• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.873-882
• /
• 2017

Smart cards are currently used in about 150 locales, including the metropolitan ares, and are utilized as a policy base for various public areas, including public transportation, bus fares, and public transportation requirements. However, excluding the metropolitan area and some metropolitan areas, there are many areas where the existing BIS data was unable to match station information on the data and Smart cards itself are not available on the bus stop information by the line. The purpose of this research was to produce bus stop information generated by the bus stop based on the bus route, and the actual stop information generated by the model presented in the study was derived by matching the actual station information.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.587-595
• /
• 2008

Many studies on bus scheduling optimization have been done from the 1960s to recent years for establishing rational bus schedule plan that can improve convenience of bus passengers and minimize unnecessary runs. After 2000, as part of the Intelligent Transport Systems (ITS), the importance of the schedule management and providing schedule information through bus schedule optimization has become a big issue, and much research is being done to develop optimization models that will increase bus passenger convenience and, on the side of bus management, minimize unnecessary bus operation. The purpose of this study is to calculate the optimal bus frequency and create a timetable for each bus stop by applying DTR or DTRC model that use data for each bus stop and route segment. Model verification process was implemented using data collected from bus management system (BMS) and integrated transit-fare card system for bus route of Seoul's No. 472 line. In order to evaluate the reliability and uncertainty of optimal solution, sensitivity analysis was implemented for the various parameters and assumptions used in the bus scheduling model.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.100-111
• /
• 2019

The existing selected station analysis (SSA) method analyzes the link transfer mode data between origin and destination of individuals passing through stations from a microscopic standpoint. As such, existing SSA is insufficient as it uses integrated analysis using macroscopic data such as subway lines. This research builds a line chain OD based on path search of individual passenger's movement through the subway, and explores means to utilize the findings. First, a method is proposed that searches the traversed subway path from the linked passage modes that the passenger uses and applies the results to SSA line analysis. Compared to the existing SSA, this method provides for analysis of commonly conflicting features such as the line on which the station is passed, and the stations included on the line thanks to the presence of complete information of the individual passenger's traversed path. It also allows for integrated observation of the line chain OD that approaches a certain station. For enhanced understanding, Seoul Metro Line 9 is used as a case study to demonstrate the integrated formulation concept of line chain OD centered around a certain station as well as the macroscopic features of the traversed path that approaches stations included on the line.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.1-18
• /
• 2019

A short-turn bus is a bus that is operated within a subsection of an existing bus line. Previous studies regarding short-turn buses decided optimal turn-back points for a single bus line rather than a bus network. Also, in-vehicle crowding which has a significant impact on transit convenience was rarely considered. Therefore, this study aimed to develop a methodology to set priorities for the introduction of short-turn buses of bus lines and sections, considering crowding. To achieve this objective, we calculated occupancies and crowding alleviation benefits of existing bus lines overlapping a new short-turn route based on transit card data, before and after the introduction of short-turn strategy. Also, operator and social costs caused by the introduction of short-turn buses were calculated. Those procedures were iterated over bus lines and sections to operate a short-turn service, and a section whose benefit-to-cost ratio (B/C) is the largest in a line was selected to operate a short-turn service in the line. After, priorities of bus lines to introduce short-turn services could be determined based on B/C values, and the optimum total fleet size could be determined when a short-turn strategy is applied in multiple lines.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.268-275
• /
• 2015

As Korea is predicted to be a super-aged society in the near future, transport policies that internalize the elderly have also drawn attentions. Even though some studies have examined the travel by the elderly with various motives, it is, however, difficult to find references that deal with the unique spatio-temporal characteristics of senior trips. For example, the models by time period have represented the temporal property while a set of independent variables associated with urban infrastructure have addressed the spatial feature. This study was conducted under a trip attraction model for transit. The result shows that transit facilities, commercial areas, and hospitals are the dominant factors to explain the travel by the elderly, particularly during 09:00-17:00.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.225-240
• /
• 2022

Gyeonggi-do comprises several types of areas, including urban, semi-urban, and rural areas. The availability of public transportation services varies depending on the area types, but the fare structure is based on a simple transfer rule, i.e., a transfer is free when completed within 30 minutes. As a result, users in non-urban areas with a poor frequency of public transportation services do not receive transfer discounts because most of the bus routes in these areas have a gap of more than 30 minutes between services. In terms of equality of opportunity, the transfer rule is being applied unfavorably and, as a result, equality of opportunity of the non-urban commuter is severely affected. Therefore, this study analyzed the user benefits mainly stemming from transfer fares using the smart card data of commuters using public transportation in Gyeonggi-do. An index called the beneficiary rate of the free transfer was developed and a scenario analysis was conducted based on the various levels of the rate. The results of this analysis proved that the users of public transportation services in non-urban areas in Gyeonggi-do can only receive transfer benefits by the extended time for free transfer and not by the implementation of a uniform policy irrespective of the type of area. The study also suggested an equitable fare transfer system and policy alternatives.

• Journal of the Korean Geographical Society
• /
• v.44 no.2
• /
• pp.176-186
• /
• 2009

Transportation policy to facilitate the public mode use is of the foremost importance to the local governments of Metropolitan Seoul, regarding the economic and environmental consequences of the increasing use of car. Understanding the travel behaviour is essential to the establishment of proper policy to guide more people to the use of public modes instead of private. The paper reports a result of sequential analysis of individual travel behaviour in Metropolitan Seoul, using a multi-dimensional motif search technique applied to Smart Card data that integrates individuals' different public mode uses. Groups of travel patterns with similar sequential information identified distinctive travel behaviour between Seoul north and south and between metro and bus uses. Travel patterns are more bounded within north Seoul and south Seoul respectively than crossing Han River between north and south. Within north and south, travel patterns visiting northern CBD and southern CBD, respectively, as well as their local neighbour in north and south, often use metro and metro-local bus combination, while travel patterns visiting only the north and south locals without CBDs more use only the local bus line and even only the areal bus line.

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.23-37
• /
• 2018

In recent years, it is very difficult to construct and expand new infrastructures in a city center because of long-term low growth and lack of space due to urban overcrowding. So, there is a need to study a variety of Retrofitting techniques and urban applications that can lead to sustainable development while efficiently utilizing existing facilities. 'Retrofit' means a sustainable urban retrofitting as a directed alteration of the structures, formations and systems of existing facilities to improve energy, water and waste efficiencies. In this study, we applied a hierarchical network design technique that can reflect the structural hierarchy of a city to study how to retrofit public transportation routes in Seoul. The hierarchical network design means dividing the hierarchy according to the functions of hubs and connecting different hierarchies to form a hierarchical network. As a result of comparing the application results of various retrofitting scenarios of public transport, the differences of daily PKT and PHT by about 2.6~3.2% less than before the improvement address that the convenience of passengers is increased. Therefore, it is expected that if the route planning is established according to the proposed method, it will increase the number of passengers and the operational efficiency by the improved convenience of public transit passengers.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.3
• /
• pp.12-19
• /
• 2023

In the case of the construction industry, the relationship between process and cost should be appropriately distributed so that the finished product can be delivered at the minimum fee within the construction period. At that time, it should be considered the size of the bridge, the construction method, the environment and production capacity of the factory, and the transport distance. However, due to various reasons that occur during the construction period, problems such as construction delay, construction cost increase, and quality and reliability degradation occur. Therefore, a systematic and scientific construction technique and process management technology are needed to break away from the conventional method. The prefab(Pre-Fabrication) is a representative OSC (Off-Site Construction) method manufactured in a factory and constructed onsite. This study develops a resource and process plan optimization system for the process management of the Nodular girder, a prefab bridge girder. A simulation algorithm develops to automatically test various variables in the personnel equipment mobilization plan to derive the optimal value. And, the algorithm was applied to the Paju-Pocheon Expressway Construction (Section 3) Dohwa 4 Bridge under construction, and the results compare. Based on construction work standard product calculation, actual input manpower, equipment type, and quantity were applied to the Activity Card, and the amount of work by quantity counting, resource planning, and resource requirements was reflected. In the future, we plan to improve the accuracy of the program by applying forecasting techniques including various field data.