• Journal of East-West Nursing Research
• /
• v.1 no.1
• /
• pp.82-98
• /
• 1997

The purpose of this study was to determine pattern of the stress perceived by stroke patients over time. The ultimate goal of the research is to provide data to help nurses to design the plan of nursing care of the stroke patients both in the hospital and at home. A total of 57 admitted stroke patients were collected from one general hospital in Seoul from June, 12 to September, la, 1993. The data were collected for three phases(within one week after leaving the hospital). The tools for this study, three scales were used ; Stress scale developed by the investigator. Constitution classifing scale designed by Kho(1984), and Self-care measuring scale by Kang(1984). Data were analyzed in four steps using statistical analysis. First, demographic data were determined by descriptive statistics. Second. the pattern of stress perceived by stroke patients across three phases was measured using repeated measures ANOVA. Third, stress of stroke patients classified by constitution, paralyzed area. and attack frequency were measured using ANOVA or t-test, and the pattern of stress by group over time was determined using paired t-test in post hoc test. Fourth. Pearson correlation coefficients were calculated to determine the relationship between the stress and self-care activities. The results of this study are ; 1. The pattern of stress across three phases ; There was a decrease of the stress across three phases. In general. psychological stress as the highest among three phases(F=36.92. P=.000). There was a statistically significant difference of the physical stress(F=34.55, p=.000), the psychological stress (F=15.49, p=.0005) and the social stress (F=24.71. p=.000) among three phases. There was a statistically significant difference of the stress between the first phase (on admission) and the second phase(before leaving the hospital) and was a decrease of the stress (t =6.36. p=.000). 2. The pattern of stress of stroke patients classified by constitution across three phases ; Stroke patients classified as So-Eum perceived the highest stress among three groups(Tae-Eum, So-Eum. So-Yang). There was no statistically significant difference of stress according to the constitution of stroke patients among three phases. Hence. stress was not influenced by the constitution of stroke patients, but there was a statistically significant difference of stress over time. 3. The pattern of stress of stroke patients classified by the paralyzed area across three phases ; Right paralyzed stroke patients perceived higher stress than left paralyzed stroke patients. There was, however, no statistically significant difference of stress between two groups except 2nd phase. There was no statistically significant difference of the perception of stress bet ween the right and left paralyzed stroke patients. 4. The pattern of stress of stroke patients classified by the frequency of the relapse of the disease across three phases ; Stress was higher in stroke patients who had the relapse of the disease twice more than the first time. There was, however, no statistically significant difference of stress between two groups. There was no statistically significant difference of stress of stroke patients according to the relapse of the disease among three phases. Hence, stress was no influenced by the relapse of the disease. 5. The relationship between the stress and self-care activities ; There was a negative relationship between the stress and self-care activities each phase(on admission, r= -.1563 ; before leaving the hospital, r= -.4030 ; after leaving the hospital, r= -.5291). Hence, the higher the self-care activities, the lower the stress. This study has three important findings. First finding was that psychological stress perceived by stroke patients was the highest among three phases. The second finding was that factors such as the constitution, the paralyzed area, and the relapse of the disease did not have an influence on the stress perceived by stroke patients across three phases(on admission, before leaving the hospital, after leaving the hospital). There was a statistically significant decrease of the stress perceived by stroke patients across three phases. The third finding was that there was a negative relationship between the self-care ability and stress. In this study, these findings have implications for nursing care for the rehabilitation of stroke patients and suggest the need of nursing intervention to promote the self-care ability and to support the psychological self-esteem of stroke patients.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.3
• /
• pp.97-103
• /
• 2018

The objective of this study is to develop the mechanical properties of AlSiCu aluminum alloy by the two-step solution heat treatment. The microstructure of gravity casting specimen represents a typical dendrite structure having a secondary dendrite arm spacing (SDAS) of 40 mm. In addition to the Al matrix, a large amount of coarsen eutectic Si phase, $Al_2Cu$ intermetallic phase, and Fe-rich phases are generated. The eutectic Si phases are fragmented and globularized with solution heat treatment. Also, the $Al_2Cu$ intermetallic phase is resolutionized into the Al matrix. The $2^{nd}$ solution temperature at $525^{\circ}C$ might be a optimum condition for enhancement of mechanical properties of AlSiCu aluminum alloy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.3
• /
• pp.178-185
• /
• 2009

Simple and highly efficient droplet merging method is proposed, which enables two nanoliter or picoliter droplets to merge regularly in a straight microchannel. Using a cross channel with inflows of one oil phase through the main channel and two water phases through the side channels, two droplets of different sizes can be generated alternatingly in accordance with flow rate difference of the water phases. It is shown that for a fixed oil phase flow rate, the flow rate of one water phase required for alternating droplet generation increases linearly with the flow rate of another water phase. By this method, the droplets are merged with 100 % efficiency without any additional driving forces.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.389-392
• /
• 2002

In many industrial applications, multiphase flow analysis is the norm rather than an exception as compared to more-conventional single-phase investigation. This paper describes the implementation of the multiphase flow simulation capability in the general purpose CFD software AVL FIRE/SWIFT. The governing equations are discretized based on a finite volume method (FVM) suitable fur very complex geometry, The pressure field is obtained using the SIMPLE algorithm. Depending on the characteristics of the multiphase flow to be examined, the user can choose either the two-fluid model or an explicit interface-tracking model based on the Volume-of-Fluid approach. For truly 'multi'-phase flow problems, it is also possible to apply a hybrid model where certain phases are explicitly tracked while the other phases are handled by the two fluid model. In order to demonstrate the capability of the method, applications to the Taylor bubble flow simulations are presented.

• ETRI Journal
• /
• v.18 no.3
• /
• pp.147-160
• /
• 1996

We investigate noise-induced phase transitions in globally coupled active rotators with multiplicative and additive noises. In the system there are four phases, stationary one-cluster, stationary two-cluster, moving one-cluster, and moving two-cluster phases. It is shown that multiplicative noise induces a bifurcation from one-cluster phase to two-cluster phase. Pinning force also induces a bifurcation from moving phase to stationary phase suppressing the multiplicative noise effect. Additive noise reduces both effects of multiplicative noise and pinning force urging the system to the stationary one-cluster phase. The frustrated effects of pinning force and additive and multiplicative noises lead to a reentrant transition at intermediate additive noise intensity. Nature of the transition is also discussed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.824-834
• /
• 1999

Characteristics of two-phase flow and heat transfer were numerically investigated in a submerged gas injection system when temperature of the injected gas was different from that of the liquid. The Eulerian approach was used for both the continuous and dispersed phases. The turbulence in the liquid phase was modeled using the standard $k-\varepsilon$$\varepsilon$ turbulence model. The interphase friction and heat transfer coefficient were calculated from the correlations available in the literature. The turbulent dispersion of the phases was modeled by a "dispersion Prandtl number". In the case with heat transfer where the temperature of the injected gas is higher than the mean liquid temperature, the axial and the radial velocities are lower in comparison with the case of homogeneous temperatures. The results in the present research are of interest in the design and operation of a wide variety of material and chemical processes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.275-282
• /
• 2008

This paper presents numerical investigation of multi-phase flow in solid rocket motor nozzle and effect of multi-phases on the performance prediction of the Solid Rocket Motor. Aluminized propellants are frequently used in solid rocket motors to increase specific impulse. An Eulerian-Lagrangian description has been used to analyze the motion of the micrometer sized and discrete phase that consist of the larger particulates present in the Solid Rocket Motor. Uniform particles diameters and Rosin-Rammler diameter distribution method has been used for the simulation of different burning of aluminum droplets generating aluminum oxide smokes. Roe-FDS scheme has been used to simulate the effects of the multi-phase flow. The results obtained show the sensitivity of this distribution to the nozzle flow dynamics, primarily at the nozzle inlet and exit. The analysis also provides effect of two phases on performance prediction of Solid Rocket Motor.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.163-164
• /
• 2002

In the past two decades, separations of enantiomers (optical isomers) by high-performance liquid chromatography (HPLC) have remarkably advanced ［1］. Among many commercially available chiral stationary phases (CSPs) for HPLC, polysaccharide-based CSPs are the most popular ones, which can cover the resolution of a wide range of the chiral compounds ［2, 3, 4］. Here, I will explain mainly the HPLC separation of enantiomers using these CSPs. (omitted)

• The Korean Journal of Ceramics
• /
• v.5 no.3
• /
• pp.205-210
• /
• 1999

The thermodynamic properties and phase diagram of the$ PbO-ZrO_2$ system have been critically assessed using the Thermo-Calc program. Excess Gibbs energies were expressed by Redlich-Kister polynomials for the solid phases, by the two-sublattice ionic liquid model for the liquid phase and by the compound energy model for the solid solution phase. All solid phases were treated as stoichimetric compounds.

• Journal of the Korean Ceramic Society
• /
• v.31 no.1
• /
• pp.25-30
• /
• 1994

W-Ti-C-N based multiphase hard materials have been prepared from WC/TiN powder mixture. By sintering at and above 190$0^{\circ}C$, the two phases of powder mixture has transformed into intermixed W, W2C and Ti(C, N) phases. For the temperature range between 180$0^{\circ}C$ and 210$0^{\circ}C$, the sintered or hot pressed samples show maximum density and hardness. The seems that metallic W grains enhance the fracture toughness of materials. The wear resistance of the material is found to increase with increasing hardness.