• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.93-105
• /
• 2012

본 연구에서는 무기염인 NaCl, KCl, $NaNO_3$ 및 $KNO_3$의 각 전해질과 L형 아미노산인 L-Valine 및 L-Proline이 용해된 아미노산/전해질 수용액에서 L-Valine 및 L-Proline의 활동도계수와 용해도를 298.15 K에서 측정하였다. 아미노산의 활동도계수는 양이온 및 음이온의 선택성 전극간의 기전력을 측정하는 전기화학 법으로 측정하였으며, 용해도는 아미노산의 고체상과 상평형을 이루고 있는 포화용액을 중량 분석하여 측정하였다. 실험적으로 측정된 전해질 및 아미노산의 활동도계수 값을 본 연구의 저자들이 수행한 지난번 연구[Korean Chem. Eng. Res. 48(4), 519(2010)]의 이론적 모델로 검토하였다. 실험을 수행한 8개의 아미노산/전해질 수용액에서 측정된 전해질 및 아미노산의 활동도계수 값은 지난번 연구의 이론적 모델에 잘 적용되는 경향을 보였으며, 또한 측정된 아미노산의 용해도 데이터도 지난번 연구의 이론적 관계로 잘 묘사될 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.144-144
• /
• 2013

Non-thermal atmospheric pressure plasmas have recently garnered much attention due to their unique physical and chemical properties that are sometimes significantly different from those of low pressure plasmas. It can offer many possible application areas including nano and bio/medical areas. Many different types of plasma sources have been developed for specific needs, which can be one of the important merits of the atmospheric pressure plasmas since characteristics of the produced plasma depend significantly on operating parameters such as driving frequency, supply gas type, driving voltage waveform, gas flow rate, gas composition, geometrical factor etc. Among many source configurations, parallel plate type geometry is one of the simplest configurations so that it can offer many insights for understanding basic underlying physics. Traditionally, the parallel plate type set up has been studied actively for understanding low pressure plasma physics along with extensive employment in industries for the same reason. By considering that understanding basic physics, in conjunction with plasma-surface interactions especially for nano & bio materials, should be pursued in parallel with applications, we investigated atmospheric pressure discharge characteristics in a parallel plate type capacitive discharge source with two parallel copper electrodes of 60 mm in diameter and several millimeters in gap distance. In this presentation, some plasma characteristics by varying many operating variables such as inter-electrode distance, gas pressure, gas composition, driving frequency etc will be discussed. The results may be utilized for plasma control for widening application flexibility.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.631-631
• /
• 2013

Battery has major drawbacks including its size and life expectancy, and environmental problem. As an alternative, energy harvesting is emerging as a potential solution to replace battery along with more energy-efficient IT devices. The idea of harnessing energy from our living environment is sustainable, semi-permanent, and eco-friendly. Also, unlike battery, energy harvester does not require much space to store energy. Therefore, energy harvesting can provide a better source of power for small, portable, and wireless devices. Among various ways of harvesting energy from our surroundings, triboelectricity is chosen due to its potential to be miniaturized, and efficient. Triboelectric effect occurs as two different materials with different polarity of charge separation come into contact through friction, and then become separated so that electric potential difference is achieved. In this research, such characteristic of triboelectricity is used as a way to convert ambient mechanical energy into electric energy.Series of recent researches have shown promising results that the triboelectric energy harvester can be simple and cost effective. However, sufficient electricity level required to operate mobile devices has not yet been achieved.In this research, our group focuses on the design and optimization of triboelectric energy harvesting device to enhance its output. By using maskless lithography to pattern Kapton film and silicon substrate, which is used as a mold for PDMS thin layer, and sputtering metal electrodes on each side, we fabricate and demonstrate different designs of triboelectric energy harvester that utilizes the contact electrification between a polymer thin film and a metal thin foil. In order to achieve optimized result, the output voltage and current are measured under diverse conditions, which include different surface structure and pattern, material, and the gap between layers.

• The Korean Journal of Physiology
• /
• 제17권1호
• /
• pp.63-69
• /
• 1983

This study was conducted to investigate the effect of prostaglandin $E_2(PGE_2)$ and indomethacin upon the electrical activity of the isolated cat stomach muscle strips$(1.5{\times}7.0\;cm)$. Fifty-seven muscle strips, obtained from 57 cat stomachs(including corpus and antrum) were studied in a muscle chamber filled with Krebs solution(pH 7.4, temperature $36{\pm}0.5^{\circ}C$) aerated with 5% $CO_2$ in $O_2$. The electrical activity was recorded by five capillary electrodes (Ag-AgCl), of which two were placed on the corpus and three on the antrum. After recording of the electrical activity in normal Krebs solution, $PGE_2$ in concentrations of 0.25(N=7), 0.5(=7), 1(N=7) and $2{\times}10^{-7}\;M(N=6)$ were administered to 27 muscle strips, while indomethacin was applied in concentretions of 0.25(N=9), 0.5(N=10), 1(N=6) and $2{\times}10^{-3}\;M(N=5)$ to the remaining 30 strips. The mean frequency were minutely measured from each electrogastrogram. 1) By adding $PGE_2$ in all doses, gastric slow wave frequency increased significantly compared with that in resting state. 2) Following $PGE_2$ administration, peak slow wave frequency increased dose-dependently. 3) After indomethacin addition in all doses, the slow wave frequency decreased significantly compared with that in resting state. 4) Following indomethacin administration, incidence of complete abolition of slow wave increased dose-dependently, and its latent period decreased also in a dose-dependent manner. It is inferred from the above results that prostaglandin $E_2$ has a facilitatory role in the development of gastric slow wave in cat.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.863-871
• /
• 2013

Dielectric discharges are an emerging technique in environmental pollutant degradation, which that are characterized by the production of hydroxyl radicals as the primary degradation species. For practical application of the plasma reactor, reactor that can handle large amounts of water are needed. Plasma research to date has focused on small-scale water treatment. This study was carried out basic study for scale-up of a single DBD (dielectric barrier discharge) plasma reactor. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) was used as a performance indicator of multi-plasma reactor. The experiments is divided into two parts: design parameters [effect of distance of single plasma module (1~14 cm), arrangement of ground electrode (single and multi), rector number (1~5) and power number (1~5)]; operation parameter [effect of applied voltage (60~220 V), air flow rate (1~5 L/min), electric conductivity of solution ($1.4{\mu}S/cm$, deionized water)~18.8 mS/cm (addition of NaCl 10 g/L) and pH (5~9)]. Considering the electric stability of the plasma reactor, optimum spacing between the single plasma module was 2 cm. Multi discharge electrodes - single ground electrode array was selected. Combination of power 3-plasma module 5 was the optimal combination for maximum RNO degradation. The optimum 1st voltage and air flow rate for RNO degradation were 180 V and 4 L/min, respectively. The pH and conductivity of the solution was not influencing the RNO degradation.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.43-52
• /
• 2017

In this paper, for the first time, the electroanalytical study of Triethylenediamine, TEDA was done on a typically graphene modified carbon paste electrode (Gr/CPE) in pH=10.5 of phosphate buffer solutions (PBS). The surface morphology of the bare and modified electrodes was characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electro-oxidation of TEDA was investigated at the surface of modified electrode. The results revealed that the oxidation peak current of TEDA at the surface of Gr/CPE is 2.70 times than that shown at bare-CPE. A linear calibration plot was observed in the range of 1.0 to 202.0 ppm. In this way, the detection limit was found to be 0.18 ppm. The method was then successfully applied to determination of TEDA in aqueous samples obtained from two kinds of activated carbon from the masks of war. On the other hand, density functional theory (DFT) method at B3LYP/6-311++G** level of theory and a conductor-like Polarizable Continuum Model (CPCM) was used to calculate the $pK_a$ values of TEDA. The energies of lowest unoccupied molecular orbital ($E_{LUMO}$) and highest occupied molecular orbital ($E_{HOMO}$), gap energy (${\Delta}E$) and some thermodynamic parameters such as Gibbs free energy of TEDA and its conjugate acid ($HT^+$) were calculated. The results of calculated $pK_a$ were found to be in good agreement with the experimental values.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.246-252
• /
• 2017

Pulverized $FeS_2$ (pyrite) gives different discharge test results with as-received $FeS_2$ electrodes. The as-received $FeS_2$ electrode shows three voltage plateaus during the discharge test. However, the ball-milled $FeS_2$ electrode shows two voltage plateaus. To interpret this result, the effect of $FeS_2$ particle size on electrochemical reactions is investigated by unit cell discharge tests, SEM and XRD. As a result, it is found that the transition reaction product ($Li_2+xFe+xS_2$) of $FeS_2$ explains the difference. The as-received $FeS_2$ reacts according to three reaction steps ($FeS_2{\rightarrow}Li_3Fe_2S_4{\rightarrow}Li_2+xFe_1+xS_2{\rightarrow}LiFe_2S_4$). However, ball-milled $FeS_2$ reacts without the $Li_2+xFe_1+xS_2$ stage. In this study, this result is explained by the difference in electrochemical reaction mechanism. The as-received $FeS_2$ has a larger radius than the ball-milled $FeS_2$. Therefore, the lithium ion has to diffuse into the $FeS_2$ unreacted core, and $Li_2+xFe_1+xS_2$, the transition reaction product of as-received $FeS_2$, is formed during this stage.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.590-593
• /
• 2010

추진제를 추진제 탱크에 충전하는 과정은 발사 준비 과정에서 중요한 역할을 하며, 추진제 충전량의 정확도는 발사체 전체 무게와 관련되어 있다. 발사체에 사용되는 추진제 중에는 액체산소와 같은 극저온 추진제도 사용되며, 극저온 추진제는 탱크 내의 환경에 따라 쉽게 액상에서 기상으로 변화된다. 따라서 추진제 탱크 내의 추진제 표면 주위에서 추진제 수위를 판별할 수 있는 액상과 기상의 경계면을 명확하게 파악 할 수 있는 수위 측정시스템이 필요하다. 본 연구에서는 정전용량형 3전극 원리를 이용한 측정시스템의 제작과정과 예비시험을 통하여 액체의 높이가 변화할 때 전기신호가 변화되는 것을 확인하였다. 시험 결과로부터 물의 높이 변화에 비례하게 전압이 선형적으로 증감하는 경향을 파악하였다.

• 한국의학물리학회지:의학물리
• /
• 제26권2호
• /
• pp.99-105
• /
• 2015

모니터 전리함은 의료용 선형가속기에서 방출되는 방사선의 세기와 출력 제어를 위하여 사용된다. 본 연구에서는 가속기 기반 방사선 발생장치의 제어 시스템 개발에 사용하기 위하여 모니터 전리함 시작품을 개발하였다. 개발한 모니터 전리함은 평행 평판형 전리함 형태로서 독립적 작동이 가능한 두 개의 전리함으로 구성되어 있으며, 전극의 재료는 방사선의 감쇠를 최소화하기 위하여 얇은 연성인쇄회로기판이 사용되었다. 전리함의 시험을 위하여 코발트-60 방사선원을 이용하여 측정된 전하의 포화특성과 선형성과 같은 선량학적 특성을 평가하였다. 결과적으로 개발된 시작품이 기본 성능을 만족하며 추가 연구의 가능성을 확인하였다.

• 한국입자에어로졸학회지
• /
• 제9권2호
• /
• pp.103-110
• /
• 2013

The electrostatic precipitator (ESP) has been used for degrading atmospheric pollutants. These devices induce the electrical forces to facilitate the removal of particulate pollutants. The ions travel from the high voltage electrode to the grounded electrode by Coulomb force induced by the electric field when a high voltage is applied between two electrodes. The ions collide with gas molecules and exchange momentum with each other thus inducing fluid motion, electrohydrodynamic (EHD) flow. In this study, for the simulation of electric field and EHD flow in ESPs, an open source EHD solver, "espFoam", has been developed using open source CFD toolbox, OpenFOAM(R) (Open Field Operation and Manipulation). The electric potential distribution and ionic space charge density distribution were obtained with the developed solver, and validated with experimental results in the literature. The comparison results showed good agreement. Turbulence model is also incorporated to simulate turbulent flow; hence the developed solver can analyze laminar and turbulent flow. In distributions of electric potential and space charge, the distributions become distorted and asymmetric as the flow velocity increases. The effect of electrical drift flow was investigated for different flow velocities and the secondary flow in a flow of low velocity is successfully predicted.