• Title/Summary/Keyword: Twining

검색결과 30건 처리시간 0.026초

Fe-20Cr-1Si-1C계 경면처리 합금의 cavitation erosion 저항성에 미치는 Mn 첨가의 영향 (Effect of Mn-Addition on the Cavitation Erosion Resistance of Surface-hardened Fe-20Cr-1Si-1C Aolly)

  • 김수철;박인호;장세기;김선진;강성군
    • 한국표면공학회지
    • /
    • 제33권1호
    • /
    • pp.10-16
    • /
    • 2000
  • Characteristics of cavitation erosion resistance of Fe-20Cr-1Si-1C-xMn(x=0, 5, 15) alloys were investigated by SEM and XRD analysis. The effects on strain-induced transformations were considerably reduced with increasing the amounts of Mn due to twining that occurred at 5, 15Mn alloys, activating cavitation erosion rates(mg/$\textrm{cm}^2$) which varied as 0.055, 0.114 and 0.160mg/$\textrm{cm}^2$ for 0, 5, 15Mn. From the results, it was found that the addition of Mn element in Fe-base alloy provides more cracking sites at twins rather than absorbing strain energies, so accelerates cavitation erosion rates.

  • PDF

고망간 오스테나이트계 강판의 자동차 부품 적용성 연구 (A Study on the Application of High Manganese Austenitic Steel Sheet to Automobile Parts)

  • 정연일;채수홍;김소연;홍승현;임종대
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.393-396
    • /
    • 2009
  • The mechanical properties, press formability and texture of a TWIP steel were investigated. This steel combines both high strength and high ductility due to so called TWIP effect which are related to the microstructural changes. The formation of twins during deformation leads to an increase of its mechanical properties. In this study, the texture and mechanical properties evolutions of a TWIP steel subjected to tensile tests and press trials at room temperature were investigated in relation to the feasibility of the application to automotive body parts.

  • PDF

한국 고리수의 역사와 원형기술의 복원 연구 (A Study on History and Archetype Technology of Goli-su in Korea)

  • 김영란
    • 헤리티지:역사와 과학
    • /
    • 제46권2호
    • /
    • pp.4-25
    • /
    • 2013
  • 고리수는 편결(編結)과 금속공예의 기술이 접목된 새로운 형식의 수법(繡法)이다. 실올끼리 고리를 서로 엮어가며 공간상(空間上)에서 들떠 있어 마치 투조(透彫)와 같은 느낌을 준다. 수놓은 천에는 금박(金箔)이나 금실과 같은 황금 재질을 삽입하여 화려한 광택을 표현하고 있다. 이러한 특징은 고리수가 서구의 레이스워크(lacework) 공예와 그 형태 및 기법이 유사하면서도 가장 다른 점이다. 10세기 고려 초기, 강원도 월정사의 동자문수향갑낭(童子紋繡香匣囊)에서 고리수의 결구원(結構元) 무늬를 통해 초창기 자취를 발견할 수 있다. 조선 중기 왜란 시(1592, 선조 25년), 고리수 유물은 일본으로 약탈되어 '고려번(高麗幡)'이라고 불리며, 지금은 탁의(卓衣)의 형태로 개조되어 전한다. 19세기의 연대와 출처가 확실한 조선시대 궁수(宮繡) 베갯모에는 삼각무늬의 금박지(金箔紙)를 삽입하여 노란색 누에실을 엮어 짠 고리 감기수가 완벽하게 보존되어 있다. 고리수의 침법(針法)을 크게 분류하면, '고리수', '고리 감기수', '고리 새김수'의 3가지로 나눌 수 있다. 10세기경 초기 단계에서 13세기까지 고리수는 여러 침법으로 변화하며 점차 2~3가지의 입체적인 색채를 사용하였다. 고리수는 중세 이후 서양에서 비약적 발전을 보이며 고귀한 수공예로 알려진 레이스 짜기와 유사한 결구원을 지녔는데, 우리나라에서는 이미 10세기경 혹은 그 이전부터 편결과 금속공예가 접목된 복합적 공예 양식으로 탄생하여 천년 동안이나 그 수법(繡法)을 지속적으로 사용했다. 본 연구를 통해 한국에서 19세기 자수 베갯모에 고리수가 여전히 사용되고 있음을 밝혔다. 아울러 이러한 연구의 성과를 토대로 고리수의 원형기술을 복원했다. 그리고 '중요무형문화재 제80호' 기능보유자 한상수 자수장과 조선시대 고리수 유물들을 재현했다. 고리수 자수품은 편결과 금속공예의 황금세공기술이 자수공예와 접목하여 탄생된 전통과학기술의 복합적 산물(産物)이다. 이것을 계승과 창조의 새로운 방향으로 자수, 편결, 직조, 염색 등 기타 공예 관련 산업 분야에 확대 응용한다면, 의료(衣料)와 패션, 장식공예, 미술 디자인 등에 고급 부가가치의 신기술로 개발되어 활용될 수 있다. 또한 다른 공예기술과도 상호 보완된다면, 표현 영역의 확대와 더불어 다양한 예술적 조형미를 추구할 수 있어 우리의 삶에서 더욱 풍부한 미적 생활을 공유하게 되리라고 본다.

Conjoined Twins 1례 (A Case of Conjoined Twins)

  • 강미화;신손문;전진곤;김미진;남혜주;김성림;김종욱
    • Journal of Yeungnam Medical Science
    • /
    • 제5권2호
    • /
    • pp.255-261
    • /
    • 1988
  • 저자들은 본원에서 제왕절개술에 의해 태어난 후 약 3시간만에 사망한 dicephalus type의 conjoined twins를 1례 경험하였기에 문헌 고찰과 함께 보고하는 바이다.

  • PDF

황산티타늄의 첨가가 판상 α-Al2O3의 결정성장에 미치는 영향 (Effect of Titanium Sulfate Addition on Crystal Growth of the Flaky α-Al2O3)

  • 박병기;조선미;이정민
    • 한국세라믹학회지
    • /
    • 제42권5호
    • /
    • pp.338-345
    • /
    • 2005
  • To prepare the complex gel of flux and pseudo-boehmite used in precursor of the flaky ${\alpha}-A1_2O_3$ crystal, aqueous solution of the mixture of sodium carbonate and sodium phosphate was added with stirring in aqueous solution of the mixture of sodium sulfate, potassium sulfate and titanium sulfate. The complex gel was dried at $110^{\circ}C$ and was crystallized above $1,050^{\circ}C$, and then the effect of the amount of titanium sulfate on size, morphology, thickness and crystal size distribution of the flaky ${\alpha}-A1_2O_3$ crystal was investigated. Addition of titanium sulfate was prevented the aggregation and generation of twin crystal, and had an effect on the crystal size and the thickness during crystal growth. When the amount of titanium sulfate was more than 6 g, particle size was decreased but was free from crystal twining and aggregation. On the other hand, when the amount of titanium sulfate was lower than 6 g, crystal size was increased but crystal twinning and aggregation were noticed.

자수 및 직물 공예품의 보존처리 (Conservation of Embroidered Textiles and Textile Works)

  • 유효선
    • 복식
    • /
    • 제58권5호
    • /
    • pp.198-210
    • /
    • 2008
  • The purpose of this study is to establish the conservation methods of embroidered textiles and textile works. The conservation of remained textiles is consisting of examination, cleaning, support and consolidation, restoration, and storage and display process. It aims to prevent the damage on textile remains for long time display and storage and to prolong their aesthetics and functionality. The embroidered textiles and textiles works, which are remained by handed down or excavated or included in the Buddhist are embossed with colorful threads on the fabrics: the stitches include embroideries on clothing, bed clothes, wrapping clothes, utensil pouches, panels and Buddhist goods; textile works include hats, ornaments, shoes, attachments of clothes etc. These are composed of mainly fabrics, precious metals, leathers and precious stones, etc., and are fabricated by several techniques such as braiding, twining, sewing as well as weaving. Metal threads were also used to add a decorative effect on these goods. In order to conserve and preserve the remained goods, a special care must be taken on the metal threads, which are the most fragile material among the constituents. Hence, characteristics of metal threads and its cleaning methods, general conservation techniques of a rank badge, which is brocaded and partly attached to Cheogori and Samo(men's hat) from the excavated old tombs are introduced here.

Synthesis of Needle-Like Aragonite Crystals in the Presence of Magnesium Chloride and Their Application in Papermaking

  • Hu, Zeshan;Shao, Minghao;Li, Huayang;Cai, Qiang;Zhong, Chenghua;Xianming, Zhang;Deng, Yulin
    • Advanced Composite Materials
    • /
    • 제18권4호
    • /
    • pp.315-326
    • /
    • 2009
  • PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.

신라 $5{\sim}6$세기 임당고분군 직물의 특성 (The Characteristics of Textiles excavated in Shilla Tombs($5{\sim}6th$ Century))

  • 박윤미
    • 복식
    • /
    • 제58권1호
    • /
    • pp.9-16
    • /
    • 2008
  • Six of the Imdang tombs containing remains with imprints of ancient fabrics and textiles were investigated. Within the tombs, a total of 120 pieces of imprinted fabrics and textiles were investigated, all of which belongs to $5{\sim}6C$ Shilla period. All of the hemp textiles examined exhibited similar characteristics found in ancient hemp textiles: they were woven by plain weave technique with s-twist threads. The examined silk could be categorized into plain woven silk, cho, and double woven brocade, all of them made with non-twisted threads and degummed silk. The density of the plain woven silk ranged from 39 threads to 144 threads. Cho was also found, which showed similar characteristics to those of Gaya and Bakjae tombs. One piece of 2/1 twill weave on plain ground and 12 pieces of double woven brocade were found and their average density was $97.4{\times}33.4/cm$ with denser warp than weft. The various thickness of the threads were observed in the examined plain braid. The silk with twining technique showed thicker warp than weft. This is similar to the techniques of fabrics found in the King Muryeoung's Tomb of the Bakjae period. Fabrics with the purple-like color were observed in the some of the double woven brocades and also on the plain woven silk imprinted on the remains. The purple-like color was revealed to be purple with a tint of violet. The two tombs from which the imprinted fabrics with purple-like color were found belonged to top-class social level of the Shilla period, which informs that the purple color was used exclusively for the people of higher social status. The floss silk was found between the double woven brocade and plain woven silk of the belt, which is an important evidence that the floss silk was used for stuffing in the early 6th century.

Economic Assessments of Hormonal and Nutritional Treatments for Improvement of Awassi Sheep Production in Jordan

  • Nasr, R.E.;Haddad, S.G.;Al-Karablieh, E.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권8호
    • /
    • pp.1110-1114
    • /
    • 2002
  • The animal production sector in Jordan is characterized by shortages of locally produced feedstuffs derived from rangeland, forage plants or from human food crops as by products. This is exacerbated by insufficient rainfall, overgrazing, early grazing and high stocking rate. Thus, subject to these constraints, other technological improvements are highly desirable to meet the needs of crop growth and animal production. Alternative adapted technologies are also desirable in order to meet the increased demand for red meat in relation to population growth along with the changes in the price subsidy for feedstuff. The technologies are those, which have been introduced to the animal production sector, obtained in agricultural research stations besides on-farm demonstrations. They include technologies suited for increasing birth and twining rates, synchronizing the mating period, introducing the early weaning method, and animal feed and sheep production. Economic assessments conducted in this study demonstrate promising results of hormonal and nutritional practices in improving production efficiency of Awassi sheep in Jordan. Jordanian published data between 1991 and 1998 were used. The examined practices were: 1) use of PMSG in estrus synchronization in ewes, 2) introduction of early lamb weaning program, 3) supplementation with $AD_3E$ for ewes and 4) the use of agro-industrial feed block as a feed supplement for grazing lambs. Production data were then subjected to partial budgeting for economical evaluation. The use of PMSG outperformed the control groups in fertility and net returns per ewe by US$ 8.36/ewe. The early weaning of lambs increased the net returns by US$ 3.90/lamb. The injection with vitamin $AD_3E$ showed an average additional net return of US$ 5.66/ewe. Feeding agriculture by-product blocks improved weight gain in the feed block groups and resulted in additional net returns of US$ 3.5/lamb. The economic viability and reproductive performance indicators demonstrate that efforts should be undertaken to disseminate these new practices in the development program.

EF-TEM 직접가열 실험을 통한 titanium의 고온 상전이 연구 (A Study of Titanium Phase Transition through In-situ EF-TEM Heating Experiments)

  • 김진규;이영부;김윤중
    • Applied Microscopy
    • /
    • 제33권1호
    • /
    • pp.49-58
    • /
    • 2003
  • EF-TEM 직접가열 실험을 통하여 titanium의 ${\alpha}-{\beta}$상전이를 연구하였다. 통계적 오차를 줄이기 위해 서로 다른 3군데의 titanium foil의 영역을 관찰하였고, 각각의 영역에 대해 단계별로($RT{\rightarrow}600{\rightarrow}900{\rightarrow}RT$) 회절패턴과 이미지를 기록하였다. 이 연구를 통해 얻은 결과는 다음과 같다. (1) Titanium은 $900^{\circ}C$에서 급격히 상전이가 진행된다. 이 온도에서는 ${\alpha}$${\beta}$-상이 같이 존재한다. (2) 상전이가 일어난 ${\beta}$-상의 영역은 쌍정구조를 가진 plate 형태로 나타나며, 그들은 서로 상호 회전 배열되어 있다. (3) 전자회절도형과 EDS 분석 결과, $600^{\circ}C$ 이상의 가열에서는 열적 산화에 의해 Ti의 산화물이 표면에서 생성되기 시작하며 이들은 냉각 시 Ti의 ${\beta}{\rightarrow}{\alpha}$ 가역 상전이를 저해한다.