• 융합신호처리학회논문지
• /
• 제9권2호
• /
• pp.141-145
• /
• 2008

길이가 서로 다른 평행선로에 전류가 흐르는 경우, 커먼모드 전류(Common mode current)에 의한 전자파의 방사가 일어난다. 이러한 방사 원리를 이용하여 경량, 소형의 길이가 다른 2소자 선형 안테나가 제안되어 있다. 그러나 이 안테나의 경우 선으로 결합된 구조를 가지기 때문에 제작에 있어서 많은 제약이 따른다. 본 논문에서는 선형 안테나의 단점을 개선하고, 제작과 설계가 용이한 평면 기판에 길이가 다른 2소자 평면 안테나를 설계하고, 광대역(UWB: Ultra Wide Band)의 특성을 가지는 안테나를 설계하였다. 그리고 안테나 소자에 삼각형 패치 S, 노치, 테이퍼를 설계함으로서 방사특성은 다이 폴 안테나와 비슷하나 보다 넓은 대역에서 동작하는 안테나를 제작 할 수 있었다. 그 결과 비대역($VSWR{\le}2$)이 약 58%가 되었다.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.874-879
• /
• 2016

본 논문에서는 직사각형 및 삼각형 기생 패치를 이용한 광대역 마이크로스트립 패치 안테나를 제안하였다. 직사각형 마이크로스트립 패치 위에 직사각형 및 삼각형 모양의 기생 패치들을 적층하여 860MHz대역에서 광대역 특성을 얻었다. 주 방사부인 마이크로스트립안테나와 기생 패치와의 효과적인 결합은 이들 사이에 두꺼운 공기층을 두어 구현하였다. 또한, 이들 공기층 두께와 기생 패치의 위치는 광대역 정합에 중요한 요소임을 알 수 있었다. 제안된 안테나는 향후 소형 트랜시버에 적용하기 위해 $119mm{\times}109mm$ 크기의 소형 접지면 위에 설계 및 제작되었다. FR4기판에 제작된 안테나의 임피던스 대역은 818~919MHz(11.7%)이다. 방사패턴은 기존 마이크로스트립 패치 안테나와 유사했으며, 최대 이득은 주파수 824MHz에서 2.11dBi로 측정되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1564-1569
• /
• 2007

This study concerns an advanced NURBS surface reconstruction method, which is based on the NURBS surface model fitting to the unstructured point cloud measured from an arbitrary complex shape. The concept of generating a simple triangular mesh model was introduced to generate a quadrilateral mesh model well-representing the topological characteristics of point cloud. The NURBS surface reconstruction processes required the use of the various methodologies such as QEM algorithm, merging scheme of pair-wise triangular mesh, creation algorithm of $G^1$ continuous tensor product NURBS surface patch, and so on. The effectiveness and reliability of the proposed NURBS surface reconstruction method were validated through the simulation results for the geometrically and topologically complex shapes.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.137-147
• /
• 2014

The present paper deals with the first ply failure analysis of the laminated composite plates under various static and dynamic loading conditions. Static analysis has been carried out under patch load and triangular load. The dynamic failure analysis has been carried out under triangular pulse load. The formulation has been carried out using the finite element method and a computer code has been developed. The first order shear deformation theory has been applied in the present formulation. The displacement time history analysis of laminated composite plate has been carried out and the results are compared with those published in literature to validate the formulation. The first ply failure load for laminated composite plates with various lamination schemes under static and dynamic loading conditions has been calculated using various failure criteria. The failure index-time history analysis has also been carried out and presented in this paper.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.587-591
• /
• 1996

Usually triangular patches are used to transfer geometric shape in Rpaid Prototyping CAM system. STL, a list of triangles, is de facto in RP industry. Because STL has no topology data, it can cause errornous results. So, STL should be verified before using. After adding support structures to anchor the part to the platform and to prevent sagging or distortion, slicing and layer by layer manufacturing process are done. But triangular patch is surface model and cannot provide dufficient information on geometry in the above processes. So, geometric modeling is necessary in verifying STL, adding support structures, and slicing. It is natural that triangle based modeling is the best when traingular patches are used as input. Considering support structures, solid and faces coexist in RP process. Therefore non-manifold modeler is required. In this study, triangle based non-manifold geometric modeling is proposed for RP system consitent with STL input.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.129-134
• /
• 1998

STL which is used in Rapid Prototyping is composed of a lot of triangular facets. The number of triangles and the shapes of these triangles determine the quality of STL. Therefore, proper algorithm is necessary to enhance the quality of triangular patch. In this paper we used the Delaunay triangulation method to apply to following processes. 1) On processing for reducing sharp triangles which cause errors on intersection. 2) On processing for connecting two or more collinear edges. 3) On processing for deleting unnecessarily inserted points in coplanar polygon.

• 소성∙가공
• /
• 제13권1호
• /
• pp.90-101
• /
• 2004

An inverse mosaic method has been proposed to generate an initial blank shape from the final product shape. Differently from the geometric mapping method, the method can handle triangular patches. However, the generated blank shape is strongly dependent on the order of determination of nodes. In order to compensate the dependency error smoothing technique has been also developed. Although the accuracy has been improved greatly compared with the geometrical mapping method, the method has limitation, due to the no incorporation of plasticity theory. Even though the accuracy of the radius vector method is already proved. the method requires initial guess to start the method. In order to compromise the limitation of the present method and the radius vector method, the method has been connected to the radius vector method. The efficiency of the present optimal blank design method has been verified with some chosen examples.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.205-212
• /
• 2003

Many people are exposed to accidents by vehicles or sports. The most frequent injuries by these accidents is concerned with a knee joint. The three-dimensional surface model of a knee is needed for dynamic analysis of knee motion and knee reconstruction. three-dimensional motion data of a knee joint were obtained using X-ray and precise magnetic sensors. The surface data of a femur and a tibia were obtained using cross-sectional pictures by CT. The three-dimensional surface models of a femur and a tibia were made by the method of optimal triangular patch. Using obtained motion data, we simulated the motion of three-dimensional knee joint model.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.136-144
• /
• 1997

Usually triangular patches are used to transfer geometric shape in Rapid Prototyping CAM system. STL, a list of triangles, is de facto standard in RP industry. Because STL does not have topological infoma- tion, it can cause errornous results. So STL should be verified before using. After adding support structures to anchor the part to the platform and to prevent sagging or distortion, slicing and layer by layer manufactur- ing process are done. But triangular patch is surface model and cannot provide sufficient information on geometry in the above processes. So, geometric modeling is necessary in verifying STL, adding support structures and slicing. It is natural that triangle based modeling is the best when tringular patches are used as input. Considering support structures, solid and faces coexist in RP process. Therefore non-manifold modeler is required. In this study, triangle based non-manifold geometric modeling is proposed for RP sys- tem consistent with STL input.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1282-1290
• /
• 2000

모서리-절단 사각형 패치를 격자 형태로 배열하고 순차 회전 기법을 이용하여 위성방송수신 대역에서 동작하는 LHCP 원형 편파 안테나를 설계한다. 삼각형 격자 현태의 순차 회전 기법을 사용한 안테나는 축비 대역폭, 교차 편파 특성등을 개선하는 효과가 있으며, 급전 선로에 의한 방사를 최소로 하여 방사 패턴에 미치는 영향을 줄일 수 있다. 설계된 안테나는 $\Phi$45$^{\circ}$평면에서 DBS 배열 안테나의 부엽 준위 규격(-27dB)과 교차 편파 준위(-20dB)를 만족하고 있다.