• Journal of the Korean Geographical Society
• /
• v.44 no.2
• /
• pp.176-186
• /
• 2009

Transportation policy to facilitate the public mode use is of the foremost importance to the local governments of Metropolitan Seoul, regarding the economic and environmental consequences of the increasing use of car. Understanding the travel behaviour is essential to the establishment of proper policy to guide more people to the use of public modes instead of private. The paper reports a result of sequential analysis of individual travel behaviour in Metropolitan Seoul, using a multi-dimensional motif search technique applied to Smart Card data that integrates individuals' different public mode uses. Groups of travel patterns with similar sequential information identified distinctive travel behaviour between Seoul north and south and between metro and bus uses. Travel patterns are more bounded within north Seoul and south Seoul respectively than crossing Han River between north and south. Within north and south, travel patterns visiting northern CBD and southern CBD, respectively, as well as their local neighbour in north and south, often use metro and metro-local bus combination, while travel patterns visiting only the north and south locals without CBDs more use only the local bus line and even only the areal bus line.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.19-32
• /
• 1999

In this study, the trip characteristics of workers in the city are systematically analyzed. The trip behaviors and socioeconomic characteristics of workers are analyzed using Person Trip Survey Data of 1988 and 1992 in Taegu Metropolitan area. With the results of behavioral analyses, the daily travel pattern of workers is shown as one tour contained two trips and it is relatively simple and stable. Also the rate using the same mode in a day is Presented as high ratio. So, it can be explained that the choice of worker\`s first trip is fixed his/her travel mode for his/her daily travel mode. Based on these analyses, the mode choice model for workers is developed by applying the Multi-nominal Logit Model with the choice set of bus, taxi, and car. The explanatory variables of this model include sex, age, auto, travel time, and cost. Empirical tests of the model show encouraging results. After that, the temporal transferability of the model is examined by the Pairwise t-test and five indexes far the model of 1988 and 1992. The results of examination are satisfied with each significance level of the explanatory variables and five indexes. Therefore. it can be concluded that the temporal transferability of this model developed in this study is resonable.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.7-16
• /
• 2008

There are unique aspects of truck vehicle movements compared with the personal travel in trip chaining. This paper reports an analysis on the truck vehicle trip chaining which intercity/metropolitan/intraregional trips are classified. Data collected from the travel dairy survey is used the truck trip-chaining analysis. The pattern of trip chaining classes is classified by the GIS mapping based on orgin-destination trip information. The physical index and efficiency index for each trip diary is used to the truck vehicle activity. Truck trips lengths and time differs from its truck type, service type and travel patterns. It is shown that the efficiency of the truck trip chaining depends on vehicle types and its delivery patterns. There are many other topics for research on trip chaining modeling such as the classification of trip chain, time use and mode choice by trip chaining.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.131-141
• /
• 2008

The objective of this study is to propose methods for determining optimal representative value and the optimal size of historical data for reliable travel time forecasting. We selected values with the smallest mean of forecasting errors as the optimal representative value of travel time pattern data. The optimal size of historical data used was determined using the CVMSE(Cross Validated Mean Square Error) method. According to the results of applying the methods to point vehicle detection data of Korea Highway Corporation, the optimal representative value were analyzed to be median. Second, it was analyzed that 60 days' data is the optimal size of historical data usedfor travel time forecasting.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.4
• /
• pp.615-627
• /
• 2012

This study analyzed the travel pattern with respect to use of public transportation by using transportation card data and presented the measures that can be used in a traffic policy. Transportation card data targeted Gyeonggi-Do area and as a utilization plan, a scenario that when a traffic policy decision maker improves bus stop facilities, the person selects a target site by using several variables that can be obtained from transportation card data was set and analyzed. The analysis result showed that K means cluster analysis which is decision making methodology and CHAID(Chi-squared automatic interaction detection) were used and it can be used usefully in policies in significance level of p <0.01. Also, based on these results, this study presented policy implications to be improved to actually use transportation card data in policies.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.413-418
• /
• 2020

The travel pattern of tourists for the development of the tourist course is designed to collect and analyze tourist information based on the big data of the carrier to improve the quality of the tourist course. In particular, the analyzed data is used to derive empirical data that can estimate the effect of tourists' inflow into tourism, and to utilize the information as basic data for the development of the tourist course. In addition, the travel pattern of tourists for the development of regional tourism courses is to collect and analyze information on the route and duration of tourists' travel based on big data collected by telecom operators, credit card companies and other data to improve the quality of tourist course development, and to derive empirical data to estimate the effect of tourist inflow through the analyzed data, based on the characteristics of the tourism course and the data needed for the development of new tourist courses in the future.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.451-460
• /
• 1998

The objectives of this study Is to evaluate the total runoff yield, peak flow and peak flow travel time depending on the urbanization, return period and rainfall patterns at the downstream of Manchon urban watershed in TaeGu City. SWM(Storm Water Management Model) is used for runog analysis based on 5 different steps of urbanization and 4 different types of Hufrs quartile according to 8 return periods. It is analyzed that the order of total runoff yield according to raiun patterns is Huffs 4, Huffs 2. Huffs 3 and Huffs 1 quartile, that of peak flow magnitude is Huffs 2, Huffs 1, Huffs 4 and Huffs 3 quartile at present development ratio. under the 60, 70, 80 and 90ft of urbanization to the 50% of urbanization by means of the rainfall patterns, the mean Increasing ratio of total runoff yield for each case is 4.55, 11.43, 16.07 and 20.02%, that of peak flow is 5.82, 13.61, 17.15 and 18.83%, the mean decreasing ratio of peak flow travel time Is 0.00, 2.44, 5.07 and 6.26%, the mean increasing ratio of runoff depth Is 4.51, 11.42, 16.02 and 20.05% respectively. the mean increasing ratio of total runoff yield by means of each and 19.71%. Therefore, as the result of this study. it can be used for principal data as to storm sewage treatment and flood damage protection planning in urban small watershed.

• Journal of Wetlands Research
• /
• v.8 no.1
• /
• pp.73-82
• /
• 2006

In this study, the hydraulic channel routing model is applied to analyze water surface elevation pattern on the Nakdong river in flood cases. The procedure to apply FLDWAV model is presented to solve the Saint-Venant Equations by using four points implicit finite differential scheme. And the flood travel time is studied for reasonable dam management. As this results, variable assumption and constraint are followed to evaluate flood travelling time by hydraulic model. A guideline of reasonable dam's decision making considering downstream effect is showed by this constructed model, and scientific hydraulic analysis is possible by it.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.263-271
• /
• 2023

In the (3,3) close combat model based on the Lanchester Square Law, this study proposes a plan to optimally allocate residual combat power after the battle to other battlefields. As soon as the two camps of three units can grasp each other's information and predict the battle pattern immediately after the battle began, the Time Zero Allocation of Force (TZAF) scenario was used to initially allocate combat power to readjust the combat model. It reflects travel time, which is a "field friction" in which physical distance exists from battlefields that support combat power to battlefields that are supported. By developing existing studies that try to examine the effect of travel time on the battlefield through the combat model, this study forms a (3,3) combat model, which is a large number of minimum units. In order to achieve the combat purpose, the principle of optimal combat force operation is presented by examining the aspect that support combat power is allocated to the two battlefields and the consequent battle results. Through this, various scenarios were set in consideration of the travel time and the situation of the units, and differentiated results were obtained. Although the most traditional, it can be used as the basic logic of the training or the commander's decision-making system using the actual war game model.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.6
• /
• pp.119-126
• /
• 2004

The welding characteristics of Inconel 600 Alloy using a continuous wave Nd:YAG laser are experimentally investigated. The major process parameters studied in the present laser welding experiment were the positions of focus, laser power and travel speed of laser bean We measured the fusion zone size and its shape using an optical microscope for the observation of cross-sectional area. We performed two tests regarding the tension and the micro hardness for welding quality estimation. Then we measured residual stress in welds by electronic speckle pattern interferometry(ESPI). In conclusion the optimum butt welding process parameters were 0.5mm focus position, 1.6kW laser power, 1m/min travel speed and 5.5$\ell$/min assist gas discharge.