) is carried out according to General Services Administration (GSA) 2003 guidelines. The Demand Capacity Ratio (DCR) of each primary element (beams and columns) is given with its specific details for all frames. The results show that the nine-story building with a dual frame system (moment frame with bracing system) has a lower susceptibility and greater resistance to PC than the six-story building with a simple building frame system (gravity system with bracing system). Implementing built-up box-shaped sections for columns is a better choice than using built-up I-shaped sections because there is no weak axis for the box section.

• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.7-12
• /
• 2004

Inspection and analysis are essential process to determine whether a completed product is in given specification or not. Analysis of products with very complicated shape is difficult to carry out direct comparison between inspected coordinate and designed coordinates. So process called as matching or registrations is needed to solve this problem. By defining error between two coordinates and minimizing the error, registration is done. Registration consists of translation, rotation and scale transformations. Error must be defined to express feature of inspected product. In this paper, registration algorithm is developed to determine pose of sub-frame at assembly with body of automobile by defining error between two coordinates considering geometric feature of sub-frame.