• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.773-775
• /
• 2003

From the view point of data fusion, we integrate LIDAR data and digital aerial images to perform 3D building modeling in this study. The proposed scheme comprises two major parts: (1) building block extraction and (2) building model reconstruction. In the first step, height differences are analyzed to detect the above ground areas. Color analysis is then performed for the exclusion of tree areas. Potential building blocks are selected first followed by the refinement of building areas. In the second step, through edge detection and extracting the height information from LIDAR data, accurate 3D edges in object space is calculated. The accurate 3D edges are combined with the already developed SMS method for building modeling. LIDAR data acquired by Leica ALS 40 in Hsin-Chu Science-based Industrial Park of north Taiwan will be used in the test.

• Journal of applied mathematics & informatics
• /
• v.34 no.1_2
• /
• pp.145-156
• /
• 2016

It is known that certain convolution sums can be expressed as a combination of divisor functions and Bernoulli formula. In this article, we consider relationship between fifth-order combinatoric convolution sums of divisor functions and Bernoulli polynomials. As applications of these identities, we give a concrete interpretation in terms of the procedural modeling method.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.149-152
• /
• 2000

3차원 물체 형상 모델링은 인식에 있어서 중요한 역할을 차지하고 있다. 기존의 픽셀(pixel)기반 영상표현은 물체 고유의 유기적 구조를 반영할 수 없고, 에지(edge)나 기반 물체 표현법은 물체의 자세한 표현이 가능하지만 물체인식을 위해서는 많은 양의 속성들을 만들어내게된다. 따라서 물체인식을 위해서는 물체의 형상특징을 직선적으로 기술할 수 있는 체적소 기반 물체 표현 방법이 필요하다. 본 논문에서는 몇 개의 파리미터를 이용하여 3차원 정보를 효과적으로 얻을 수 있는 superquadric과 이를 기본 단위로 한 CSG(Constructive Solid Geometry) tree를 이용하여 3 차원 물체 형상모델링에 대해서 기술한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.433-439
• /
• 1998

In this paper, we present an approach to the structure identification based on the input space partition methods and to the parameter identification by hybrid learning method in neuro-fuzzy system. The structure identification can automatically estimate the number of membership function and fuzzy rule using grid partition, tree partition, scatter partition from numerical input-output data. And then the parameter identification is carried out by the hybrid learning scheme using back-propagation and least squares estimate. Finally, we sill show its usefulness for neuro-fuzzy modeling to truck backer-upper control.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.436-439
• /
• 2010

본 논문에서는 Ubiquitous Computing 환경 하에서 이종 시스템 간의 통합을 위한 데이터 관리 기법 모델을 제안하였다. 이종 시스템 간의 통합이 이루어지면 방대한 양의 데이터를 모든 시스템이 공유해야 하기 때문에 무분별한 데이터의 중복과 저장으로 인해 프로세스의 데이터 처리 성능 및 데이터 무결성을 보장받지 못 하는 등의 문제점이 발생한다. 이를 보완하기 위해 Minimal cost Spanning tree의 원리를 적용하여 시스템 통합에 따른 데이터 처리 및 무결성 문제 해결을 위한 메커니즘을 제시하고자 한다.

• Korean Journal of Acupuncture
• /
• v.33 no.3
• /
• pp.102-113
• /
• 2016

Objectives : This study is aimed at developing and discussing the prediction model of blood stasis pattern of traditional Korean medicine(TKM) using machine learning algorithms: multiple logistic regression and decision tree model. Methods : First, we reviewed the blood stasis(BS) questionnaires of Korean, Chinese, and Japanese version to make a integrated BS questionnaire of patient-reported outcomes. Through a human subject research, patients-reported BS symptoms data were acquired. Next, experts decisions of 5 Korean medicine doctor were also acquired, and supervised learning models were developed using multiple logistic regression and decision tree. Results : Integrated BS questionnaire with 24 items was developed. Multiple logistic regression models with accuracy of 0.92(male) and 0.95(female) validated by 10-folds cross-validation were constructed. By decision tree modeling methods, male model with 8 decision node and female model with 6 decision node were made. In the both models, symptoms of 'recent physical trauma', 'chest pain', 'numbness', and 'menstrual disorder(female only)' were considered as important factors. Conclusions : Because machine learning, especially supervised learning, can reveal and suggest important or essential factors among the very various symptoms making up a pattern identification, it can be a very useful tool in researching diagnostics of TKM. With a proper patient-reported outcomes or well-structured database, it can also be applied to a pre-screening solutions of healthcare system in Mibyoung stage.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.2
• /
• pp.29-38
• /
• 2007

This study was undertaken to investigate the variation of equilibrium moisture content (EMC) in transverse direction and three different directional (longitudinal, radial, and tangential) linear movements, and diffusion coefficients within a tree disc of Korean red pine (pinus densiflora). The EMC gradually increased in heartwood from pith. Therefore, the chemical components might differ even in heartwood and the radial variation in EMC might have a close relationship with the cellulose content within a cross section. The specific gravity increases gradually from pith and the porosity has not direct influence on the variation of EMC within a tree disk. Both the radial and tangential diffusion coefficients exhibited clear trend of increase from pith. The EMC change (${\Delta}EMC$) and tangential diffusion coefficient were close to be axisymmetrical but others were deviated from axisymmetry. The diffusion coefficient decreases with decreasing an activation energy and specific gravity, The diffusion coefficient increased with increasing ${\Delta}EMC$ and hygroscopicity of wood might be inversely proportional to the activation energy, The fJEMC may depend on the chemical constituents of cellulose, hemicellulose and lignin. As the number of sorption sites and sorption capacity of wood increase, therefore, it might be assumed that the hygroscopicity of wood increases while activation energy decreases. Modeling physico-mechanical behavior of wood, the variations should be considered to improve the accuracy.

• Journal of Korean Academy of Nursing
• /
• v.49 no.5
• /
• pp.575-585
• /
• 2019

Purpose: The purpose of this study was to develop predictive models for pressure ulcer incidence using electronic health record (EHR) data and to compare their predictive validity performance indicators with that of the Braden Scale used in the study hospital. Methods: A retrospective case-control study was conducted in a tertiary teaching hospital in Korea. Data of 202 pressure ulcer patients and 14,705 non-pressure ulcer patients admitted between January 2015 and May 2016 were extracted from the EHRs. Three predictive models for pressure ulcer incidence were developed using logistic regression, Cox proportional hazards regression, and decision tree modeling. The predictive validity performance indicators of the three models were compared with those of the Braden Scale. Results: The logistic regression model was most efficient with a high area under the receiver operating characteristics curve (AUC) estimate of 0.97, followed by the decision tree model (AUC 0.95), Cox proportional hazards regression model (AUC 0.95), and the Braden Scale (AUC 0.82). Decreased mobility was the most significant factor in the logistic regression and Cox proportional hazards models, and the endotracheal tube was the most important factor in the decision tree model. Conclusion: Predictive validity performance indicators of the Braden Scale were lower than those of the logistic regression, Cox proportional hazards regression, and decision tree models. The models developed in this study can be used to develop a clinical decision support system that automatically assesses risk for pressure ulcers to aid nurses.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2121-2142
• /
• 2011

In this paper, we propose an e-Learning process control model that aims to graphically describe and automatically generate the manifest of sequencing prerequisites in packaging SCORM's content aggregation models. In specifying the e-Learning activity sequencing, SCORM provides the concept of sequencing prerequisites to be manifested on each e-Learning activity of the corresponding tree-structured content organization model. However, the course developer is required to completely understand the SCORM's complicated sequencing prerequisites and other extensions. So, it is necessary to achieve an efficient way of packaging for the e-Learning content organization models. The e-Learning process control model proposed in this paper ought to be an impeccable solution for this problem. Consequently, this paper aims to realize a new concept of process-driven e-Learning content aggregating approach supporting the e-Learning process control model and to implement its e-Learning process modeling system graphically describing and automatically generating the SCORM's sequencing prerequisites. Eventually, the proposed model becomes a theoretical basis for implementing a SCORM-based e-Learning process management system satisfying the SCORM's sequencing prerequisite specifications. We strongly believe that the e-Learning process control model and its modeling system achieve convenient packaging in SCORM's content organization models and in implementing an e-Learning management system as well.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.364-371
• /
• 2019

This study was conducted to provide the basic information for a reasonable forest management plan and sustainable forest management by developing a dominant tree height growth model using diameter at breast height (DBH) and site index curves for Pinus densiflora and Chamaecyparis obtusa growing in Jeolla-do. The altitude, slope, orientation, soil type, height and DBH of a dominant tree, and the ages of trees were measured for 3055 Pinus densiflora trees (611 plots) and 3345 Chamaecyparis obtusa trees (699 plots), and these data were used to develop a customized afforestation map. In the dominant tree height growth model, the relationship to DBH was used in the Petterson, Michailow, and log equations. Also, a dominant tree height growth model in relationship to age used the Chapman-Richards, Schumacher, and Gompertz equations. The Petterson equation, which has a lower mean square error, was used to model dominant tree height growth in relationship to DBH. In the model of dominant tree height growth in relationship to age, three kinds of equations were considered to have little statistical difference. Therefore, the Chapman-Richards equation was chosen for modeling on the national level. Thirtyyears was used as the base age, which is an important factor for estimating the site index curves. In the results, a more varied range of site index family curves with 6-18 was developed for Pinus densiflora, and with 6-22 for Chamaecyparis obtusa. As the new site index curves indicated influences on growth of Pinus densiflora and Chamaecyparis obtusa, a reasonable forest management plan will be possible in the future for Jeolla-do.