• Title/Summary/Keyword: Twist-drill

Search Result 34, Processing Time 0.02 seconds

A STUDY ON THE HEAT GENERATION OF BONE DRILLING BURS ACCORDING TO IRRIGATION DURING IMPLANTATION OF DENIAL IMPLANT (치과 임플랜트 식립시 관주에 따른 골 천공 기구의 열 발생에 관한 연구)

  • Moon, Eun-Soo;Lim, Heun-Song;Cho, In-Ho
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.37 no.4
    • /
    • pp.433-453
    • /
    • 1999
  • There are a lot of elements affecting the success of implant prosthesis. The quality of surgical procedure is considered as one of the key factors. To avoid the excess heat generation is an important element of successful osseointegration and it can be achieved by using a gentle surgical technique with a sharp instrument in bone drilling. This study was performed to measure and analyze comparatively the heat transmitted to sur-rounding bone at a distance of 0.5mm from the periphery of the drill hole in each drilling stage. The results were as follows. In standard system, the temperature of surrounding bone tissue ranged from $29.2^{\circ}C\;to\;48.3^{\circ}C$ with irrigation and from $34.6^{\circ}C\;to\;84.3^{\circ}C$ without irrigation. And in wide system, the temperature of surrounding bone tissue ranged from $29.5^{\circ}C\;to\;52.5^{\circ}C$ with irrigation and from $34.8^{\circ}C\;to\;87.8^{\circ}C$ without irrigation. And the temperature ranges exceeded the threshold without irrigation, while showing less than the threshold by the cooling effect of irrigation. In comparing standard system with wide system, although there was no significant difference, ${\phi}4.3mm$ pilot and ${\phi}4.3mm$ twist drill of wide system showed high value and wide system showed slightly high elevation of temperature in all depth in fixture installation. In the finite element analysis, the calculated value by the Fourier's cooling law were applied to the bone drilling surface. And through analysis using different irrigation temperatures at $28^{\circ}C,\;15^{\circ}C\;and\;5^{\circ}C$, and according to the time. The result was that the cooling water at least below $15^{\circ}C$ was required to maintain the temperature of surrounding bone less than threshold in bone drilling, the cooling water below $5^{\circ}C$ was required to gain more sufficient cooling effect, and cooling over 5 seconds was needed after bone drilling for sufficient effect.

  • PDF

EFFECT OF CALCIUM HYDROXIDE AND GLASS IONOMER CEMENT ON LEUKOTRIENE B4 AND C4 LEVELS IN EXPERIMENTALLY INFLAMED RAT DENTAL PULP (수산화칼슐과 글라스아이오노머 시맨트가 치수내 leukotriene B4와 C4의 농도에 미치는 영향에 관한 연구)

  • Park, Gye-Yang;Lim, Sung-Sam
    • Restorative Dentistry and Endodontics
    • /
    • v.21 no.2
    • /
    • pp.451-469
    • /
    • 1996
  • The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).

  • PDF

Accuracy of 5-axis precision milling for guided surgical template (가이드 수술용 템플릿을 위한 5축 정밀가공공정의 정확성에 관한 연구)

  • Park, Ji-Man;Yi, Tae-Kyoung;Jung, Je-Kyo;Kim, Yong;Park, Eun-Jin;Han, Chong-Hyun;Koak, Jai-Young;Kim, Seong-Kyun;Heo, Seong-Joo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.48 no.4
    • /
    • pp.294-300
    • /
    • 2010
  • Purpose: The template-guided implant surgery offers several advantages over the traditional approach. The purpose of this study was to evaluate the accuracy of coordinate synchronization procedure with 5-axis milling machine for surgical template fabrication by means of reverse engineering through universal CAD software. Materials and methods: The study was performed on ten edentulous models with imbedded gutta percha stoppings which were hidden under silicon gingival form. The platform for synchordination was formed on the bottom side of models and these casts were imaged in Cone beam CT. Vectors of stoppings were extracted and transferred to those of planned implant on virtual planning software. Depth of milling process was set to the level of one half of stoppings and the coordinate of the data was synchronized to the model image. Synchronization of milling coordinate was done by the conversion process for the platform for the synchordination located on the bottom of the model. The models were fixed on the synchordination plate of 5-axis milling machine and drilling was done as the planned vector and depth based on the synchronized data with twist drill of the same diameter as GP stopping. For the 3D rendering and image merging, the impression tray was set on the conbeam CT and pre- and post- CT acquiring was done with the model fixed on the impression body. The accuracy analysis was done with Solidworks (Dassault systems, Concord, USA) by measuring vector of stopping’s top and bottom centers of experimental model through merging and reverse engineering the planned and post-drilling CT image. Correlations among the parameters were tested by means of Pearson correlation coefficient and calculated with SPSS (release 14.0, SPSS Inc. Chicago, USA) ($\alpha$ = 0.05). Results: Due to the declination, GP remnant on upper half of stoppings was observed for every drilled bores. The deviation between planned image and drilled bore that was reverse engineered was 0.31 (0.15 - 0.42) mm at the entrance, 0.36 (0.24 - 0.51) mm at the apex, and angular deviation was 1.62 (0.54 - 2.27)$^{\circ}$. There was positive correlation between the deviation at the entrance and that at the apex (Pearson Correlation Coefficient = 0.904, P = .013). Conclusion: The coordinate synchronization 5-axis milling procedure has adequate accuracy for the production of the guided surgical template.

A study of the destructive styles from Contemporary Paintings - Focused on distinguishing enmity-destruction and self-destruction - (현대회화에서 드러난 해체의 형식론에 관한 연구 -타의적 해체와 자의적 해체의 성격규정을 중심으로-)

  • Park Ki-Woong
    • Journal of Science of Art and Design
    • /
    • v.7
    • /
    • pp.5-63
    • /
    • 2005
  • Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

  • PDF