• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.254-257
• /
• 2003

Statistical analysis is performed to estimate the correlations between geological or geographical factor and groundwater inflow rates in the Seoul subway system. Correlation analysis shows that among several geological and geographical factors fractures and streams have most strong effects on inflow rate into tunnels. In particular, subway line 5∼8 are affected more by these factors than subway line 1∼4. Time series analysis is carried out to forecast groundwater inflow rate. Time series analysis is a useful empirical method for simulation and forecasts in case that physical model can not be applied to. The time series of groundwater inflow rates is calculated using the observation data. Transfer function-noise model is applied with the precipitation data as input variables. For time series analysis, statistical methods are performed to identify proper model and autoregressive-moving average models are applied to evaluation of inflow rate. Each model is identified to satisfy the lowest value of information criteria. Results show that the values by result equations are well fitted with the actual inflow rate values. The selected models could give a good explanation of inflow rates variation into subway tunnels.

• 한국전자파학회지:전자파기술
• /
• 제11권4호
• /
• pp.39-52
• /
• 2000

A design of 2 stage S-DLVA(successive detector log video amplifier) was studied to detect wide dynamic radar pulse ranging from -70 ㏈m to 0㏈m. A basic design idea was focused on the linear detection in logarithmic scale of wide dynamic range radar pulses from nosie-like weak power of -70 ㏈m to relatively high power 0 ㏈m. It is highly formidable, since it requires high speed detection less than 10 nsec over the operating frequency ranges from 6 to 18 ㎓. A limiter diode, a tunnel diode and an L17-C were used as a protecting device, a detector diode and a log video amplifier in companion as a single stage detector to give voltage output proportional to the input power of about 35 ㏈ dynamic range. A protype of 2-stage DLVA having one more single stage detector was fabricated with a 32 ㏈ low noise amplifier and a 3 ㏈ hybrid coupler to provide total 70 ㏈ dynamic range detection. The logging characteristics were measured to have log slope of 25m.V/㏈ against 70 ㏈ logging range from -55 ㏈m to +15 ㏈m, the log linearity of within +/- 1.5 ㏈, and tangential sensitivity was at -63 ㏈m. The pulse dynamics of rise time and recovery time were measured as 50 nsec and 1.2 $\mu$sec, respectively. The reason might be due to the parasitic capacitances of packaged limiter, tunnel diode, and L17-C.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1166-1171
• /
• 2008

Through Korean high speed train development project "G7 Leading Technology Development Project" from 1996 to 2002, HSR-350X has been developed. It can run the maximum operating speed of 350 km/h. Based on this technology, KTX-2 which will be served commercially has been developed till 2007. This paper introduces the aerodynamic analysis of the High-Speed EMU and shows the results of optimized aerodynamic nose shape design techniques and clean pantograph panhead original techniques study. These are the important parts of developments for high speed train which maximum speed is 400 km/h. Especially for decrease of tunnel micro pressure waves, the optimized nose area distributions were derived and the characteristics of micro pressure wave were analyzed. The robust optimized pantograph panhead shapes investigated to improve the performance and decrease the vortex flow which is thought to be its noise source. These shapes are clean and robust to external disturbances like unsteady accelerated flow or side wind was derived. Finally aerodynamic performances was verified with PIV and smog visualization by wind tunnel test.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.345-352
• /
• 2022

도심지 터널 건설에서 발파공법은 민원이 제기되는 문제점이 있어 적용에 제약받고 있다. 이에 대한 대안으로 TBM 및 기계굴착 공법 적용이 필수적으로 검토되고 있다. 이 중 쉴드 TBM(Tunnel Boring Machine)은 굴진과 세그먼트 체결이 번갈아 반복되며 굴진하는 공정을 가지고 있는데, 세그먼트 체결 동안 굴진을 멈추게 된다. 이러한 가동 정지시간을 최소화하고자 세그먼트 체결 중에도 가동할 수 있는 연속굴착형 TBM 기술이 개발되고 있다. 나선형 세그먼트의 굴진 반력을 확보하기 위해 추진잭을 개조하고 신뢰성을 확보하는 연구가 진행 중이다. 또한 체결 중 세그먼트를 제외한 나머지 부분의 추진잭을 가동하는 유압제어 및 유압시스템 설계기술이 개발될 예정이다. 본 보고는 연속굴착형 TBM 과제 중 부품개조 및 유압제어 기술에 대한 일부 내용을 소개한다.

• 지구물리와물리탐사
• /
• 제13권4호
• /
• pp.336-348
• /
• 2010

한-중 해저터널 후보지로 선정된 대천-원산도 지역의 부지조사를 위해 버블펄서(Bubble pulser) 음원을 이용한 단일채널 탄성파 탐사와 시추조사가 2008년 및 2009년에 수행되었다. 본 연구는 이 단일채널 탐사자료를 정밀 처리하고 시추자료와 연계하여 후보지역의 해저터널 안정성 평가와 시공설계에 필요한 기반암 심도 및 특성을 분석하는데 목적이 있다. 이를 위해 일반적으로 다중채널 탄성파자료에 적용되던 자료처리 기법 중 주파수-파수영역 필터링(F-K filtering)을 적용하여 교류전원잡음 등을 제거하고, 중합후 심도구조보정(post-stack depth migration) 기법을 적용하여 심도단면을 제작하였다. 수행 결과 단일채널 탄성파자료로부터 향상된 심도영역단면을 제작할 수 있음을 확인하였고, 시추자료와 통합 해석을 통하여 조사지역의 개략적인 기반암 분포와 지질특성을 파악할 수 있었다. 단층, 파쇄대 등의 세밀한 구조 파악은 버블펄서 음원과 단일채널 자료의 특성상 어려웠으나, 좀 더 해상도가 높은 탄성파자료가 있을 시 가능할 것으로 보인다. 이에 향후 해저터널 탐사 시 고해상자료를 얻기 위한 추천사항을 수록하였다.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.531-536
• /
• 2012

판토그라프 팬헤드의 공력소음 발생의 주요 인자와 영향을 미치는 변수를 분석하였다. 팬헤드 주변의 유체 유동과 결과적인 소음 방사를 분석하기 위해, 수치해석적인 방법 중 하나인 격자볼츠만 방법으로 팬헤드 단순모델을 사용했다. 풍동실험을 통해 측정된 결과로 시뮬레이션 결과를 검증했다. 와흘림이 주요한 공력소음 발생원인이며 Strouhal수, 유체의 속도 및 판토그라프의 형상에 영향을 받았다. 이 논문에 사용된 직사각형 형상을 통해 양력의 발생을 증가시키면서 방사 소음을 줄이는 팬헤드의 설계가 가능함을 제시하였다. 또한 통로나 유선 형상을 이용해 와흘림을 최소로 줄이면, 방사 소음을 크게 저감하는 형상의 설계가 가능함을 구축된 해석모델을 이용하여 검증하였다.

• 지구물리와물리탐사
• /
• 제14권2호
• /
• pp.146-151
• /
• 2011

시추공 탄성파 초동주시에 유입될 수 있는 잡음 중에서 주시토모그래피 결과에 심각한 영향을 미치는 체계적인 잡음인 송신원 종속적인 잡음과 수신점 종속적인 잡음을 해당기록의 정보정으로 산출하는 방법을 제안하였다. 이 방법은 공통 송신원 또는 공통 수신점 모음의 초동주시를 적합 하는 최소제곱근사 곡선으로부터 해당 송신점 또는 수신점 종속적인 정보정을 산출하는 방법이다. 제안한 방법의 적용성을 검토하기위하여 잡음제거 모의실험을 수행하였다. 대상 모델로 균질한 매질 내에 있는 소규모 터널모델을 설정하고, 파선추적법에 의하여 주어진 측선배열에 대한 초동주시를 산출하고 이 기록에 송신/수신점 종속적인 잡음을 첨가하고 이를 산출하는 실험을 수행하였다. 잡음의 rms가 이상대의 존재로 인한 최대 예상 주시지연의 25%인 경우, 제안한 방법을 7회 반복 시행함으로써 성공적으로 잡음을 추출할 수 있었다.

• 로봇학회논문지
• /
• 제7권3호
• /
• pp.205-215
• /
• 2012

A GPS sensor is widely used in many areas such as navigation, or air traffic control. Particularly, the car navigation system is equipped with GPS sensor for locational information. However, when a car goes through a tunnel, forest, or built-up area, GPS receiver cannot get the enough number of satellite signals. In these situations, a GPS receiver does not reliably work. A GPS error can be formulated by sum of bias error and sensor noise. The bias error is generated by the geometric arrangement of satellites and sensor noise error is generated by the corrupted signal noise of receiver. To enhance GPS sensor accuracy, these two kinds of errors have to be removed. In this research, we make the road database which includes Road Database File (RDF). RDF includes road information such as road connection, road condition, coordinates of roads, lanes, and stop lines. Among the information, we use the stop line coordinates as a feature point to correct the GPS bias error. If the relative distance and angle of a stop line from a car are detected and the detected stop line can be associated with one of the stop lines in the database, we can measure the bias error and correct the car's location. To remove the other GPS error, sensor noise, the Kalman filter algorithm is used. Additionally, using the RDF, we can get the information of the road where the car belongs. It can be used to help the GPS correction algorithm or to give useful information to users.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.61-66
• /
• 2015

In this study, an aero-acoustic analysis around pantograph of a high speed train is performed. Computational technique and grid system is validated with wind tunnel test result and unsteady acoustic pressure data are used for analyzing noise level of each part of pantograph. FLUENT is used for flow analysis and LES(Large Eddy Simulation) is applied for analyzing turbulent flow. For acoustic analysis, Ffowcs Williams-Hawkings(FW-H) acoustics model is used and it bring the aero-acoustic characteristic of pantograph. As the result, contact strip, knee, substructure of pantograph is confirmed as a main source of aero-acoustic noise and it is dealt in various frequencies. The result is expected to help building improved grid system.