• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.416-420
• /
• 2008

This paper proposes a new method to improve signal characteristics at branches frequently met in system-level routing. We also introduce the numerical formula which can estimate the time delay due to branches and the simple design guideline for system-level routing. Finally, we propose the routing method which can eliminate the signal reflection for the case of one driver and two receivers (multi-drop topology).

• ETRI Journal
• /
• v.29 no.6
• /
• pp.716-724
• /
• 2007

As ultra-wideband impulse radio (UWB-IR) uses short-duration impulse signals of nanoseconds, even a small number of timing errors can cause a detrimental effect on system performance. A delay-locked loop (DLL) is proposed to synchronize and reduce timing errors. The design of the DLL is vital for UWB systems. In this paper, an improved DLL is introduced to a UWB-IR time-hopping spread-spectrum system. Instead of using only two central correlator branches as in a conventional DLL, the proposed system uses two additional correlator branches with different delay parameters and different weight parameters. The performance of the proposed schemes with the optimal parameters is compared with that of traditional schemes through simulation: the proposed four-branch DLLs achieves less tracking jitter or a longer mean time to lose lock (MTLL) than the conventional two-branch DLLs if proper parameters are chosen.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.71-74
• /
• 2002

Fluid flow in a rectangular duct system are measured by W laser doppler velocity meter, and also computed by commercial software of STAR-CD for comparison between then First, for a rectangular duct with 90 degree metered elbow, the fluid flow with Reynolds numbs's of 1,508 is predicted by assumption of both laminar and turbulent models. But, even though the Reynolds number is less than 2,300-3,000, the computation by turbulent model is close to the experimental data. Moeover, the computation by turbulent model for Reynolds number of 11,751 also predicts the experimental data satisfactorily. Second, for a rectangular duct with two branch ducts, the ratios between flow rates in the two branches are invariant to Reynolds number according to both of numerical and experimental results.

• The Journal of the Korean dental association
• /
• v.50 no.10
• /
• pp.624-629
• /
• 2012

This study examined the anatomical relationships along with the variability of the facial nerve trunk and its branches with an emphasis on the intraparotid connections between the divisions. And histomorphometric observations of the facial nerve branches and fascicles were performed on 40 Korean half-heads. The facial nerve trunk was bifurcated into two main divisions(35/40, 87.5%) and the other five cases were divided into a trifurcation pattern. According to the origin of the buccal branch, the branching patterns of the facia l nerve were classified into four categories. Communications between the facial and auriculotemporal nerve branches were observed in 37 out of 40 cases(92.5%). In the histological observation, the buccal branch had the greatest number of branches(3.47), however the zygomatic branch had the largest diameters(0.93mm). This detailed description of the facial nerve anatomy wi ll provide useful information for surgical procedures such as a tumor resection. a facial nerve reconstruction, autonerve graft. and facelift.

• Journal of Ecology and Environment
• /
• v.36 no.4
• /
• pp.449-463
• /
• 2013

DNA barcoding is becoming a widely applied tool to accurately discriminate red algae. We tested the effectiveness of DNA barcoding for identification and discovery of Champia species in Korea and clarified the phylogenetic relationships using the plastid rbcL gene. As results, we described four species of Champia such as C. inkyua sp. nov., C. recta Noda, C. bifida Okamura, and C. expansa Yendo. A new species, C. inkyua, is characterized by entangled thallus, terete and irregular branches, hooked apices, and longitudinal filaments running throughout the frond periphery only. Longitudinal filaments were composed of a complete cell with two half cells between diaphragms in the cavity. C. recta and C. bifida were reinstated with previously used names of C. parvula and C. compressa, respectively. C. recta is the first recorded species from Korea and is characterized by an erect thallus, terete and irregular branches, and straight apices. C. bifida is characterized by compressed thallus, pinnate or alternate branches, and bifid apices. C. expansa is characterized by flabellate thallus and dichotomous branches. Molecular analyses of COI and rbcL genes revealed sufficient sequence divergence to warrant species recognition in the genus Champia.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.224-228
• /
• 2002

We investigated the quench properties of superconducting fault current limiters (SFCLs) connected in parallel. It was carried out as an effort to scale up the current capacity of SFCL toys texts. SFCLs were based on $YBa_2$$Cu_3$$O_{7}$ films coated in-situ with a gold layer and fabricated by patterning the films into 2 mm wide and 42 cm long meander lines by photolithography. Two SFCLS were connected in parallel and tested with simulated AC fault currents. Initially the current was divided unequally into branches of parallel connection due to unequal resistance of the branches. However, once quench started in the SFCLs, the current oscillated between the branches and then was distributed nearly equally between the branches. In other words, the elements quenched simultaneously. The oscillation amplitude decreased as the source voltage was increased: the oscillation was the most prominent near the quench current. The observed oscillation and the consequent simultaneous quench was understood in terms of quench start and development in the SFCLs.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.1
• /
• pp.36-42
• /
• 2004

Materials and Methods: We studied 50 cases of peroneal perforating branch about branching pattern, course, length of vascular pedicle, and perforating level of the perforating cutaneous branches from Oct. 1985 to November 2003 by doppler flow meter and intraoperative findings. Results: 1) The perforating cutaneous branches were classified into four types, the Straight Branch (27cases), the Proximal Oblique Branch (11cases), the Branch from Muscular Artery (10cases), the Distal Oblique Branch(2 cases) respectively. The most common patten was Straight Branch, that was 54%. 2) There were 3 pathways of these branches, the most common one passed between the Soleus and Peroneus muscles(34 cases, 68%) 3) The length of vascular pedicle in Buoy Flap was variable from from 3 cm to 15 cm, but 32 cases(64%) were distributed between 5 cm and 6 cm. 4) The perforating level of branches were 5.9 cm in average from fibular neck to subcutaneous perforator artery 5) Peroneal Buoy Flap in possible to reconstruct both seperated bone and skin defect in some distance by One-Stage Operation and we can harvest maximal $8{\times}16cm$ sized flap in one perforating artery. If we include more two perforating artery, we get more wide flap which can cover large defect.

• Journal of Plant Biology
• /
• v.39 no.1
• /
• pp.23-29
• /
• 1996

Morphology and reproduction of Polysiphonia atlantica Kapraun et J. Norris were studied on the basis of field and laboratory cultured materials collected from the coast of Korea. The plants consisted of prostrate and erect axes with an extremely soft flaccid texture. Axes were ecorticated and had four pericentral cells. The plants except for female gametophytes had few trichoblasts. Branches in the upper portion of the thallus grew to the same level, resulting in a flat-top form. Tetrasporangia were arranged in straight series. Spermatangial branches replaced whole trichoblasts and had a 1-2 celled serile tip. The procarp had a four celled carpogonial branch. After fertilization, the carpogonium contancted the surface of the supporting cell. The formation of the auxiliary cell from the supporting cell was somewhat delayed P. atlantica from Korea was similar to P. subtilissima Montagne in some features. However, the taxonomic differences between the two species were identified in the development of branches and the number of sterile cells at the tip of spermatangial branches.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.59-59
• /
• 2020

Salix gracilistyla has a characteristic of fast growth especially in the river side or infertile soil, showing a lot of lateral branches and a strong root system among the Salix. spp. On the basis of results observed, we provide several growth characteristics of S. gracilistyla among some selected provenances. In two-year results, root collar diameter ranged from 33.5 mm to 56.7 mm. Taeback showed the lowest value, and Jeongseon and Hoengseong were higher than the other areas in the traits above. Height growth was the lowest in Samcheok and the highest in Wonju. To examine growth and development of lateral branches is important because S. gracilistyla has a lot of lateral branches which account for high biomass production. Length of lateral branch showed high variation, in which the highest number was observed in Yeongwol and the lowest in Samcheok. Many lateral branches were shown in Wonju. Preliminary study on biomass resources evaluation, we analyzed correlation between volume and length, and volume and root diameter. High correlation was observed between root diameter and plant volume. And we compared the observed volume with the caculated volume by regression formula. To evaluate Salix species as biomass resources, it is needed to survey growth characteristics continuously and adopt selection of individuals or families of high biomass and caloric values by reliable data. In addition, Salix spp. can be also applicable to selection breeding regime because of feasible propagation and fast growth.

• Korean Journal of Veterinary Research
• /
• v.27 no.2
• /
• pp.157-166
• /
• 1987

The distribution of hepatic veins within the liver in 28 Korean native cattles were observed. Vinylite solution was injected into hepatic veins of seventeen specimens for cast preparation. The angiography was prepared in eleven specimens by injecting 30% barium sulfate solution into hepatic veins, and then radiographed on a X-ray apparatus (Shimadzu 800 MA 120 Kvp). 1. About two thirds or three quarters of the circumference of the Vena cava caudalis was embedded in the liver. The embedded portion was about 14~19cm in length. 2. The principal branches of the hepatic veins were Vena hepatica sinistra, Vena hepatica media, Vena hepatica dextra and Vena hepatica dorsolateralis; the three main hepatic veins were Vena hepatica sinistra, Vena hepatica media and Vena hepatica dextra. 3. The Vena hepatica sinistra joins the Vena cava caudal is near the esophageal impression of the liver. It gave off three or five branches to the left lobe. 4. The Vena hepatica media joined at the Vena cava caudalis close to the Vena hepatica sinistra. In all cases, Vena hepatica media opened near the diaphragmatic part of the liver than the Vena hepatica sinistra. It ran obliquely through the medial part of right lobe and quadrate lobe, giving off branches on each side. 5. The Vena hepatica dextra consisted of one(25 cases, 89.29%) or two separate veins(3 cases, 10.71%), joining to the Vena cava caudalis between the right and caudate lobes. 6. The flap of membranous tissue covered the dorsal half of the entrance of the Vena hepatica sinistra, media et dextra into the Vena cava caudalis. 7. The vestige of the ductus venosus persisted in the 12~18 months old cattles. 8. The anastomosis was observed in the intralobar and interlobar areas.