• Ecology and Resilient Infrastructure
• /
• 제3권4호
• /
• pp.307-314
• /
• 2016

최근 하천복원 사업은 과거 인공적인 부분을 개선하는 범위를 벗어나 격리차단된 구하도까지 복원하는 수준에 이르렀다. 구하도 복원은 하천 제방과 같은 종적 구조물에 의해 차단된 공간의 수리적 연결성 회복이 중요하다. 그러나 하천복원이 적절히 수행되었는지 관한 평가방법이 부족한 상황이기에 본 연구에서는 대상하천에서의 생태적 연결성 평가를 위한 수단을 제공하고자 한다. 이 연구에서 강우에 의한 유역유출 및 하도흐름 해석이 동시에 가능한 1차원 수치모형을 개발하여 청미천 유역에 적용한 바 있다. 특히 이 연구에서 1차원의 홍수추적 결과를 2차원의 공간분포로 변환시키고 시간에 따른 2차원의 수리특성으로부터 서식처적합도까지 산출하여 연결성 회복정도를 평가하는 수치모형을 개발하였으며, 이를 청미천 구하도 복원지역에 적용하였다. 복잡할 뿐만아니라 시간도 많이 소요되는 2차원의 분석을 수행하지 않고서도 1차원 수리특성 결과를 확장해서 2차원 수리특성을 쉽게 구할 수 있도록 한 것이 본 연구의 특징이다. 본 연구의 결과를 이용하면 구간별 대상종별 서식처적합도를 용이하게 산정할 수 있다.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.495-505
• /
• 2009

A two-dimensional circular cylinder freely falling in a channel has been simulated by using immersed boundary - lattice Boltzmann method (IB-LBM) in order to analyze the characteristics of motion originated by the interaction between the fluid flow and the cylinder. The wide range of the solid/fluid density ratio has been considered to identify the effect of the solid/fluid density ratio on the motion characteristics such as the falling time, the transverse force and the trajectory in the streamwise and transverse directions. In addition, the effect of the gap between the cylinder and the wall on the motion of a two-dimensional freely falling circular cylinder has been revealed by taking into account a various range of the gap size. As the cylinder is close to the wall at the initial dropping position, vortex shedding in the wake occurs early since the shear flow formed in the spacing between the cylinder and the wall drives flow instabilities from the initial stage of freely falling. In order to consider the characteristics of transverse motion of the cylinder in the initial stage of freely falling, quantitative information about the cylinder motion variables such as the transverse force, trajectory and settling time has been investigate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권4호
• /
• pp.287-298
• /
• 2007

A two-dimensional treatment of the potential distribution under the depletion approximation is presented for poly-crystalline silicon thin film transistors. Green's function approach is adopted to solve the two-dimensional Poisson's equation. The solution for the potential distribution is derived using Neumann's boundary condition at the silicon-silicon di-oxide interface. The developed model gives insight into device behavior due to the effects of traps and grain-boundaries. Also short-channel effects and drain induced barrier lowering effects are incorporated in the model. The potential distribution and electric field variation with various device parameters is shown. An analysis of threshold voltage is also presented. The results obtained show good agreement with simulated results and numerical modeling based on the finite difference method, thus demonstrating the validity of our model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2489-2494
• /
• 2008

The two-dimensional circular cylinder freely falling in a channel has been simulated by using Immersed boundary - lattice Boltzmann method in order to analyze the characteristics of motion originated by the interaction between the fluid and the solid. The wide range of the solid/fluid density ratio has been considered to identify the effect of the solid/fluid density ratio on the motion characteristics such as the falling time, the terminal velocity and the trajectory in the vertical and horizontal directions. In addition, the effect of the gap between the cylinder and the wall on the motion of two-dimensional circular cylinder freely falling has been revealed by taking into account a various range of the gap size. The Reynolds number in terms of the terminal velocity is diminished as the cylinder becomes close to the wall at the initial dropping position, since the repulsive force induced between the cylinder and wall constrains the vertical motion. Quantitative information about the flow variables such as the pressure coefficient and vorticity on the cylinders is highlighted.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.409-413
• /
• 2005

Even though the relative importance of length scale of flow system allow us to simplify three dimensional flow problem to one or two dimensional representation, many systems still require three dimensional analysis. The objective of this study is to develop an efficient and accurate finite element model for analyzing and predicting three dimensional flow features in natural rivers and to offend to model spreading of pollutants and transport of sediments in the future. Firstly, three dimensional Reynolds averaged Navier-Stokes equations with the hydrostatic pressure assumption in generalized curvilinear coordinates were combined with the kinematic free-surface condition. Secondly. to simulate realistic high Reynolds number flow, the model employed the Streamline Upwind/Petrov-Galerkin(SU/PG) scheme as a weighting function for the finite element method in conjunction with an appropriate turbulence model(Smagorinsky scheme for the horizontal plain and Mellor-Yamada scheme for the vertical direction). Several tests is performed for the purpose of validation and verification of the developed model. A simple rectangular channel, 5-shaped and U-shaped channel are used for tests and comparisons are made with RMA-10 model. Runs for each case is converged stably without a oscillation and calculated water-surface deformation, longitudinal and transversal velocities, and velocity vector fields are in good agreement with the results of RMA-10 model.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.396-405
• /
• 2006

The visual analysis of buried channel (Be) devices such as buried channel MOSFETs and CCDs (Charge Coupled Devices) is investigated to give better understanding and insight for their electrical behaviours using a 3-dimensional (3-D) numerical simulation. This paper clearly demonstrates the capability of the numerical simulation of 'EVEREST' for characterising the analysis of a depletion mode MOSFET and BC CCD, which is a simulation software package of the semiconductor device. The inverse threshold and punch-through voltages obtained from the simulations showed an excellent agreement with those from the measurement involving errors of within approximately 1.8% and 6%, respectively, leading to the channel implanted doping profile of only approximately $4{\sim}5%$ error. For simulation of a buried channel CCD an advanced adaptive discretising technique was used to provide more accurate analysis for the potential barrier height between two channels and depletion depth of a deep depletion CCD, thereby reducing the CPU running time and computer storage requirements. The simulated result for the depletion depth also showed good agreement with the measurement. Thus, the results obtained from this simulation can be employed as the input data of a circuit simulator.

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.277-280
• /
• 2006

Rapid and highly sensitive determination of nicotine in a PDMS microfluidic channel was investigated using surface enhanced Raman spectroscopy (SERS). A three-dimensional PDMS microfluidic channel was fabricated for this purpose. This channel shows a high mixing efficiency because the transverse and vertical dispersions of the fluid occur simultaneously through the upper and lower zig zag-type blocks. A higher efficiency of mixing could also be obtained by splitting each of the confluent streams into two sub-streams that then joined and recombined. The SERS signal was measured after nicotine molecules were effectively adsorbed onto silver nanoparticles by passing through the three-dimensional channel. A quantitative analysis of nicotine was performed based on the measured peak area at 1030 $cm^{-1}$. The detection limit was estimated to be below 0.1 ppm. In this work, the SERS detection, in combination with a PDMS microfluidic channel, has been applied to the quantitative analysis of nicotine in aqueous solution. Compared to the other conventional analytical methods, the detection sensitivity was enhanced up to several orders of magnitude.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1190-1196
• /
• 2016

We propose a new bandpass filter (BPF)-based online channel normalization method to dynamically suppress channel distortion when the speech and channel noise components are unknown. In this method, an adaptive modulation frequency filter is used to perform channel normalization, whereas conventional modulation filtering methods apply the same filter form to each utterance. In this paper, we only normalize the two mel frequency cepstral coefficients (C0 and C1) with large dynamic ranges; the computational complexity is thus decreased, and channel normalization accuracy is improved. Additionally, to update the filter weights dynamically, we normalize the learning rates using the dimensional power of each frame. Our speech recognition experiments using the proposed BPF-based blind channel normalization method show that this approach effectively removes channel distortion and results in only a minor decline in accuracy when online channel normalization processing is used instead of batch processing

• 대한전자공학회논문지
• /
• 제25권11호
• /
• pp.1373-1379
• /
• 1988

본 연구에서는 FDM(finite difference method)을 이용한 수치적 방법을 사용하여 MODFET (MO-dulation doped FET)의 전위 분포와 전자 밀도를 이차원적으로 해석하였다. 일차원적 해석 방법에서는 MODFET의 게이트 부분만을 계산하는 반면, 이차원적 해석 방법은 소오스와 드레인 부분도 계산해줌으로써 일차원적 해석 방법에서 무시되는 기생 효과(parasitic effect)를 고려하여 더 정확한 해석이 가능하였다. 결과로서 스페이스(spacer) 두께와 (n)AlGaAs층의 도핑 농도의 변화에 따른 채널내에서 2DEG(2dimensional electron gas)의 단위 면적에 대한 밀도와의 관계를 정량적으로 제시하였으며 스페이서의 두께가 작아지거나 (n)AlGaAs 층의 도핑 농도가 커질수록 MODFET 채널 내의 전자 밀도가 증가함을 확인하였다.

• 한국수자원학회논문집
• /
• 제48권8호
• /
• pp.635-645
• /
• 2015

본 연구에서는 하도 내 수제 형 수리구조물을 설치하였을 때, 만곡수로와 수충부에서의 흐름 양상 변화를 3차원 유속 측정을 통해 확인하였다. 연구를 위해 길이 24.4m, 폭 1.5m, 하상경사 2%의 만곡수로에서 실험을 수행하였다. 실험은 단일 수제의 설치 여부에 따라 크게 두 가지 경우로 나누어 수행하였다. 유속의 측정에는 3차원 초음파 유속계(Acoustic Doppler velocimeter, ADV)를 사용하였으며 각 단면 당 약60개의 측점을 선정하여 일정한 시간 동안 측정하였다. 측정된 유속들은 시간 평균하였으며, 각 단면에서의 측정결과를 연결하여 만곡수로의 수면유속을 파악하였다. 그 결과, 수제설치로 인해 구조물 하류에 위치한 만곡부 외측에서의 유속이 현저하게 감소하였고 제방을 향했던 흐름의 방향이 내측으로 변화하였음을 확인할 수 있었다.