• Journal of Technologic Dentistry
• /
• v.2 no.1
• /
• pp.69-75
• /
• 1980

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2009

The ground integration test of Smart UAV has been performed according to the flight test plan. The flight test of full scaled model will be performed followed by 4 DOF ground rig test and a tethered hover test. Smart UAV is the first indigenous tiltrotor aircraft which can fly with fast cruise speed and take off or land vertically. In order to prove the flight control law of Smart UAV, the 40% scaled airplane was developed and have been tested. During flight test of small scaled model, many unique and unexpected problems occurred. After clearing these problems, fully automatic flight test was performed successfully. The experiences about many trouble shooting and resolving the problems would be basic material to avoid the unexpected but similar flight test problems hidden behind of the full scaled Smart UAV. This paper presents the detailed procedures of trouble shootings to solve the unique problems which occurred during the flight test of small scaled tiltrotor UAV.

• Journal of Power System Engineering
• /
• v.4 no.2
• /
• pp.25-30
• /
• 2000

The grinding process is very complex and relates many parameters to control the process. As this reason, a theoretical analysis and a quantitative estimation of the grinding process has not been well established. In this study, the in-process monitoring system was suggested by applying the neural network for monitoring and shooting the malfunction of cylindrical plunge grinding process. This system used the power signals from the electric power meter. This neural network was composed of processing elements [4-(5-5)-3] with 4 identified power parameters. Because sensitivity is blunted some minute vibration components, the simulation result of this system has appeared about 10% erroneous recognition in the uncertain pattern and the average success rate of the trouble recognition was about 90%. Consequently, the developed system, which applied to the power signals, can be recognize enough to monitor the grinding process as in-process.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.118-123
• /
• 2002

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.27 no.1
• /
• pp.14-27
• /
• 1998

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.8
• /
• pp.351-356
• /
• 2014

Typical trouble patterns in solar thermal systems include working fluid leakage and freezing other than breakdown of pump. A fluid sensor for measuring electric resistance of fluid was developed and installed at the top of the collector piping in order to check the fault of solar system. Working fluid level in the pipe was determined by measuring electric resistance from a fluid sensor. On the base of this, it was confirmed that the fluid sensor diagnoses leakage of fluid. Electric resistance of propylene glycol aqueous solution was measured in the range of $0{\sim}70^{\circ}C$ and 0~40% of concentration. The response surface analysis was performed by using a central composite design, and the regression equation was derived from the relationship between electric resistance, temperature, and concentration. Through the experiment in a real solar system, we can estimate a concentration of working fluid when a pump is not operating and predict a possibility of freezing. Finally, an effective algorithm for trouble shooting was proposed to operate and maintain the solar system.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.48-57
• /
• 1995

연삭가공중에 발생하는 트러블의 인식과 처리는 공학적 원리에 입각한 방법과 현장 숙련기술자의 경험적 지식을 바탕으로한 방법이있다. 그러나, 연삭가공은 관계되는 가공변수가 많아, 이들 상호간의 관계를 정량적으로 규명할 수 없어 대부분이 숙련자의 지식에 의존하는 것이 현실정이다. 본 논문은 이와같은 점에 착안하여 원통연삭을 대상으로 현장숙련자가 갖고 있는 경험적이고도 정성적인 지식의 호과적인 활용을 위해 계층분석으로 도입하여 이들이 갖고 있는 노하우를 정량화하고, 아울러 공학적원리를 가미한 연삭가공을 트러블 진단. 처리 시스템을 구축하였다. 또한 시스템 구성에 신뢰성을 높이기 위해 폴트 진단 모델을 도입하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.27-43
• /
• 1991

연소 가공은 고품질 고정도를 필요로 하는 경우 매우 유효한 가공방법이지만 그 공정이 많은 Parameter에 의해 구성되기 때문에 동일한 조건에서도 정량적인 평가가 어려우므로 작업현장 에서는 과학적 원리와 공학적 지식 보다는 숙련자의 경험과 기능에 의존하고 있는 실정이다. 본 연구에서는 이와 같은 국면에 대처한 문제 해결을 위해 Computer가 인간사고에 근접 할 수 있도록 Fuzzy 이론과 Default 이론을 도입하고 전문가의 이론적 지식과 숙련자의 감각적 지식을 적극 수용 하여 연소용 Expert system (최적 가공 조건의 설정 System과 Trouble shooting system)을 개발하였다. 또한 연소 가공 Data의 불확실한 애매성을 효과적으로 이용 할 수 있도록 Fuzzy 가능성이론에 의해 가공 Datad을 회귀 분석하여 실가공 Data base에 축적시켜 재활용토록 설계하었으며 개발된 본 System 의 실행 결과 그 활용성이 높음을 입증하였다.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.4 s.17
• /
• pp.26-31
• /
• 2002

The heat produced by the fission in the fuel of HANARO, 30 MW of research reactor, was transferred from the primary cooling water to the secondary cooling water through heat exchangers. The secondary cooling water absorbing the heat was circulated by secondary cooling pumps and cooled through 33 MW of cooling tower. Each capacity of the three secondary cooling pumps was fifty percent ($50\%$) of full load. The two pumps were normally operated and the other pump was standby. One of the secondary cooling pumps has often made troubles by high vibration. To release these troubles the pump shaft has been re-aligned, the pump bearing has been replaced with new one, the shaft sleeve has been replaced with new one, the shaft and the impeller have been re-balanced representatively and/or the vibration of motor has been tested by disconnecting the shaft of pump. But the high vibration of pump cannot be cleared. We find out the weight balance trouble of the assembly in which the impeller is installed in the shaft. After clearing the trouble, the high vibration is relieved and the pump is operated smoothly. In this paper, the trouble solution shooting method of secondary cooling pump is described including the reason of high vibration