• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1213-1218
• /
• 2004

The present article reports extensive numerical results on the non-local characteristics of ultra-short pulsed laser-induced breakdowns of fused silica ($SiO_{2}$) by using the multivariate Fokker-Planck equation. The nonlocal type of multivariate Fokker-Planck equation is modeled on the basis of the Boltzmann transport formalism to describe the ultra-short pulsed laser-induced damage phenomena in the energy-position space, together with avalanche ionization, three-body recombination, and multiphoton ionization. Effects of electron avalanche, recombination, and multiphoton ionization on the electronic transport are examined. From the results, it is observed that the recombination becomes prominent and contributes to reduce substantially the rate of increase in electron number density when the electron density exceeds a certain threshold. With very intense laser irradiation, a strong absorption of laser energy takes place and an initially transparent solid is converted to a metallic state, well known as laser-induced breakdown. It is also found that full ionization is provided at intensities above threshold, all further laser energy is deposited within a thin skin depth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1409-1416
• /
• 2000

In this study, turbulent flows in a planar combustor which has a square rib-type flame holder are numerically investigated by Large Eddy Simulation(LES). Firstly, the flow fields with or without jet injection downstream of the flame-holder are examined using uniform inlet velocity. Comparison of the present LES results with experimental one shows a good agreement. Secondly, to investigate mixing of oxidizer(air) and fuel injected behind the flame holder, the scalar-transport equation is introduced and solved. From the instantaneous flow and scalar fields, complex and intense mixing phenomena between fuel and jet are observed. It is shown that the ratio of jet to blocked air velocity is an important factor to determine the flow structure. Especially, when the ratio is large enough, the fuel jet penetrates the main vortices shed from the flame holder, resulting in significant changes in the flow and scalar fields.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.15-27
• /
• 2013

While the vehicle detector is collected from a variety of information was mainly used as a real-time data. Recently scheme of application for archived traffic data has become increasingly important. In this background, this research were conducted on the improvement of the preprocessing for archived traffic data application. The purpose of improving specific preprocessing was reflect transportation phenomena by traffic data. As evaluation result, improvement preprocessing was close to the actual value than exist preprocessing.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2003

An analytical and experimental study of the thermal performance of axial heat pipe with axial groove is conducted to determine the optimal mass of working fluid for the maximum heat transport capacity of heat pipe with axial grooves. Generally, the mass of working fluid has been fully charged by considering only a geometrical shape of axial grooves embedded in a heat pipe. When the heat pipe is operated in a steady state, the meniscus re-cession phenomena of working fluid is occurred in the evaporator region. In this work, the optimal mass of working fluid was obtained from the axial variation of capillary pressure, the radius of curvature and wetting angle of meniscus of liquid-vapor interface. Experimental results were also obtained by varying the mass of working fluid within a heat pipe, and presented for the maximum heat transport capacity corresponding to the operating temperature and the elevation of heat pipe. Finally, the analytical results of the optimal mass of working fluid were compared with those of the experimental mass of working fluid.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.908-911
• /
• 2004

The purpose of this study is to investigate the applicability of the two dimensional model in natural rivers. In this study, two dimensional unite element model, SMS, is used to simulate a complex flow along with the sediment movements in the natural river. The RMA-2 model embeded in SMS is used to simulate flow phenomena and SED-2D model is employed to simulate sediment transport. The model is applied to the confluence zone of the Gam River and mouth of Nakdong River. For model calibration, the result of the unsteady flow analysis is compared with the Typhoon 'Rusa' data. In addition, the runoff analysis was conducted for the determination of the project flood and the flood forecasting. The simulation results presented the characteristics of two dimensional flow with velocity vector and flow depth. The sediment transport characteristics are shown in terms of sediment concentration as well as bed elevation change. Accordingly, the SMS model in this study turned out to be very effective tool for the simulation of the hydrodynamic characteristics under the various flow conditions and corresponding sediment transports in natural rivers.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.3
• /
• pp.143-151
• /
• 1990

The sediment transport in shallow water regions has been studied in various ways and, accordingly, many formulas have been proposed. However, when these formulas are applied practically in the field, they are not sufficient to fully estimate the sediment transport rate yet. The primary reason is how to take into account the effect of irregularities of field waves : wave heights, periods and directions. Therefore, it is necessary to investigate stochastic and kinematic characteristics of waves in three dimensional random seas in order to more accurately estimate it. In particular, the asymmetrical properties of directional spectrum become significant and play an important role in various phenomena in a shallow water region. In this study, their effects of incident waves the joint distribution of wave heights, periods and directions are investigated through field measurements.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.399-406
• /
• 2013

This paper describes a new simulation technique for advection-diffusion phenomena over the sea surface using the lattice Boltzmann method (LBM), capable of predicting oil dispersion from tankers. The LBM is used to solve the pollutant transport problem within the framework of the ocean environment. The sea space is represented by the lattices, where each lattice has the information on oil transportation. Since dispersed oils (i.e., oil droplets) at sea are transported by convection due to waves, buoyancy, and turbulent diffusion, the conservation of mass and many physical oil transport rules were used in the prediction model. Since the LBM is modeled using the uniform lattices and simple rules, it can be easily accelerated by the parallel mechanism, for example, GPU-accelerated method. The proposed model using the LBM is used to simulate a simple pollution event with the oil pollutants of 10,000 kL. The simulation results indicate that the LBM method accelerated with the GPU is 6 times faster than that without the GPU.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.596-603
• /
• 2009

The performance of proton exchange membrane fuel cell (PEMFC) is seriously changed by the humidification condition which is intrinsic characteristics of the PEMFC. Typically, the humidification of fuel cell is carried out with internal or external humidifier. A membrane humidifier is applied to the external humidification of residential power generation fuel cell due to its convenience and high performance. In this study, a simple static model is constructed to understand the physical phenomena of the membrane humidifier in terms of geometric parameters and operating parameters. The model utilizes the concept of shell and tube heat exchanger but the model is also able to estimate the mass transport through the membrane. Model is constructed with FORTRAN under Matlab/$Simulink^{(R)}$ $\Box$environment to keep consistency with other components model which we already developed. Results shows that the humidity of wet gas and membrane thickness are critical parameters to improve the performance of the humidifier.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.77-84
• /
• 2006

Transport mechanisms of nickel ion through a continuous electrodeionization (CEDI) were investigated in terms of electric properties of ion exchange textile (IET). The porous plug model and extended Nernst-Plank (N-P) equation were applied for the description of transport mechanism of nickel ion. The model revealed that the CEDI performance was mainly due to the induced current not accelerated mobility by IET. This study also suggested that optimal operating conditions are attained with minimized electroregeneration region.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.79-84
• /
• 2002

An accurate cross sections set is necessary for the quantitatively understanding and modeling of plasma phenomena. By using the electron swarm method, we determine an accurate electron cross sections set for objective atoms or molecule at low electron energy range. It is general calculation that used in this method to an two-term approximation of Boltzmann equation. But it may give erroneous transport coefficients for CF$_4$ molecule treated in this paper having \`C2v symmetry\`, therefore, multi-term approximation of the Boltzmann equation analysis which can consider anisotropic scattering exactly is carried out. It is necessary to require understanding of the fundamental principle of analysis method. Therefore, in this paper, we compared the electron transport coefficients(W and ND$\_$L/) in pure Ar, O$_2$, and CF$_4$ gas calculated by using two-term approximation of the Boltzmann equation analysis code uses the algorithm proposed by Tagashira et al. with those by multi-term approximation by Rubson and Ness which was developed at James-Cook university, and discussed an application and/or validity of the calculation method by comparing these calculated results.