• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.56-64
• /
• 2011

In this paper, the characteristics of LCL set-up parameters for the satellite load distribution are analyzed under the electrical system environment, implemented the LCL circuits and evaluated the performance and its behaviour. Recently, it is implemented the load distribution circuit by latching current limiter(LCL) rather than conventional fuse and relay for the protection of the satellite power system from a fault load. The LCL circuit is composed of the electrical components, not mechanical parts with the fuse and relay. When detected the over current on a fault load, it is activated to maintain the trip-off level for set-up time and then cut-off the load power by the active control. It is more flexible and provided a chance to reuse of the load in case of temporarily event, but the fuse and relay can't be used again after activating due to the physical disconnection. However, for implementation of LCL circuit, it should be carefully considered the behavior of the LCL circuit under the worst electrical system environment and applied it to define the set-up parameters related with over-current inhibition.

• Journal of Korean Society of Transportation
• /
• v.18 no.2
• /
• pp.53-62
• /
• 2000

현재까지 개발된 교통량 기반 O/D 추정기법들은 추정된 O/D의 신뢰성을 평가하는 기준으로 통계적 오차분석을 통한 참O/D(true O/D)와 추정O/D간의 타이를 분석하는 방법이 주류를 이루었다. 문제는 이러한 오차분석기법들이 현실적인 대규모 교통망상에 적용될 때 탐O/D를 알 수 없을 뿐만 아니라, 알 수 있다고 하더라도 추정된 O/D와의 비교 평가시에 그러한 평가방법으로 추정된 O/D의 신뢰성을 부여하기에는 많은 문제점을 가지고 있다는 점이다. 통행조사에 의한 O/D는 비록 포함되어 있는 정보가 과거의 정보라고 할지라도 현재의 통행흐름에 대하여 가장 많은 정보를 가지고 있다고 할 수 있다. 즉, 선행O/D의 정보를 크게 변화시키지 않으면서도 관측교통량으로 O/D를 추정할 수 있는 방법이 이 관점에서 매우 뛰어난 추정방법이라고 할 수 있다. 이러한 관점에서 본 연구에서는 선행O/D정보 중 통행수요예측시 가장 중요한 지표의 하나인 통행시간빈도분포 (TriP Length Frequency Distribution:TLFD)를 이용하여 추정O/D의 신뢰성 지표로 삼았다. TLFD는 4단계 모형에서 통행분포(trip distribution)시 모형을 정산하는 데 사용되는 방법으로써 죤간 통행시간을 단위별로 나누어 조사된 통행시간분포와 추정된 O/D의 통행시간분포가 유사한 지를 살피는 방법이라고 할 수 있다. 조사된 TLFD와 추정O/D의 TLFD가 유사한 모양을 이를 때 추정O/D의 신뢰성이 높다고 인정한다. 또한 TLFD는 전통적으로 조사된 표본O/D를 전 수화하는데 이용되어 그 타당성 또한 많이 검증되어 왔다. 그러나 아직까지 TLFD를 가지고 교통량으로 O/D를 추정하는 모형의 결과를 검증한 연구 결과는 없는 실정이다. 따라서, 본 연구에서는 최종적인 이러한 분석결과를 평가할 수 있을 뿐 아니라, 평가된 지표가 신뢰할 만한 수준이 아니라면, 추정된 결과를 보정할 수 있는 가능성을 제시하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2279-2284
• /
• 2011

In most of radial distribution systems, the overcurrent protection coordination is adopted for the protection of apparatus and the improvement of electrical power system reliability. The protection coordination structure in distribution substation is composed of several circuit breakers(CB) with distribution lines originating from one substation bus under one transformer, which trip for their fault current. But sufficient analysis is necessary for the capacity of CB's in distribution systems with several distribution generations(DG). In this paper, a protection coordination method not to exceed the traditional capacity of CB's was proposed and certified through simulation by the PSCAD-EMTDC S/W.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.162-167
• /
• 2000

The warm deep drawability in square cup drawing is investigated about a newly developed high-strength steel sheet with retained austenite which is transformed into martensite during forming. For this investigation, six steps of temperature ranges, from room temperature to $250^{\circ}C$, and five kinds of drawing ratio, from 2.2 to 2.6 were adopted. As a result the maximum drawing force and the maximum drawing depth were affected by the elevated temperatures, and the more stable thickness strain distribution was observed to the elevated temperatures. But blue shortness happened over $200^{\circ}C$. The FEM analysis using the LS-DYNA code is adopted to compare the experimental results with the analytical results for thickness strain distribution.

• The Journal of Fisheries Business Administration
• /
• v.47 no.2
• /
• pp.33-41
• /
• 2016

The purpose of this study is to estimate the economic value of boat fishing experience marine tourism activity in Jeju Island's Chagwido. The economic value is estimated as consumer surplus using count data models including the truncated Poisson model and the truncated negative binominal distribution model. This study collects the effective 504 questionnaires from boat fishing experience tourists in Jeju Island's Chagwido. The truncated negative binominal distribution model was statistically more suitable and valid than other models. The truncated negative binominal distribution model was applied to estimate consumer surplus as economic value from boat fishing experience tourism activity in Jeju Island's Chagwido. A consumer surplus value per trip was estimated as about 209,900 won. The annual economic value from boat fishing experience tourism activity was estimated as 273,700 won in Jeju Island's Chagwido. Consequently, boat fishing experience marine tourism activity has a very large economic value in Jeju Island.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.21-30
• /
• 2012

Technology trend and application of laser fuse, anti-fuse, and eFUSE as well as the structure, programming mechanism, and reliability of eFUSE have been reviewed. In order to ensure eFUSE reliability in the field, a sensing circuit trip point consistent with the fuse resistance distribution, process variation, and device degradation in the circuit such as hot carrier or NBTI, as well as fuse resistance reliability must be considered to optimize and define a reliable fuse programming window.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.72_73
• /
• 2009

The industrial power system has the radial plant distribution system and domestic generators to supply the essential loads. When the system is isolated from the utility tie line, the system frequency drops resulting in the trip of generators. The load shedding scheme shall be properly designed to secure the essential load. In this paper two kinds of load shedding schemes, those are, the Fast Act Load Shedding(FALS) and Under Frequency Load Shedding(UFLS) are simulated and compared taking an example of petrochemical gas separation plant.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.9
• /
• pp.903-911
• /
• 1990

When load areas on a feeder are deenergized due to faults and scheduled outage, operators need to identify neighboring feeders, try to restore customers and minimize out-of-service areas. These cases include knowledge of system states and various constraints such as voltage drop. This paper concerns the load transfer in fault restoration and scheduled outage. Also, the operating constraints such as line current capacity, relay trip current, transformer capacity, voltage drop and line loss are considered. This expert system can propose the optimal load transfer method by analyzing the system state and considering the constraints.

• Journal of KIISE:Information Networking
• /
• v.37 no.1
• /
• pp.27-34
• /
• 2010

In this paper, we examine a long-range dependence in an active measurement of a network traffic which has been a well known characteristic from analyses of a passive network traffic measurement. To this end, we utilize RTT(Round Trip Time), which is a typical active measurement measured by PingER project, and perform a relevant analysis to a time series of both RTT and its volatilities. The RTT time series exhibits a long-range dependence or a 1/f noise. The volatilities, defined as a higher-order variation, follow a log-normal distribution. Furthermore, volatilities show a long-range dependence in relatively short time intervals, and a long-range dependence and/or 1/f noise in long time intervals. From this study, we find that the long-range dependence is a characteristic of not only a passive traffic measurement but also an active measurement of network traffic such as RTT. From these findings, we can infer that the long-range dependence is a characteristic of network traffic independent of a type of measurements. In particular, an active measurement exhibits a 1/f noise which cannot be usually found in a passive measurement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.33-41
• /
• 1982

Development is given for an analytical approach that can investigate parameters characterizing road network geometry. A grid transportation network having a hierarchy structure is considered on a homogeneous and isotropic urban plane in which trip origins and destinations are uniformly dispersed and the trip length distribution is independent of the location of the origin. The object is to find the optimal spacings between urban arterials so as to minimize the sum of travel and construction costs, subject to the hypothesis that a trip assignment follows the Wardrop's first principle. The proposed approach is not the genera method for determining an efficient network layout, but can be used as basic concept for generating and evaluating urban road network alternatives. Given an O-D table and cost estimates the approach is able to outline at least in a qualitative sense the optimal spacings of urban arterial roads.