• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.203-211
• /
• 2001

This paper presents load transfer efficiency of skewed transverse joint of jointed concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometry, loading, material similitude, which are variables to the skew angel of transverse joint. As the test results by fatigue load 700kgf applied, the deflection and stress of transverse joint were decreased as to increasing of skew angle of transverse joint. In addition, load transfer efficiency of transverse joint with skew angle is better than the load transfer efficiency of transverse joint without skew angle.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.46-52
• /
• 1987

The mechanism of transverse shrinkage for the butt joint weldig of plates is investigated in this paper. It was certified that the compressive plastic strain due to thermal expansion of materials during heating play an important role on the transverse shrinkage. It was also pointed out that the transverse shrinkage has to be treated with the samples of which the shapes are as close to real shapes of welded materials as possible, because the distribution of temperature and relative rigidity of materials during welding have great influence on the transverse shrinkage. The formulas for the calculation of transverse shrinkage were presented and the experiments were carried out in order to verify the formulas. the main results are as follows; 1. For the bead-on-plate welding, the transverse shrinkage in the begining parts of welding is the smallest, the end parts is next and the transverse shrinkage of mid section is the largest. 2. In bead-on-plate welding, the equations presented in this paper concerning transverse shrinkage coincide fairly well with the experimental values generally. 3. Transverse shrinkage increases generally as specific heat input per unit thickness increaes.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.49-56
• /
• 1999

Welding is a reliable process and is mainly adopted for fabricating heavy structures. Recently, transverse cracks in the weld metal is serious problem, and they affect cost, efficiency, safety and joint reliability for various welded structures. In this view of point, this study investigated the potential factors for weld metal transverse crack. The main results obtained are as follows; 1) The content of diffusible hydrogen in the commercial flux cored are welding wire was remarkable change by manufacturer. 2) The diffusible hydrogen content was thd main factor for weld metal transverse cracks. 3) Weld metal was immune to transverse cracking under the condition of low diffusible hydrogen content of high restraint condition. 4) The factors for weld metal transverse crack would be the content of diffusible hydrogen and restraint of weld joint.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.8-14
• /
• 2002

This is the first of two part series on experimental studies of grout type transverse joints. In this study, grout type transverse joints between precast concrete slabs are statically tested to determine the cracking loads and ultimate shear capacities of the grout type transverse joints. The tests are performed with a loading equipment designed and constructed especially in the lab to induce shear failures on the joints of the test specimens. Shape of the transverse joints, grouting materials and amount of prestress are selected as test parameters for the study. The results indicate that epoxy is an excellent grouting material which can be used in limited locations where large tensile stress is acting on the slab. Longitudinal prestressing is also an effective method to increase the shear strength of the transverse joints. A rational method to estimate the cracking and ultimate loads for the design of grout type transverse joints is proposed based on the static loading tests. Success of the tests with shear loading equipment allowed continuing the research further onto the fatigue strength of the grout type joints, which will be presented in the second part of the paper.

• 대한수학회보
• /
• 제29권1호
• /
• pp.73-80
• /
• 1992

We discuss transverse harmonic fields on compact foliated Riemannian manifolds, and give a necessary and sufficient condition for a transverse field to be a transverse harmonic one and the non-existence of transverse harmonic fields. 1. On a foliated Riemannian manifold, geometric transverse fields, that is, transverse Killing, affine, projective, conformal fields were discussed by Kamber and Tondeur([3]), Molino ([5], [6]), Pak and Yorozu ([7]) and others. If the foliation is one by points, then transverse fields are usual fields on Riemannian manifolds. Thus it is natural to extend well known results concerning those fields on Riemannian manifolds to foliated cases. On the other hand, the following theorem is well known ([1], [10]): If the Ricci operator in a compact Riemannian manifold M is non-negative everywhere, then a harmonic vector field in M has a vanishing covariant derivative. If the Ricci operator in M is positive-definite, then a harmonic vector field other than zero does not exist in M.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.199-206
• /
• 2003

This paper presents the fatigue life of transverse joint of concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometric load, material similitude, which are variables to the skew angel of transverse joint. From the test results by fatigue load 700kgf applied, we can have that the fatigue life of transverse joint with skew angle is better than that of transverse joint without skew angle. In addition, we can have that the fatigue life of skewed transverse joint with angle of 10 degree is better than that of skewed transverse joint with angle of 20 degree.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1596-1603
• /
• 2018

This paper presents the new design and validation process of the linear transverse flux machine of the stelzer machine for hybrid vehicle application. A linear transverse flux machine is a novel electric machine that has higher force density and power than conventional electric machine. The process concentrates on 2-dimensional and 3-dimensional analysis using equivalent magnetic circuit method considering leakage elements and it is verified by finite element analysis. Besides the force characteristics of all axis of each direction are analyzed. The study is considered by dividing the transverse flux electric excited type and the transverse flux permanent magnet excited type. Additionally three-dimensional analysis in this machine is accomplished due to asymmetric structure with another three axes. Finally, it suggests the new design and validation process of linear transverse flux machine for stelzer machine.

• PNF and Movement
• /
• 제9권4호
• /
• pp.41-48
• /
• 2011

Purpose : The purpose of this study was to assess the tibialis anterior, soleus, gluteus maximus, transverse abdominis muscle activity of tibialis anterior, soleus, gluteus maximus, transverse abdominis according to pronated foot and supinated foot. Methods : Group of pronation and supination were taped using augmented low-day method to make pronated and supinated foot the three case were assessed by agnostic radiology for investigating foot structure. Results : 1) When supinated foot & pronated foot, tibialis anterior & gluteus maximus muscle activity was augmented in one step. 2) When supinated foot & pronated foot, soleus & transverse abdominis muscle activity was decreased in one step. 3) When supinated foot & pronated foot, tibialis anterior & gluteus maximus muscle activity was augmented in squat. 4) When supinated foot & pronated foot, soleus muscle activity was decreased in squat. 5) When pronated foot, transverse abdominis muscle activity was decreased in squat. 6) When supinated foot, transverse abdominis muscle activity was augmented in squat. 7) When pronated foot, transverse abdominis & gluteus maximus & tibialis anterior muscle activity was augmented in sit to stand. 8) When supinated foot, transverse abdominis & gluteus maximus & tibialis anterior muscle activity was decreased in sit to stand. 9) When supinated foot & pronated foot, soleus muscle activity was decreased in sit to stand. Conclusion : 1) Pronated foot & supinated foot effects on soleus, gluteus maximus, transverse abdominis muscle activity in one step. 2) Pronated foot & supinated foot effects on tibialis anterior, gluteus maximus, transverse abdominis muscle activity in squat. 3) Pronated foot & supinated foot effects on soleus, transverse abdominis muscle activity in sit to stand. Therefore we suggest the deformity of the foot effects on tibialis anterior, soleus, gluteus maximus, transverse abdominis muscle activity.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.57-67
• /
• 1999

Welding is widely applicable and reliable process and is mainly adopted for fabricating heavy structures. Recently, weld metal transverse cracks in butt and fillet weld joint is a serious problem, and they must be eliminated for improving weld joint reliability. The weld metal transverse crack susceptibility of butt and fillet joint was carried out by cantilever type tensile crack testing jig and CTS test. In this view of point, this study investigated the potential factors for weld metal transverse crack. The main results obtained were as follows: 1. The content o fdiffusible hydrogen in weld metal played an important role for weld metal transverse cracks. 2. From cantilever type tensile crack tests, it was pointed out that the higher the diffusible hydrogen content and tensile restraint, the more susceptible to weld metal transverse craking. 3. The TSN(thermal severity number) and diffusible hydrogen were important factors for determining weld metal transverse cracks in fillet weld joints.

• Advances in concrete construction
• /
• 제14권2호
• /
• pp.79-92
• /
• 2022

The amount and configuration of transverse reinforcement are known as critical parameters that significantly affect the lateral confinement of concrete, the ductility capacity, and the plastic hinge length of RC columns. Based on test results, this study investigated the effect of the three variables on structural indexes such as neutral axis depth, lateral expansion of concrete, and ductility capacity. Five reinforced concrete column specimens were tested under cyclic flexure and shear while simultaneously subjected to a constant axial load. The columns were reinforced by two types of reinforcing steel: rectangular hoops and spiral type reinforcing bars. The variables in the test program were the shape, diameter, and yield strength of transverse reinforcement. The interactive influence of the amount of transverse reinforcement on the structural indexes was evaluated. Test results showed that when amounts of transverse reinforcement were similar, and yield strength of transverse reinforcement was 600 MPa or less, the neutral axis depth of a column with spiral type reinforcing bars was reduced by 28% compared with that of a column reinforced by existing rectangular hoops at peak strength. While the diagonal elements of spiral-type reinforcing bars significantly contributed to the lateral confinement of concrete, the strain of diagonal elements decreased with increases of their yield strength. It was confirmed that shapes of transverse reinforcement significantly affected the lateral confinement of concrete adjacent to plastic hinges. Transverse reinforcement with a yield strength exceeding 600 MPa, however, increased the neutral axis depth of normal-strength concrete columns at peak strength, resulting in reductions in ductility and energy dissipation capacity.