• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.279-288
• /
• 2017

The Material Transportation Capability Analysis Method in North Korea includes adversary's activities such as destruction of bridge which is one kind of choke points in the road network and surprise attack against resupply march unit. Also, the amount of damage on choke points in the road network and repair time depending on repair unit commitment must be reflected. In this study, a scenario encompassing plausible resupply transportation circumstances while counterattacking into NK will be established. Then, based on such scenario, a simulation model will be established and the result of simulation will be compared to the results of numeric example which has been used in the ROK Army. We demonstrate, through a certain Corps operation area, that the Scenario-based Simulation Model results predict the performance of resupply operation very well. Therefore, it makes sustainment planners and commanders do activities which is suitable for battlefield and should be used in the real situation. It is also a stochastic model.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.582-589
• /
• 2010

As a part of the back-end fuel cycle, transportation of spent nuclear fuel (SNF) from nuclear power plants (NPPs) to a fuel storage facility is very important in establishing a nuclear fuel cycle. In Korea, the accumulated amount of SNF in the NPP pools is troublesome since the temporary storage facilities at these NPP pools are expected to be full of SNF within ten years. Therefore, Korea cannot help but plan for the construction of an interim storage facility to solve this problem in the near future. Especially, a decision on several factors, such as where the interim storage facility should be located, how many casks a transport ship can carry at a time and how many casks are initially required, affect the configuration of the transportation system. In order to analyze the various possible candidate scenarios, we assumed four cases for the interim storage facility location, three cases for the load capacity that a transport ship can carry and two cases for the total amount of casks used for transportation. First, this study considered the currently accumulated amount of SNF in Korea, and the amount of SNF generated from NPPs until all NPPs are shut down. Then, how much SNF per year must be transported from the NPPs to an interim storage facility was calculated during an assumed transportation period. Second, 24 candidate transportation scenarios were constructed by a combination of the decision factors. To construct viable yearly transportation schedules for the selected 24 scenarios, we created a spreadsheet program named TranScenario, which was developed by using MS EXCEL. TranScenario can help schedulers input shipping routes and allocate transportation casks. Also, TranScenario provides information on the cask distribution in the NPPs and in the interim storage facility automatically, by displaying it in real time according to the shipping routes, cask types and cask numbers that the user generates. Once a yearly transportation schedule is established, TranScenario provides some statistical information, such as the voyage time, the availability of the interim storage facility, the number of transported casks sent from the NPPs, and the number of transported casks received at the interim storage facility. By using this information, users can verify and validate a yearly transportation schedule. In this way, the 24 candidate scenarios could be constructed easily. Finally, these 24 scenarios were compared in terms of their operation cost.

• 한국유통학회지:유통연구
• /
• 제7권1호
• /
• pp.1-20
• /
• 2002

Many of logistics-related research in automobile industry has focused on inbound logistics and procurement. Research into outbound logistics is relatively few. As a starting research into outbound logistics in automobile industry, this paper examined its logistics network problems with three aspects - location strategy, inventory strategy and transportation strategy. We proposed alternatives of logistics network design resolution, and presented three practical scenarios based on those alternatives. Based on interview, on-site visit and internal data collection processes, we identified major domestic outbound logistics problems such as redundant logistics bases, inefficient delivery policy, insufficient inventory capacity, inventory stock quality deterioration, inefficient transportation system, and etc. In order to cope with those problems, we proposed such strategic alternatives as introduction of hub-and-spoke system, integration of logistics bases, introduction of (automatic) parking building, diversification of transportation mode, and etc. At the same time, we constructed three practically executable scenarios based on those ideas. The first is "Center Hub" scenario, the second is "Metropolitan Hub" scenario. The third and last scenario is "Regional Consolidation of Warehouses (distribution centers)".

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제57회 학술발표회논문집
• /
• pp.979-985
• /
• 2007

• 한국ITS학회 논문지
• /
• 제21권1호
• /
• pp.221-239
• /
• 2022

자율주행차의 안전성을 실효성 있게 평가하기 위해서는 기하구조, 교통안전시설, 혼잡도, 기상 등 다양한 항목들이 평가 시나리오 내에 고려될 필요가 있다. 이에 본 연구에서는 자율주행차 평가 시나리오에 반영되어야 하는 구성요소들을 도출하기 위해 먼저 평가 시나리오의 체계를 수립한 후 반영될 구성요소를 계층별로 범주화하였다. 이후 계층별로 관련 문헌을 검토하여 자율주행차 평가에 영향을 줄 수 있는 모든 평가 구성요소 후보를 도출한 후, 전문가 설문조사 결과를 바탕으로 총 77개의 자율주행차 평가 시나리오 구성요소들을 선정하였다. 선정된 자율주행차 평가 구성요소들은 시뮬레이션 평가, 주행시험장 평가, 실도로 평가 등에서 자율주행차의 안전성 평가를 위한 시나리오 개발에 많이 활용될 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제21권6호
• /
• pp.250-265
• /
• 2022

자율주행차의 도입으로 인적 오류에 의한 교통사고가 크게 줄어드는 것과 같은 긍정적 파급효과를 기대할 수 있다. 그러나 자율주행차의 H/W 또는 S/W의 오류 및 기능 부족등으로 새로운 교통안전 이슈가 앞으로 발생할 것으로 예상됨에 따라 자율주행차의 주행 안전성을 평가하기 위한 현실적이고 체계적인 시나리오 구축이 필요하다. 이에 본 연구에서는 경찰청 교통사고 데이터를 바탕으로 자율주행차 주행 안전성을 평가하기 위한 상황 시나리오(functional scenario)를 개발하였다. GIS 프로그램인 QGIS를 활용하여 국내 고속도로 톨게이트 및 램프 구간에서 발생한 교통사고 데이터를 추출하고 교통사고 개요 항목을 확인한 후, 교통사고 유형을 분류하였다. 또한, 교통사고 유형 분류 결과를 바탕으로 톨게이트와 램프 구간의 다양한 위험 상황을 내용으로 하는 상황 시나리오를 개발하였다.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.777-783
• /
• 2011

Interest about Modal Shift is not being decreased, and it is drawing limelight as green logistics which meets low carbon green growth of National development vision. As an effect of Modal Shift, not only reduction in CO2 emission but also reduction in social cost, logistics cost etc. are being discussed. However, until now research about its practical transformation effect has been scanty. In this study, the actual expenses via CO2 emission, social cost, and logistics cost etc. by road transportation and rail transportation of container cargo with Origin/Destination between Busan-Kyeonggi Area were calculated and we propose beneficial effects when transportation mode is transformed from road to rail with Scenario Planning.

• 한국재난관리표준학회지
• /
• 제1권1호
• /
• pp.53-62
• /
• 2008

석유화학 공장에서 화학 물질을 수송하는 탱크로리의 잠재적인 위험(사고의 크기 그리고 영향, 사회적인 위험)이 증가함에 따라 다양한 화학물질에 대한 운송안전 평가기준의 정립과 적극적인 위험성 평가에 관한 연구를 수행하였다. 최대예상사고분석(maximum credible accident analysis) 기법을 적용하여 "첫째 탱크로리를 이용한 취급화학물질의 대표적인 종류와 기준 비교 둘째 잠재위험에 대한 세분화된 구분 셋째 가상 사고 시나리오 파악 및 인식 넷째 가상 사고 시나리오별 위험성평가(정성/정량 - 누출원 모텔링)" 단계적 (4단계) 위험성평가를 통한 위험관리체계를 연구하였다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4030-4048
• /
• 2022

In this study, road transportation tests were conducted with surrogate fuel assemblies under normal conditions of transport to evaluate the vibration and shock load characteristics of spent nuclear fuel (SNF). The overall test data analysis was conducted based on the measured acceleration and strain data obtained from the speed bump, lane-change, deceleration, obstacle avoidance, and circular tests. Furthermore, representative shock response spectrums and power spectral densities of each test mode were acquired. Amplification or attenuation characteristics were investigated according to the load transfer path. The load attenuated significantly as it transferred from the trailer to the cask. By contrast, the load amplified as it transferred from the cask to the surrogate SNF assembly. The fuel loading location on the cask disk assembly did not exhibit a significant influence on the strain measured from the fuel rods. The principal strain was in the vertical direction, and relatively large strain values were obtained in spans with large spacing between spacer grids. The influence of the lateral location of fuel rods was also investigated. The fuel rods located at the side exhibited relatively large strain values than those located at the center. Based on the strain data obtained from the test results, a hypothetical road transportation scenario was established. A fatigue evaluation of the SNF rod was performed based on this scenario. The evaluation results indicate that no fatigue damage occurred on the fuel rods.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.261-263
• /
• 2008

Determining the most likelihood earthquake scenario in one region is very important for performing an earthquake-resistant design. The most likelihood earthquake scenario can be selected by performing deaggregation, who classifies earthquakes that occur ground motion exceeding a specific acceleration as each distance and each earthquake magnitude. If earthquakes are classified, the most likelihood earthquake scenario can be selected. Earthquake hazard analysis method that have to be performed before deaggregation follows the method that Ministry of Construction & Transportation presented. As a result of performing deaggregation at longitude 127.35 and latitude 34.7, presentable seismic ground motion scenarios can be selected at each recurrence period.