• Journal of Contemporary Eastern Asia
• /
• 제16권1호
• /
• pp.93-113
• /
• 2017

This study aimed to determine the changes in the local fiscal structure brought about by the change in the transaction tax, including the acquisition tax, by the central government. The review of the analysis results proved the following. First, the government's transaction tax exemption policy effectively influenced the expansion of the local fiscal budget. Transaction tax exemptions such as acquisition tax exemptions would not contribute to the expansion of the local fiscal budget in the short run, but may do so in the long run. Second, the review of the effect of the transaction tax exemption policy by the central government on the local fiscal structure confirmed that its impact on the local fiscal structure may vary depending on the timing of such tax exemption. Third, the overall local fiscal structure as a result of the transaction tax exemption by the central government was confirmed to have been influenced more by the fiscal capability of the local government than by the income level of the local residents. In conclusion, the stimulation of real estate transactions using tax tools may positively influence the overall fiscal structure of local governments, but it would also put pressure on the fiscal management of local governments because it is largely influenced by the fiscal capability of the local governments.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.93-101
• /
• 2016

This paper presents the surface discharge characteristics in Dry-Air on laminated epoxy solid dielectrics and conductive particles in order to provide the valuable information for the insulation design of eco- friendly gas insulated switchgear. To improve insulation performance, the three types of the laminated epoxy solid dielectrics were proposed, and it was revealed that their surface discharge characteristics were similar to the bakelite dielectrics of same-laminated types. From the surface discharge characteristics of dry air, it was demonstrated that the effect of conductive particles on surface discharge voltage was dominant when there are this particles at the shortest electrode gap and that the degradation of insulation performance on the conductive particles was evident in epoxy than teflon. These phenomena were interpreted in terms of particle-triggered discharge mechanism and electric field of triple junction, respectively.

• 대한통합의학회지
• /
• 제6권3호
• /
• pp.131-139
• /
• 2018

Purpose : The study objective was to assess the antibacterial activity of essential oil of basil against S. mutans and P. gingivalis and to explore its potential to prevent dental caries and peridontal disease. Method : Essential oil of basil, extracted using steam distillation, was diluted with triple distilled water and Tween 20 to generate samples at various concentration, that is 30%, 50%, and 70% (v/v). Strains of S. mutans and P. gingivalis were incubated in the medium under anaerobic condition. Broth microdilution susceptibility testing and plate incubation diffusion were utilized to determine the minimum inhibitory concentration (MIC) and to measure antibacterial activity, respectively. Result : An upsurge in antibacterial activity was seen to correlate with and increase in the concentration used for both bacterial strains, but was more significant with S. mutans. A statistically significant growth inhibition effect and reduction in the number of colonies was also observed with both strains dependent on the concentration used following 24 hours of incubation. Conclusion : Thus, the current study finding was that essential oil of basil was effective against dental caries and periodontal disease and could be used in dentifrice to help prevent oral disease.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.719-727
• /
• 1989

By using commercial zirconia powder CeO2-ZrO2 ceramics containing 8~16mol% CeO2 was made by heat treatment at 1350~155$0^{\circ}C$ for 1~10hr. The minimum amount of CeO2 for obtaining complete tetragonal phase was 12mol%, and in the tetragonal phase region fracture toughness of Ce-TZP was decreased with increasing CeO2 content and the maximum value was obtained when 12mol% CeO2 was added. The bending strength goes through maximum at 14mol% CeO2. Fracture mode of Ce-TZP transformed from intergranular to transgranular fracture with increasing CeO2 content, so the morphology of fracture surface of 16mol% Ce-TZP was wholly transgranular and this tendency was independent on grain size. The crystal structure of the 12mol% Ce-TZP was monoclinic with fringes along the grain boundaries which are lying in the particular plane from the TEM observation. The chemical composition of the sintered body was homogeneous as a whole and some amorphism or air pocket was observed at the triple junction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1416-1417
• /
• 2011

킹크효과를 억제할 수 있는 새로운 f-모양 트리플게이트 구조를 가지는 다결정실리콘 박막트랜지스터는 추가적인 공정과정 없이 제안 및 제작되었다. 이러한 다결정실리콘 박막트랜지스터의 채널에는 순차적인 횡방향 고체화(Sequential Lateral Solidification, SLS)나 CW 레이져 횡방향 결정화(CW laser Lateral Crystallization, CLC) 등과 같은 방법으로 제작된 횡방향으로 성장시킨 그레인이 있다. 이 소자의 전체적인 전류흐름은 횡방향으로 성장시킨 그레인 경계에 강력하게 영향을 받는다. f-모양 트리플게이트에는 횡방향으로 성장시킨 그레인과 평행한 방향으로 위치한 채널, 그리고 수직인 방향으로 위치한 채널이 있다. 이 소자는 f-모양 게이트 구조에서의 비대칭 이동도를 이용하여 다결정실리콘 박막트랜지스터의 킹크효과를 효과적으로 억제시킬 수 있다는 사실을 실험과 시뮬레이션을 통해 검증되었다. 우리의 실험 결과는 이 논문에서 제안된 f-모양 트리플게이트 박막트랜지스터가 기존의 박막트랜지스터와 비교할 때 더 효과적으로 킹크 효과를 감소시킬 수 있다는 것을 보여주었다. 또한 고온 캐리어 스트레스 조건에서의 신뢰성도 개선할 수 있음이 확인되었다.

• Journal of Astronomy and Space Sciences
• /
• 제12권2호
• /
• pp.179-195
• /
• 1995

RT Per has been known as a close binary of which the orbital period has unpredictably varied so far. Although there are no agreements with the working mechanism for the changes of the period, two interpretations have been suggested and waiting for to be tested: 1) light-time effects due to the unseen 3rd and 4rd bodies (Panchatsaram 1981), 2) Abrupt period-changes, due to internal variations of the system (e.g. mass transfer or mass loss) superimposing to the light-time effect by a 3rd body (Frieboes-Conde & Herczeg 1973). In the point of view that the former interprepation models could predict the behavior of the changes of the orbital period theoretically, we checked whether the recent observed times of minimum lights follow the perdictions by the first model or not. We confirmed that the observed times of minimum lights have followed the variations calculated by the light-times effects due to the 3rd and 4rd bodies suggested by Panchatsatam. In this paper a total of 626 times of minimum lights were reanalyzed in terms of the light-time effects by the 3rd and 4rd bodies. We concluded that the eclipsing pair in SVCam system moves in an elliptic orbit about center of mass of the triple system with a period of about $42.^y2$, while the mass center of the triplet is in light-time orbit about the center of mass of the quadruple system with a period of $120^y$. The mean masses deduced for the 3rd and 4rd bodies were $0.89m_\odot$ and $0.82m_\odot$, respectively.

• Wind and Structures
• /
• 제31권1호
• /
• pp.31-41
• /
• 2020

A new type of bridge deck section consisting of four-box decks, two side decks for vehicular traffic lanes and two middle decks for railway traffic, has been experimentally investigated for determining its aerodynamic properties. The eight flutter derivatives were determined by the Iterative Least Squares (ILS) method for this new type of four-box deck model, with two windshields of 30 mm and 50 mm height respectively. Wind tunnel experiments were performed for angles of attack α = ±6°, ±4°, ±2° and 0° and Re numbers of 4.85×105 to 6.06×105 and it was found that the four-box deck with the 50 mm windshields had a better aerodynamic performance. Also, the results showed that the installation of the windshields reduced the values of the lift coefficient CL for the negative angles attack in the range of -6° to 0°, but the drag coefficient CD increased in the positive angle of attack range. However, galloping instability was not encountered for the tested reduced wind speeds, of up to 9.8. The aerodynamic force coefficients and the flutter derivatives for the four-box deck model were consistent with the results reported for the Messina triple-box bridge deck, but were different from those reported for the twin-box bridge decks.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.795-806
• /
• 2017

According to the characteristics of continuous beam bridges, the relative displacement is too large to collision or even girder falling under earthquakes. A device named Cable-sliding Modular Expansion Joints(CMEJs) that can control the relative displacement and avoid collision under different ground motions is proposed. Working principle and mechanical model is described. This paper design the CMEJs, establish the restoring force model, verify the force model of this device by the pseudo-static tests, and describe and analyze results of the tests, and then based on a triple continuous beam bridge that has different heights of piers, a 3D model with or without CMEJs were established under Conventional System (CS) and Seismic Isolation System (SIS). The results show that this device can control the relative displacement and avoid collisions. The combination of isolation technology and CMEJs can be more effective to achieve both functions, but it need to take measures to prevent girder falling due to the displacement between pier and beam under large earthquakes.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.67-72
• /
• 2011

The aim of this study is to evaluate how much would the building energy consumption be saved by applying DSSC BIPV window which is possible to control the transmittance and express the color in the office building. For this, physical characteristics such as transmittance and reflectance, U-factor of DSSC areanalyzed and an annual energy consumption that is connected to dimming control is calculated when DSSC BIPV window is applied by alternate clear window system. As a result, It is possible to reduce the anannual energy consumption as much as4.1% by just change the clear double window system to DSSC BIPV double window system because the major factor to reduce energy consumption in the office that has much cooling load than other building is SHGC. When the thermal insulation properties of DSSC BIPV window with low-e coating and making triple window are improved, energy saving ratio is about 9%. Plus, energy saving ratio of 25~28% in lighting energy consumption is possible when the dimming control system with DSSC BIPV window is adopt.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1127-1134
• /
• 2007

It was demonstrated that Y[N(TMS)2]3, the neutral yttrium-diamine complex 13 and yttrium-NPS complexes 15 are efficient precatalysts for intramolecular hydroamination of aminoalkynes involving primary amines. Complex 13 and 15 were quantitatively prepared in situ by direct metalation of the ligands 4 and 9 with 1 equiv of Y[N(TMS)2]3 in benzene-d6 at 120 oC for 5 days and 10 days, respectively, via elimination of (TMS)2NH. 5-Exo- and 6-exo-dig intramolecular hydroamination of aminoalkynes using catalyst 12 and 13 proceeded smoothly to give nitrogen-contained cyclic products in good to excellent yields in all cases. In the case of 7- exo-dig intramolecular hydroamination, the desired product was produced in 41% and 48% yields despite the gem-dimethyl effect. However, treatment of catalyst 15 with aminoalkynes (19 and 22) having a methyl substituent at the carbon adjacent to triple bond and 6-exo-dig intramolecular hydroamination of 21 failed to give the desired products. Zirconium-catalyzed intramolecular hydroamination of aminoallenes (25, 27, and 31) with 5 mol% 16 afforded 2-(trans-1-propenyl)pyrrolidine, 2-isopropylenepyrrolidine, and 2-(trans-1- propenyl)piperidine in 96%, 95%, and 93% yield, respectively. However, subjecting 25 to 5 mol% 15 was unsuccessful to produce the desired product.