• Proceedings of the KOR-KST Conference
• /
• 1995.05a
• /
• pp.61-68
• /
• 1995

Difficulties in riding, driving and parking are a common issue which inevitably appears in city urbanization and city modernization development all over the world. However, those cities differ in controlling the traffic. According to the specific practice in Shanghai, this article presents the various factors which affect the traffic capacity and the operation quality. This article also outlines transportation system management technique of overall coordination and comprehensive control in the following seven aspects: controlling traffic motivation; improving traffic distribution; reasonably and scientifically selecting travel mode, travel route and travel time; reinforcing traffic management and road construction. The article finally suggests that above mentioned points are cost-effective ways of handling traffic plight for metropolitan transport.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.180-186
• /
• 2009

Due to the large capacity and low cost, electrolytic capacitors with of energy storage and voltage regulation are used for almost all types of non-linear load as the DC/DC converter. Electrolytic capacitor, which is the most of the time affected by the aging effect, plays very important role for the power converter system quality and reliability. Therefore, this paper proposes a new method to detect the changes the capacitance value of an electrolytic capacitor in order to analyze the internal characteristic and worn-out state of an electrolytic capacitor. Simulation results by frequency analysis show the validity of the proposed capacitance estimation algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.65-72
• /
• 2016

This paper presents the analysis of the analysis of thrust characteristics of linear induction motors(LIMs) according to secondary reaction plate. LIMs are well known as high speed transport systems, which can obtain thrust directly without gears and links, or auxiliary mechanisms. A simple structure, easy maintenance, and less environmental pollution are advantages of LIMs. In transport systems using LIMs, the secondary reaction plate is an important design factor, because it has considerable impact on the cost of the railway as well as the performance of the LIMs. This paper deals analyzed the characteristics of linear induction motor used for moving the vehicle of container scanner. Thrust, efficiency and load characteristic were interpreted with FEM regarding two models whose material of secondary reaction plate was copper and aluminum. It suggested the interpretation of thrust, efficiency and power factor characteristic along slip and compared the operation ability of linear induction motor through characteristics analysis along the load.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.195-197
• /
• 2009

It is a proven fact with the opening of the Seoul metro line number 1 in 1974 traffic congestion on the roads has decreased and the efficiency of people transportation in general has greatly been enhanced in the downtown and surrounding areas of Seoul. Even today construction of new subway lines are under way and many more are being planned due to the easy access to stations, short waiting and average travel times, compared with personal vehicles, contributing to the efficiency of the public transportation systems that are linking the downtown areas and also the intercity systems in moving passengers during rush hour and times of special event. Since the labour costs of the train operator in any large city based subway system accounts for a major part of the operating costs per kilometer and to ensure cost efficient operations, especially during non-peak hours, it is necessary to implement an unmanned(auto-driven) subway system. In order to implement such a system it is imperative that the on-board and wayside signalling control systems be fully automated as well. Only through proper examination of safety procedures not only by the AUGT(Automated Urban Guided Transport)system but also by ail the international standards organizations involved can safely and stability be ensured.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2012

In this paper, we propose an energy-aware source routing protocol for maximizing a network lifetime in mobile ad hoc network environments. The proposed routing protocol is based on the source routing and chooses a path that maximize the path lifetime, by considering both transmit/receive power consumption and residual battery power in the mobile nodes from the perspective of source-destination end-to-end. This paper proposes a new routing cost and designs a new routing protocol for minimizing the control packet overhead occurred during the route discovery. Simulation results show that the proposed scheme has similar performances to the conventional routing schemes in terms of the number of transmission hops, transmission rate and total energy consumption, but achieves the performance improvement of 20 percent with respect to the lifetime.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.4
• /
• pp.5-8
• /
• 2004

A low cost MOD processing using YBCO oxide powder as a starting precursor was employed for fabrication of YBCO thin films. YBCO oxide is advantageous over metal acetates or TFA salts which are popular starting precursors for conventional MOD-TFA process. YBCO thin films were prepared by oxide-precursor-based MOD process and annealing condition was optimized. The YBCO thin film annealed at 78$0^{\circ}C$ shows no transport $I_c$ and poor microstructure. However, the YBCO thin film annealed at higher temperature shows improvement in microstructure and current transport property. In order to improve critical current, YBCO thin film was prepared by double coating method. YBCO thin film prepared with double coating approach shows enhanced superconducting performance ($I_c$>100A/cm-w).

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.323-334
• /
• 2020

The quality of hospital services remains a concern of both the manager and the patient. The study aims to identify factors affecting outpatient satisfaction at private general hospitals in Ho Chi Minh City, establishing a scale for measuring them. Some 450 outpatients who were treated in five top private hospitals in Ho Chi Minh city (HCMC) in 2019 - An Sinh General Hospital, Hoan My General Hospital, Columbia Asia International Hospital, FV Hospital, and Vu Anh International General Hospital - were interviewed directly in the last quarter of 2019 to obtain the information. The SERVPERF model, plus the cost, together with the SPSS software, have been used to process information by Cronbach's alpha analysis, Exploratory Factor analysis, and linear regression analysis. The results show that there are five factors influencing outpatient satisfaction at private general hospitals in HCMC, in which four factors affects positively in the order of decreasing importance: treatment outcome, doctors and nurses' professional capacity, facilities and environment of the hospital, hospital care, and the treatment time factor affects negatively. The results of the study provide private hospital in HCMC managers with a number of suggestions to increase the level of hospital service quality, so that increase outpatients satisfaction.

• Journal of Korea Port Economic Association
• /
• v.17 no.1
• /
• pp.159-180
• /
• 2001

The quantity of waste has been increased due to the increase in population and consumption after industrialization. Accordingly it caused the urban environmental problems, the lack of landfill and the pollution around the landfill. Thus, it is necessary to research the adequate alternative in the long-term. In case of Japan, areas and quantities of landfills at sea are more great than those of landfills in land. And investigating our condition, landfills of the metropolitan area in land are to be fully filled with wastes up to 2020 and be closed. In this research, construction of landfill sites at sea is suggested as the alternative waste disposal method and it is suggested that in our country, the suitable landfill sites of the metropolitan area are the regions around Jangbong-do Island and Muei-do Island. It is expected that the best way to transport wastes is to transport through Kyungin canal from the middle collection center to the lower Han River. Rough cost for construction of landfill at sea, if it is used for 50 years, is expected to be 2 trillion won and total time to construct the landfill is expected to be 10 years. Many studies concerning to this research proposal are to be performed so that construction of landfills familiar to environment are to be accomplished.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.68-74
• /
• 2008

The substrate integrated waveguide (SIW) structure can be approximated as the rectangular waveguide using common dielectric substrate with via-holes. To realize reflection-type resonator, $50-{\omega}$ microstrip line can be used for coupling with the center plane of the cavity. The oscillator is designed to operate at 9.45 GHz using the reflection-type SIW cavity resonator. The phase noise of oscillator shows -98.1dBc/Hz at 100 KHz offset. In experiment, the reflection type SIW cavity resonator improves the loaded quality factor making the low phase noise oscillator possible. Due to the entirely planar structure of this resonator, this technique can also be adequate in oscillator applications for a low cost and low phase noise performance.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.354-364
• /
• 2017

This study tries to evaluate the effect of ITT introduction in Busan New Port. The study used the estimation model of the number of vehicles required in accordance with the backhaul rate. The model used big data, COPINO e-document for one year in 2015. COPINO recorded the event such as truck ID, container ID, ATA, damage etc when truck arrived at gate. The study finds important information to estimate the required number of trucks for handling current ITT containers in Busan New Port: Daily throughput in Busan New Port is 1650 vans, especially night throughput recorded peak level in 1800 hours to 2400 hours, the throughput between adjacent terminals recorded high, i.e PNIT to HPNT. The transportation capability for 6 hours between terminals is from 4 vans to 7 vans. The required trucks are estimated 89 currently without considering peak level. If we change the back haul rate from current 20% to 40%, 60% and 80%, how much would the cost drop? It was discovered that, if it is raised to 40%, 60% and 80%, the number of vehicle required will be reduced from 89 (current) to 76, 65 and 59. It was also discovered that the total savings will reduce down to 12%, 25% and 34%.