• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.270-272
• /
• 2003

Switching power supplies are widely used in many industrial fields. Power factor correction(PFC) circuits have tendency to be applied in new power supply designs. The input active power factor correction(APFC) circuits can be implemented using either the two-stage approach or the single-stage approach. The single-stage PFC circuit has advantage to reduce the number of components by eliminating a need for the PFC switch and control circuit. However, unlike in the two-stage approach, the do voltage on the energy storage capacitor in a single-stage PFC circuit is not well regulated. As a result. in universal line application($90{\sim}265Vac$), the storage capacitor voltage varies with the load and line variation. In this paper, the performance of output voltage regulation and transient response are clarified here. The validity of designed boost PFC circuit is confirmed by MATLAB simulation and experimental results of 2 [kW] prototype converter.

• 대기
• /
• 제25권3호
• /
• pp.511-520
• /
• 2015

Existing studies on radar rainfall uncertainties were performed to reduce the uncertainty for each stage by using bias correction during the quantitative radar rainfall estimation process. However, the studies do not provide quantitative comparison with the uncertainties for all stages. Consequently, this study proposes a suitable approach that can quantify the uncertainties at each stage of the quantitative radar rainfall estimation process. First, the new approach can present initial and final uncertainties, increasing or decreasing the uncertainty, and the uncertainty percentage at each stage. Furthermore, Maximum Entropy (ME) was applied to quantify the uncertainty in the entire process. Second, for the uncertainty quantification of radar rainfall estimation at each stage, this study used two quality control algorithms, two rainfall estimation relations, and two bias correction techniques as post-processing and progressed through all stages of the radar rainfall estimation. For the proposed approach, the final uncertainty (ME = 3.81) from the ME of the bias correction stage was the smallest while the uncertainty of the rainfall estimation stage was higher because of the use of an unsuitable relation. Additionally, the ME of the quality control was at 4.28 (112.34%), while that of the rainfall estimation was at 4.53 (118.90%), and that of the bias correction at 3.81 (100%). However, this study also determined that selecting the appropriate method for each stage would gradually reduce the uncertainty at each stage. Finally, the uncertainty due to natural variability was 93.70% of the final uncertainty. Thus, the results indicate that this new approach can contribute significantly to the field of uncertainty estimation and help with estimating more accurate radar rainfall.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.454-457
• /
• 1996

In this paper, a two-stage and top-down approach of mid-term and long-term R&D planning of public corporation is proposed to incorporate some characteristics of public corporation and to overcome the complexity of the real world planning. Unlikely to R&D planning of private company, the total investiment size of public corporation is institutionally determined. A top-down approach is developed to adopt this feature. The proposed approach has two stages to overcome the complexity. In the first stage, we develop a plan for R&D area by adopting the business area and the public role of corporation. In the second stage, we develop the detailed plan within each area. The proposed approach is applied to develop the mid-term and long-term R&D plan of Korea Gas Corporation.

• 품질경영학회지
• /
• 제13권2호
• /
• pp.29-36
• /
• 1985

The problem of selecting the gamma population with the largest mean out of k gamma populations, each of which has the same shape parameter is considered. An elimination type two-stage procedure is proposed which guarantees the same probability requirement using the indifference-zone approach as does the single-stage procedure of Gibbons, Olkin and Sobel (1977). The two-stage procedure has the highly desirable property that the expected total number of observations required by the procedure is always less than that of the corresponding single-stage procedure regardless of the configuration of the population parameters.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.490-497
• /
• 2020

본 연구는 순환잔골재의 사용 촉진을 위한 궁극의 해결방안 중 하나인 구조용 콘크리트의 골재로 사용될 수 있는 가능성을 확인하기 위하여 진행되었다. 순환잔골재의 함수상태 변화에 따라, 2단계 배합방법 및 변형된 형태의 2단계 배합방법을 적용한 모르타르의 강도가 세척사로 제조된 일반배합 모르타르의 강도에 근접하는지를 확인하여, 2단계 배합의 활용성을 증명하고자 하였다. 본 연구의 결과에 따르면, 골재의 함수상태에 의한 영향은 물시멘트비 0.3인 경우에만 발현되었고, 물시멘트비 0.5인 경우에는 명확한 경향을 찾을 수 없었으나, 2단계 배합방법이 순환잔골재 혼입 모르타르의 강도증진에 기여할 수 있는 가능성은 확인하였다. 또한 기존의 2단계 배합방법에 비해 시멘트 페이스트를 먼저 배합한 후, 순환잔골재를 투입한 변형된 형태의 2단계 배합방법을 활용하는 것이 순환잔골재 혼입 모르타르의 강도발현에 더욱 효과적인 것으로 나타났다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권4호
• /
• pp.353-360
• /
• 2007

In a one-stage approach, where the implant installation is performed simultaneously with the iliac bone graft, various complications are observed. The observed complications are as follows; severe bone resorption at the maxillary anterior region and the area adjacent to the nasal cavity, shortage of soft tissue to cover the augmented alveolar bone, difficulties with oral hygiene care caused by the diminished vestibular space and non-esthetic prosthesis. These are good reasons for choosing the two-stage approach over the one-stage approach in spite of all the advantages it has, and should be taken into careful consideration when diagnosing and planning treatment using the one-stage approach.

• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.77-83
• /
• 2022

In this paper, the two-stage object detection approach is proposed to implement a deep learning-based label inspection system on edge computing environments. Since the label printed on the products during the production process contains important information related to the product, it is significantly to check the label information is correct. The proposed system uses the lightweight deep learning model that able to employ in the low-performance edge computing devices, and the two-stage object detection approach is applied to compensate for the low accuracy relatively. The proposed Two-Stage object detection approach consists of two object detection networks, Label Area Detection Network and Character Detection Network. Label Area Detection Network finds the label area in the product image, and Character Detection Network detects the words in the label area. Using this approach, we can detect characters precise even with a lightweight deep learning models. The SF-YOLO model applied in the proposed system is the YOLO-based lightweight object detection network designed for edge computing devices. This model showed up to 2 times faster processing time and a considerable improvement in accuracy, compared to other YOLO-based lightweight models such as YOLOv3-tiny and YOLOv4-tiny. Also since the amount of computation is low, it can be easily applied in edge computing environments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.252-257
• /
• 1998

Two-stage power factor correction (PFC) converter with a single PWM controller for universal input voltage (90-264V) is proposed. It consists of a power factor pre-regulator cascaded by a DC/DC converter as in a conventional two-stage approach. However, a single PWM controller is used as in a single-stage, single-switch PFC approach. The switch in the PFC part is synchronized with the switch in the DC/DC converter with a fixed switching frequency. Employing an adaptive delay scheme the switch in the PFC part is controlled to limit the energy storage capacitor voltage within a designed range for the optimum efficiency, and to reduce input current harmonic distortion. The experimental results obtained on a 200W (5V/40A) prototype PFC converter are given to verify the effectiveness of the proposed control method.

• 소성∙가공
• /
• 제17권3호
• /
• pp.155-160
• /
• 2008

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric or involve several axisymmetric processes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.195-200
• /
• 2007

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric.