• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.445-453
• /
• 2015

The stress triaxiality and lode angle are known to be most dominant fracture parameters in ductile materials. This paper proposes a three-dimensional failure strain surface for a ductile steel, called a low-temperature high-tensile steel (EH36), using average stress triaxiality and average normalized lode parameter, along with briefly introducing their theoretical background. It is an extension of previous works by Choung et al. (2011; 2012; 2014a; 2014b) and Choung and Nam (2013), in which a two-dimensional failure strain locus was presented. A series of tests for specially designed specimens that were expected to fail in the shear mode, shear-tension mode, and compression mode was conducted to develop a three-dimensional fracture surface covering wide ranges for the two parameters. This paper discusses the test procedures for three different tests in detail. The tensile force versus stroke data are presented as the results of these tests and will be used for the verification of numerical simulations and fracture identifications in Part II.

• International Journal of Advanced Culture Technology
• /
• v.7 no.1
• /
• pp.231-236
• /
• 2019

Background/Objectives: This paper proposes a dual mode feedback-controlled cycling system for children with spastic cerebral palsy to rehabilitate upper extremities. Repetitive upper limb exercise in this therapy aims to both reduce and analyze the abnormal torque patterns of arm movements in three- dimensional space. Methods/Statistical analysis: We designed an exercycle robot which consists of a BLDC motor, a torque sensor, a bevel gear and bearings. Mechanical structures are customized for children of age between 7~13 years old and induces reaching and pulling task in a symmetric circulation. The shafts and external frames were designed and printed using 3D printer. While the child performs active/passive exercise, angular position, angular velocity, and relative torque of the pedal shaft are measured and displayed in real time. Findings: Experiment was designed to observe the features of a cerebral palsy child's exercise. Two children with bilateral spastic cerebral palsy participated in the experiment and conducted an active exercise at normal speed for 3 sets, 15 seconds for each. As the pedal reached 90 degrees and 270 degrees, the subject showed minimum torque, in which the child showed difficulty in the pulling task of the cycle. The passive exercise assisted the child to maintain a relatively constant torque while visually observing the movement patterns. Using two types of exercise enabled the child to overcome the abnormal torque measured in the active data by performing the passive exercise. Thus, this system has advantage not only in allowing the child to perform the difficult task, which may contribute in improving the muscle strength and endurance and reducing the spasticity but also provide customizable system according to the child's motion characteristic. Improvements/Applications: Further study is needed to observe how passive exercise influences the movement characteristics of an active motion and how customized experiment settings can optimize the effect of pediatric rehabilitation for spastic cerebral palsy.

• The Mathematical Education
• /
• v.41 no.1
• /
• pp.45-58
• /
• 2002

This study was conducted to investigate the gender-related effects of two instructional programs on spatial visualization skills of ninth grade students. Two instructional programs were developed for this study: a web-based virtual reality program and a paper-based program. 194 ninth graders from two middle schools in Seoul participated in this study. Six classes were divided into experimental groups and control groups. The Middle Grades Mathematics Projects (MGMP) Spatial Visualization Test was used to measure spatial visualization skills. The data analysis indicated that both the web-based and paper-based programs were effective to improve spatial visualization skills to treatment groups. Although boys'test mean scores were higher than girls' in the pretest, when deleting the effect of covariance of pretest, there were no statistical significance in the post-test. Girls in the treatment groups favored the paper-based spatial visualization program. These results imply that spatial training may benefit girls' performance more than that of boys and mode of instructional programs can create gender-related differences regarding spatial visualization skills.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.15 no.2
• /
• pp.1-11
• /
• 1978

Using the elliptical cylindrical function, the added masses of thin rectangular plates vibrating elastically in an infinite ideal fluid are calculated. For the boundary conditions of the plates, two models are adopted. The plate which is simply-supported on two opposite edges while the other edges are clamped is one and the other is the plate which is simply-supported on two opposite edges while the other edges are free. Same examples are calculated numerically for the fundamental mode in each cases. And the effect of the boundary condition on the added mass are investigated by comparing these data with those of Kim's[4] which were calculated for the simply-supported plates by the same method. It is concluded that it is possible to predict the added mass of a rectangular plate, whose boundary condition is not treated in this report, by using the result of this investigation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.6
• /
• pp.550-555
• /
• 2007

Stress intensity factor is one of the most important parameters in fracture mechanics. Both the stress field distribution and the crack propagation are closely related to these parameters. Due to the complexity of actual engineering problems, it is difficult to calculate the stress intensity factor by theoretical formulation, so photoelasticity method is a good choice. In this paper, modified two parameter method is employed to calculate stress intensity factor for opening mode by using data from more than one photoelastic fringe loop. For getting accurate experiment results, the initial fringes are doubled and sharpened by digital image programs from the fringe patterns obtained by a CCD camera. Photoelastic results are compared with those obtained by the use of empirical equation and FEM. Good agreement shows that the methods utilized in experiments are considerably reliable. The photoelastic experiment can be used for bench mark in theoretical study and other experiments.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.71-78
• /
• 1998

Inversion schemes of 2-D MT survey data generally take enormous computational time and computer memory. In addition, careful attention must be paid in handling MT data, especially in cases of TM mode, inversion results can be seriously distorted because of static effect caused by current channeling across inhomogeneous surface boundaries. There-fore inversion algorithm using the GRRI scheme for TM mode MT data was implemented. This scheme is based on a perturbation analysis with a locally 2-D analysis and local inversions were sequently performed over each divided section without additional forward modelings. The algorithm was applied to several synthetic data for the purpose of verification of its efficiency and applicability. With less computer resources than conventional schemes, it could handle static effect directly by including current channeling across inhomogeneous boundaries. Thus it is expected to be used for an useful tool such as a real-time inversion scheme in the field.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3717-3723
• /
• 2022

For the first time, two-dimensional temporal behavior of the edge localized mode (ELM) filament is measured in the edge tokamak plasma with a multi-channel electrical probe array (MCEP). MCEP, which has 16 floating probes (4 × 4), is mounted at the far scrape-off layer (SOL) region in the KSTAR. An electron temperature and an ion flux are measured by sideband method (SBM), which can achieve two-dimensional measurements with high time resolution. Furthermore, temporal evolutions of the electron temperature and the ion flux are obtained during the ELM occurrence. In the H-mode period, short spikes from ELM bursts are observed in measured plasma parameters, and the trend is similar to that of typical Hα signal. Interestingly, when blob-like ELM filaments crash the probe, the heat flux is significantly higher in a local region of the probe array. The results show that our probe array using the SBM can measure the ELM behavior and the plasma parameters without the effect of the stray current caused by the huge device. This study can provide valuable data needed to understand the interaction between the SOL plasma and the plasma facing components (PFCs).

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.2 s.4
• /
• pp.59-67
• /
• 2002

In this study, a method that estimates stiffness and mass matrices of shear building from modal test data is presented. This method applied of building depends on the number of measurement points that are less in number than the total structural degrees of freedom, and on the first two orders of structural mode measured. By means of this method it is possible to use modal data of unmeasurable points to estimate total stiffness and mass matrices of structure. Some examples are studied in this paper, and its result shows that this method is reliable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.183-186
• /
• 2015

Recently, the demand for the safety and the information delivery system in the ship increases. The deployment of the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by deforming some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-two way slave mode are designed and its measurement data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system for the deployment of the shipboard wireless networks can be built.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.265-274
• /
• 2017

For accurate demand forecasting of railway logistics, we estimated intercity freight mode choice models based on the binary logit model and using production-consumption data from the Korea Transport Database. We estimated two types of models and compared the results by major item of railway logistics, such as container, cement, and steel: 1) The aggregate freight mode choice models are based on the revealed preference (RP) data and 2) The disaggregate models are based on the stated preference (SP) data. With respect to the container, the travel time variable was found to be statistically significant; however, the travel cost variable was not statistically significant in the RP model, while the travel cost variable was statistically significant in the SP model. For cement and steel, the travel cost variables were statistically significant but the travel time variables were not statistically significant in either the RP or the SP models. These results are inconsistent with results from previous studies based on SP data, which showed that the travel time variables were significant. Consequently, it can be concluded that the travel time factor should be considered in container transport, but that this factor is negligible for cement and steel transport.