• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.221-226
• /
• 2008

A new two dimensional (2-D) analytical model for the Threshold Voltage on dual material surrounding gate (DMSG) MOSFETs is presented in this paper. The parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions. The simple and accurate analytical expression for the threshold voltage and sub-threshold swing is derived. It is seen that short channel effects (SCEs) in this structure is suppressed because of the perceivable step in the surface potential which screens the drain potential. We demonstrate that the proposed model exhibits significantly reduced SCEs, thus make it a more reliable device configuration for high speed wireless communication than the conventional single material surrounding gate (SMSG) MOSFETs.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3067-3072
• /
• 2008

A two-dimensional model for anode-supported IT-SOFCs is proposed in order to accurately consider the heat and mass transport processes with a fully-developed axial velocity profile in channel flow. A comprehensive micro model is employed to describe the electrochemical reaction in anode and cathode of SOFCs. This paper investigates the effects of operational parameters (inlet temperature, the amount of flow rate, and air flow rate) including flow configurations (co-flow and counter-flow) on the current density and temperature distributions in the IT-SOFCs.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.215-219
• /
• 2012

This paper applies transmit antenna selection algorithms to spatial-temporal combining-based spatial multiplexing (SM) ultra-wideband (UWB) systems. The employed criterion is based on the largest minimum output signal-to-noise ratio of the multiplexed streams. It is shown via simulations that the bit error rate (BER) performance of the SM UWB systems based on the two-dimensional Rake receiver is significantly improved by antenna diversity through transmit antenna selection on a log-normal multipath fading channel. When the transmit antenna diversity through antenna selection is exploited in the SM UWB systems, the BER performance of the spatial-temporal combining-based zero-forcing (ZF) receiver is also compared with that of the ZF detector followed by the Rake receiver.

• International Journal of Automotive Technology
• /
• v.8 no.5
• /
• pp.563-573
• /
• 2007

Optimal design of an automotive catalytic converter for minimization of cold-start emissions is numerically performed using a micro genetic algorithm for two optimization problems: optimal geometry design of the monolith for various operating conditions and optimal axial catalyst distribution. The optimal design process considered in this study consists of three modules: analysis, optimization, and control. The analysis module is used to evaluate the objective functions with a one-dimensional single channel model and the Romberg integration method. It obtains new design variables from the control module, produces the CO cumulative emissions and the integral value of a catalyst distribution function over the monolith volume, and provides objective function values to the control module. The optimal design variables for minimizing the objective functions are determined by the optimization module using a micro genetic algorithm. The control module manages the optimal design process that mainly takes place in both the analysis and optimization modules.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.655-661
• /
• 2014

In this paper, a new two dimensional (2D) analytical modeling and simulation for a surrounding gate tunnel field effect transistor (TFET) is proposed. The Parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions and analytical expressions for surface potential and electric field are derived. This electric field distribution is further used to calculate the tunneling generation rate and thus we numerically extract the tunneling current. The results show a significant improvement in on-current characteristics while short channel effects are greatly reduced. Effectiveness of the proposed model has been confirmed by comparing the analytical results with the TCAD simulation results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.3
• /
• pp.1015-1027
• /
• 1996

In this paper, a numerical procedure for the calculation of the incompressible Navier-Stokes equations in a generalized nonorthogonal body fitted coordinate system is proposed and is validated through three test problems. Present numerical procedure derives the pressure equation by using the pressure substitution method on the regular grid system, and discretized momentum equations are based on the covariant velocity components. Cavity flow, backward facing step flow, and two dimensional channel flow with a sinusoidal wavy wall are chosen as three test problems. Numerical solutions obtained by present procedure shows a good agreement with previous numerical and/or experimental results. Convergence rate is also satisfactory.

• Journal of Korea Multimedia Society
• /
• v.22 no.4
• /
• pp.424-431
• /
• 2019

In this paper, we propose a real-time hand gesture recognition algorithm to eliminate the inconvenience of using hand controllers in VR applications. The user's 3D hand coordinate information is detected by leap motion sensor and then the coordinates are generated into two dimensional image. We classify hand gestures in real-time by learning the imaged 3D hand coordinate information through SSD(Single Shot multibox Detector) model which is one of CNN(Convolutional Neural Networks) models. We propose to use all 3 channels rather than only one channel. A sliding window technique is also proposed to recognize the gesture in real time when the user actually makes a gesture. An experiment was conducted to measure the recognition rate and learning performance of the proposed model. Our proposed model showed 99.88% recognition accuracy and showed higher usability than the existing algorithm.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.118-123
• /
• 2023

Partially magnetized capacitively coupled plasma (CCP) sources are investigated using a two-dimensional kinetic simulation code named EDIPIC-2D. A converging numerical solution was obtained for CCP with a 60 MHz power source, while properly capturing the dynamics of electrons and power absorption over a single RF period. The effects of magnetic fields with different orientations were evaluated. Axial magnetic fields caused changes in the spatial distribution of plasma density, affecting the loss channel. Transverse magnetic fields enhanced stochastic heating near the powered electrode, leading to an increase in plasma density while the significant E×B drift loss compensated for this rise.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.445-452
• /
• 1987

In this paper, a model for characteristics in the AlxGa1-xAs layer of MODFET's is presented. The characteristics of conduction band in the AlxGa1-xAs layer is analyzed with the Fermi-Dirac statistics. And using the conduction band energy which is calculated with the numerical calculation method (false-Positon method), the variations of the electric-field distribution, the ionized donor concentration, and the two-dimensional electron gas density with gate voltage are calculated, respectively. The channel formation process for the parasitic MESFET operation in the MOD structure is also analyzed, and the characteristics in the AlxGa1-xAs layer is analytically modeled. The throretical results describe well the general characteristics in the MOD structure.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.279-290
• /
• 1998

The height and speed of the shock wave are critical data in flood-control operations or in the design of channel walls and bridges along rivers with high flow velocities. Therefore, a numerical model is needed for simulating flow discontinuity over a wide range of conditions. In this study, a governing equation. As a Riemann solver Roe(1981)'s one is used. The model employs the modified MUSCL for handling the unstructured grids in this research. this model that adopts the explicit tradditional twl dimmensional dam break problems, two hydraulic dam break model is simulations, and a steady state simulation in a curved channel. Conclusions of this research are as follows : 1) the finite volume method can be combined with the Godonov-type method that is useful for modeling shocks. Hence, the finite volume method is suitable for modeling shocks. 2) The finite volume model combined with the modified MUSCL is successful in modeling shock. Therefore, modified MUSCL is proved to be valid.