• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.591-601
• /
• 2021

As the domestic chemical industry continues to develop, handling and transportation of chemicals increases every year. Road freight in Korea accounts for more than 90%, and most of the chemical transportation is done through roads. These chemical vehicles can lead to major accidents if accidents occur. Transportation vehicles are likely to cause water pollution and soil pollution, which are factors of environmental damage, as well as traffic accidents that are the primary damage. In this work, we write a scenario for hydrogen chloride gas leakage by setting Banpo IC and Seocho IC sections as research areas, and use the ALOHA program to measure the predicted distance and analyze the time when hydrogen chloride gas reached according to the distance. In addition, risk assessment using population density was carried out for areas of damage caused by time using GIS. This suggests the need for prevention and countermeasures in areas of damage.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.2
• /
• pp.20-28
• /
• 2018

Currently, sharp increase of car is on the rise as a serious social problem due to loss of lives from car accident and environmental pollution. There is a study on ITS (Intelligent Transportation System) to seek coping measures. As for the commercialization of ITS, we aim for occupancy of world market through ASV (Advanced Safety Vehicle) related system development and international standardization. However, the domestic environment is very insufficient. Core factor technologies of ITS are Adaptive Cruise Control, Lane Keeping Assist System, Forward Collision Warning System, AEB (Autonomous Emergency Braking) system etc. These technologies are applied to cars to support driving of a driver. AEB system is stop the car automatically based on the result decided by the relative speed and distance with obstacle detected through sensor attached on car rather than depending on the driver. The purpose of AEB system is to measure the distance and speed of car and to prevent accident. Thus, AEB will be a system useful for prevention of accident by decreasing car accident along with the development of automobile technology. This study suggests a scenario to suggest a test evaluation method that accords with domestic environment and active response of international standard regarding the test evaluation method of AEB. Also, by setting the goal with function for distance, it suggests theoretic model according to the result. And the study aims to verify the theoretic evaluation standard per proposed scenario using car which is installed with AEB device through field car driving test on test road. It will be useful to utilize the suggested scenario and theoretical model when conducting AEB test evaluation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.18-31
• /
• 2018

It is important to conduct various analyzes to evacuate occupants in advance, because the disaster can cause serious injury. Therefore, it is necessary to analyze all the predictable scenarios that may occur. In this study, we propose a method to analyze the evacuation of indoor disaster using activity - based transport model MATSim. We have developed the university building as target area and simulated about 5,000 occupants. The analysis scenarios are set as basic evacuation conditions, exit closures and emergency stair closures. As a result of analysis of each scenario, the evacuation time was analyzed to be about 5:40(340s) in the base scenario, increased by 15% in the scenario 2 and increased by 23% in scenario 3. As a result of this study, we suggest that it is important to manage illegal obstacles of emergency stairs for rapid evacuation. Therefore, this study can contribute to the effective disaster prevention strategy of the building.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.230-245
• /
• 2023

The importance of evaluating the safety of Automated Vehicles (AV) is increasing with the advances in autonomous driving technology. Accordingly, an evaluation scenario that defines in advance the situations AV may face while driving is being used to conduct efficient stability evaluation. On the other hand, the single scenarios currently used in conventional evaluations address limited situations within short segments. As a result, there are limitations in evaluating continuous situations that occur on real roads. Therefore, this study developed a set of multiple scenarios that allow for continuous evaluation across entire sections of roads with diverse geometric structures to assess the safety of AV. In particular, the conditions for connecting individual scenarios were defined, and a methodology was proposed for developing concrete multiple scenarios based on the scenario evaluation procedure of the PEGASUS project. Furthermore, a simulation was performed to validate the practicality of these multiple scenarios.

• Journal of Astronomy and Space Sciences
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1985

The U.S. Space Shuttle represents the beginning of a new era in transportation and is the critical element in the industrialization of the near-Earth-space. Most of its flights are dedicated to reducing costs launching commercial satellites. However, it provides a microgravity environment for processing unique and improved materials which is generating great interest in both civilian and military sectors. The space shuttle is also the necessary step in establishing a permanent space station which could host materials analysis laboratories and commercial processing facilities. This paper reviews the different elements of the space shuttle transportation system, a typical mission scenario, and discusses current activities in materials processing in space.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.2
• /
• pp.91-103
• /
• 2003

Use case modeling on UML (Unified Modeling Language) is getting widely used in OOAD and CBD and it is considered a useful technique in dealing with the complexity of the requirements analysis. However, some of the problems with use case modeling are that it is not structured, difficult to handle non-functional requirements, and to analyze impacts among use cases. To alleviate these problems, we propose a scenario-based goal-oriented approach for use case modeling. The proposed approach is to apply a goal-oriented analysis method to use case modeling. Since goal-oriented analysis method is not systematic and many heuristics are involved, we have adopted scenarios as the basis for goal extraction. The proposed method is applied to CBIS (City Bus Information Subsystem) in ITS (Intelligent Transportation System) domain. The proposed approach helps software engineers to analyze the impact among use cases and represent non-functional requirements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.537-544
• /
• 2004

An effective methodology is reported for determining the optimal lot size of batch processing and storage networks which include uncertain demand forecasting. We assume that any given storage unit can store one material type which can be purchased from suppliers, internally produced, infernally consumed, transported to or from other sites and/or sold to customers. We further assume that a storage unit is connected to all processing and transportation stages that consume/produce or move the material to which that storage unit is dedicated. Each processing stage transforms a set of feedstock materials or intermediates into a set of products with constant conversion factors. A batch transportation process can transfer one material or multiple materials at once between sites. The objective for optimization is to minimize the probability averaged total cost composed of raw material procurement, processing setup, transportation setup and inventory holding costs as well as the capital costs of processing stages and storage units. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the storage inventory. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two sub-problems. The first yields analytical solutions for determining lot sires while the second is a separable concave minimization network flow subproblem whose solution yields the average material flow rates through the networks for the given demand forecast scenario. The result of this study will contribute to the optimal design and operation of the global supply chain.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.244-253
• /
• 2021

This study examined how the fire evacuation induction service system using a smartphone navigation application in the event of a fire affects the fire evacuation time, and the following conclusions were drawn. 1. The evacuation time was reduced by 22 seconds when the navigation application was used in computer scenario simulation. Even in the demonstration simulation, the evacuation time was reduced by 40 seconds when the navigation application was used. This indicates that the navigation application is effective in shortening the evacuation time in case of fire. 2. As a result of the demonstration scenario simulation, the time until the end of evacuation was 39 seconds faster in the case of evacuation guidance than in the case where it was not conducted. 3. No bottlenecks occurred in the evacuation route during the demonstration scenario simulation. As a result, there was a difference in the time required to complete the evacuation between the computer scenario simulation and the demonstration scenario simulation.

• Journal of Navigation and Port Research
• /
• v.34 no.7
• /
• pp.587-594
• /
• 2010

The positive and negative opinion to cargo demand of Incheon's SAMT in the near future remains cloudy. Considering port and shipping environmental changes and the logistics situation of China which explains the lack of facilities in Chinese airports, the creating of SAMT cargoes of the Incheon region could catches a favorable opportunity to be a logistics hub in the North-East Asia. On the other hand, as open-sky policy and direct-call service has been carried out between China and N.A.(North America), Incheon could cause a loss of competitiveness in SAMT because the enhancement in the aspect of the connectivity of Chinese airlines and shipping lines makes customer sent to last destination their cargoes whenever they want. In the same context, this paper analyses on conditions of domestic and international SAMT and proposes in this uncertainty future forecasting of SAMT of Incheon by scenario planning according to changes in integrated SAMT, measuring the likelihood of final scenario. This study shows the Sea & Air multi-transport volume will have either slight increase or decrease from the current condition. Consequently, RFS expansion and system & service improvement through strong ties with major cities in China will be required in a short run aspect. Nonetheless, we also need to take domestic & international transportation environment into account in the long run.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.1
• /
• pp.97-113
• /
• 2018

Low-frequency geological natural disaster events such as Pohang earthquake have been occurred. As a results, there's a growing recognition on the importance of education and training for low frequency geological disasters in Korea. In spite of many years of scientific researches on volcanic disaster prevention and preparedness on Baekdusan volcano, the results do not provide the proper scenario for the training for volcanic ash event. Fall 3D volcanic ash diffusion model was run based on wind field data for the last five year, assuming Aso Mountain's explosion with volcanic explosion index 5 for seventy two hours. The management criteria values for proper actions in the previous studies were applied to make a scenario for thirteen groups of the disaster response teams such as train transportation, water supply, electrical facilities and human health. The models on the relationship between education and training for disaster prevention and response were suggested to fulfill the scientific and practical training at local level.