• 산업기술연구
• /
• 제27권A호
• /
• pp.85-94
• /
• 2007

This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

• 한국환경과학회지
• /
• 제17권9호
• /
• pp.957-968
• /
• 2008

The purpose of this study is to analyze the characteristics of hydraulic behavior of the natural channel flow according to the temporal classification mode, and thus propose the hydraulic analysis method for future channel design. For analysis, the temporal flow characteristics of the channel section was divided into the steady flow and the unsteady flow. For hydraulic analysis, the HEC-RAS model, which is a one-dimensional numerical analysis model, and the SMS-RAM2 model, which is a two-dimensional model, were used and the factors used for analysis of hydraulic characteristics were flood elevation and flow rate. The flow state was analyzed on the basis of the one-dimensional steady flow and unsteady flow for review. In the unsteady flow analysis the flow rate changed by $(-)0.16%{\sim}(+)0.26%$, and the flood elevation varied by $(-)0.35%{\sim}(+)0.51%$ as compared to the values in the steady flow analysis. Given these results, in the one-dimensional flow analysis based on the unsteady flow the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow. The flow state was analyzed on the basis of the two-dimensional steady flow and unsteady flow. In the unsteady flow analysis the flow rate varied by $(-)0.16%{\sim}(+)1.08%$, and the flood elevation changed by $(-)0.24%{\sim}(+)0.41%$ as compared to the values in the steady flow analysis. Given these analysis results, in the two dimensional flow analysis based on the unsteady flow, the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow.

• 한국지반공학회논문집
• /
• 제37권4호
• /
• pp.5-17
• /
• 2021

본 논문은 만곡부 제방에 대해 곡률각도, 곡률반경에 따라 3차원 해석을 실시하여 침투특성을 규명하였다. 제방만곡부에서 동수경사는 2차원 해석 결과에 비해 외측제방에서는 감소하였고, 내측제방에서는 증가하였다. 곡률각도와 곡률반경이 작을수록 2차원 해석 대비 동수경사의 변화가 큰 경향을 나타내었으며, 곡률각도보다는 곡률반경이 동수경사에 미치는 영향이 큰 것으로 나타났다. 한계동수경사에 의한 파이핑 안전율 산정결과, 2차원 해석에 대비하여 안전율은 외측제방에서는 2~5%가 증가되었고, 내측제방에서는 4~12%가 감소되었다. 이 감소폭을 고려해 볼 때 제방만곡부에 대해 2차원 해석을 실시하고 파이핑에 대한 허용안전율 Fs=2.0보다 0.1~0.3정도 더 크게 설계하면 만곡부의 안전율은 약간 감소되지만 안정성 확보에는 무리가 없는 것으로 판단되었다.

• Coupled systems mechanics
• /
• 제8권4호
• /
• pp.339-350
• /
• 2019

A numerical simulation of the incompressible multiphase hydraulic jump flow was performed to compare the interface prediction through the use of the three RANS turbulence models: $k-{\varepsilon}$, $RNGk-{\varepsilon}$ and SST $k-{\omega}$. A three dimensional no submerged hydraulic jump and a two dimensional submerged hydraulic jump were modeled. Both the geometry and the mesh were created using the open source Gmsh code. The project's geometry consists of a rectangular channel with length and height differences between the two dimensional and three dimensional simulations. Uniform hexahedral cells were used for the mesh. Three refining meshes were constructed to allow to verify simulation convergence. The Volume of Fluid (abbr. VOF) method was used for treatment of the air-water surface. The turbulence models were evaluated in three distinct set up configurations to provide a greater accuracy in the flow representation. In the two-dimensional analysis of a submerged hydraulic jump simulation, the turbulence model RNG RNG $k-{\varepsilon}$ provided a better interface adjust with the experimental results than the model $k-{\varepsilon}$ and SST $k-{\omega}$. In the three-dimensional simulation of a no-submerged hydraulic jump the k-# showed better results than the SST $k-{\omega}$ and RNG $k-{\varepsilon}$ capturing the height and length of the ledge with a better fit with the experimental results.

• 한국습지학회지
• /
• 제15권1호
• /
• pp.91-103
• /
• 2013

본 연구에서는 자연친화적인 호안 블록의 현장 적용시 충분한 기술적인 검증과 구조적, 수리학적 안정성 검토 등이 제대로 이루어지지 않고 있는 문제점을 개선하기 위해 생태적 기능을 확보할 수 있는 식생강화를 위한 다공성 소일 블록에 대하여 수리적 거동 변화에 따른 수리학적 안정성을 검토하였다. 대상구간을 선정하여 수치해석 및 수리모형실험을 실시하였으며 수치해석을 위해 1차원 수치해석모형인 HEC-RAS와 2차원 수치해석모형인 RMA-2를 이용하여 1, 2차원 수치해석을 실시하였고, Froude 상사법칙을 적용하여 식생 유, 무에 따른 축척된 수리모형실험을 실시하였다. 수리모형실험의 경우 실험결과에 대한 타당성을 위해 축척된 수리모형실험의 유속 및 소류력 결과를 원형으로 환산하여 1, 2차원 수치해석결과와 동일한 조건하에 비교 검토하였고 그 결과 비교적 일치된 결과가 나타난 것으로 확인되었으며 이에 따른 원형으로 환산된 소류력 결과를 기존 연구결과인 호안의 허용소류력과 비교함으로써 블록의 수리학적 안정성을 제시하였다.

• Ecology and Resilient Infrastructure
• /
• 제3권4호
• /
• pp.307-314
• /
• 2016

최근 하천복원 사업은 과거 인공적인 부분을 개선하는 범위를 벗어나 격리차단된 구하도까지 복원하는 수준에 이르렀다. 구하도 복원은 하천 제방과 같은 종적 구조물에 의해 차단된 공간의 수리적 연결성 회복이 중요하다. 그러나 하천복원이 적절히 수행되었는지 관한 평가방법이 부족한 상황이기에 본 연구에서는 대상하천에서의 생태적 연결성 평가를 위한 수단을 제공하고자 한다. 이 연구에서 강우에 의한 유역유출 및 하도흐름 해석이 동시에 가능한 1차원 수치모형을 개발하여 청미천 유역에 적용한 바 있다. 특히 이 연구에서 1차원의 홍수추적 결과를 2차원의 공간분포로 변환시키고 시간에 따른 2차원의 수리특성으로부터 서식처적합도까지 산출하여 연결성 회복정도를 평가하는 수치모형을 개발하였으며, 이를 청미천 구하도 복원지역에 적용하였다. 복잡할 뿐만아니라 시간도 많이 소요되는 2차원의 분석을 수행하지 않고서도 1차원 수리특성 결과를 확장해서 2차원 수리특성을 쉽게 구할 수 있도록 한 것이 본 연구의 특징이다. 본 연구의 결과를 이용하면 구간별 대상종별 서식처적합도를 용이하게 산정할 수 있다.

• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.344-363
• /
• 1999

A multi-dimensional thermal-hydraulic system analysis code, MARS 1.3.1, has been developed in order to have the realistic analysis capability of two-phase thermal-hydraulic transients for pressurized water reactor (PWR) plants. As the backbones for the MARS code, the RELAP5/MOD3.2.1.2 and COBRA-TF codes were adopted in order to take advantages of the very general, versatile features of RELAP5 and the realistic three-dimensional hydrodynamic module of COBRA-TF. In the MARS code, all the functional modules of the two codes were unified into a single code first. Then, the source codes were converted into the standard Fortran 90, and then they were restructured using a modular data structure based on "derived type variables" and a new "dynamic memory allocation" scheme. In addition, the Windows features were implemented to improve user friendliness. This paper presents the developmental work of the MARS version 1.3.1 including the hydrodynamic model unification, the heat structure coupling, the code restructuring and modernization, and their verifications.their verifications.

• Nuclear Engineering and Technology
• /
• 제41권10호
• /
• pp.1347-1360
• /
• 2009

A multi-dimensional component for the thermal-hydraulic system analysis code, MARS, was developed for a more realistic three-dimensional analysis of nuclear systems. A three-dimensional and two-fluid model for a two-phase flow in Cartesian and cylindrical coordinates was employed. The governing equations and physical constitutive relationships were extended from those of a one-dimensional version. The numerical solution method adopted a semi-implicit and finite-difference method based on a staggered-grid mesh and a donor-cell scheme. The relevant length scale was very coarse compared to commercial computational fluid dynamics tools. Thus a simple Prandtl's mixing length turbulence model was applied to interpret the turbulent induced momentum and energy diffusivity. Non drag interfacial forces were not considered as in the general nuclear system codes. Several conceptual cases with analytic solutions were chosen and analyzed to assess the fundamental terms. RPI air-water and UPTF 7 tests were simulated and compared to the experimental data. The simulation results for the RPI air-water two-phase flow experiment showed good agreement with the measured void fraction. The simulation results for the UPTF downcomer test 7 were compared to the experiment data and the results from other multi-dimensional system codes for the ECC delivery flow.

• 산업기술연구
• /
• 제26권A호
• /
• pp.129-137
• /
• 2006

In this research, we made a one and two-dimensional analysis of numerical data collected from the bend curvature of a bended river section. According to the result from the numerical analysis, the inflow ＆ output angle caused a water level deviation which increased with an increase of the flood discharge. From the water level deviation of our two-dimensional numerical model, we obtained the maximum slope of 6,67% when the inflow and output angle was 105 degrees and the flood discharge was 500 CMS. As for the right side, the differences with the one-dimensional numerical model were reduced when the angle was more than $90^{\circ}$. As for the left side the differences were reduced when the angle was more than $105^{\circ}$. For a river with more than 90 degrees bend curvature, a hydraulic experiment would be more appropriate than a numerical analysis.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1495-1507
• /
• 2022

The improvement of thermal-hydraulic analysis techniques is essential to ensure the safety and reliability of nuclear power plants. The one-dimensional two-fluid model has been adopted in state-of-the-art thermal-hydraulic system codes. Current constitutive equations used in the system codes reach a mature level. Some exceptions are the partition method of wall friction in the momentum equation of the two-fluid model and the interfacial drag force model for a horizontal two-phase flow. This study is focused on deriving the partition method of wall friction in the momentum equation of the two-fluid model and modeling the interfacial drag force model for a horizontal bubbly flow. The one-dimensional momentum equation in the two-fluid model is derived from the local momentum equation. The derived one-dimensional momentum equation demonstrates that total wall friction should be apportioned to gas and liquid phases based on the phasic volume fraction, which is the same as that used in the SPACE code. The constitutive equations for the interfacial drag force are also identified. Based on the assessments, the Rassame-Hibiki correlation, Hibiki-Ishii correlation, Ishii-Zuber correlation, and Rassame-Hibiki correlation are recommended for computing the distribution parameter, interfacial area concentration, drag coefficient, and relative velocity covariance of a horizontal bubbly flow, respectively.