• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.193-199
• /
• 2020

In this paper we propose a dark-field digital holographic microscopy system based on 360-degree oblique illumination. This setup is constructed without using a dark-field objective. The principle of 360-degree oblique illumination of vortex beam and dark-field digital holographic microscopy are introduced theoretically and experimentally. By analyzing the reconstructed image of a dark-field digital hologram of a USAF 1951 target, it is proved that the imaging resolution can be improved by this method. And also, comparison and analysis are made on the reconstructed image of a bright-dark field digital hologram of a pumpkin stem slice, the result shows that the imaging contrast is also enhanced with this method, and it is effective for dark-field digital holographic microscopy imaging of large transparent biological samples.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.13-16
• /
• 2014

We prepared the ITO/Ag multilayer thin films on soda-lime glass substrate by the Facing Target Sputtering System (FTS) at room temperature. To confirm the effect of Ag layer in ITO/Ag multilayer thin films, we have prepared various range of Ag layer in its thickness and investigated prior to the setting of ITO/Ag multilayer thin films. The thickness of Ag layer was controlled by the sputtering deposition time. Properties of as-prepared samples were investigated by using a four-point probe, UV-Visual spectrometer with a spectral visual range (400 - 800 nm) and X-ray diffractometer (XRD). As a result, the transmittance of as-prepared samples turned out to be very low in the visible range due to light-scattering on the surface of thin film as the thickness of Ag layer got increased. However, reduction of phenomenon of light-reflection in visual range was observed around 20nm of Ag thickness. We prepared the ITO/Ag multilayer thin film with a resistivity of about $8{\times}10^{-5}[{\Omega}-cm]$ and a transmittance of more than 80 % at 550 nm.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.41-45
• /
• 2016

ITO/GZO double layered thin films were prepared on transparent glass substrates. Ga-doped ZnO(GZO) films were deposited by RF magnetron sputtering using an ZnO:Ga (98: 2 wt%) target. The post deposition annealing process was conducted for 30 minutes at different temperature of 100, 200, 300 and $400^{\circ}C$, respectively. As increase annealing temperature, ITO/GZO double layered thin films show the increment of the prefer orientation of ZnO diffraction peak (002) in the XRD patterns. We obtained Ga-doped ZnO thin films with a lowest resistivity of $1.84{\times}10^{-4}{\Omega}-cm$ at $400^{\circ}C$ and transparency above 80% in visible ranges. The figure of merit obtained in this study means that ITO/GZO double layered thin films which annealed at $400^{\circ}C$ have the highest optoelectrical performance in this study.

• International Journal of Contents
• /
• v.11 no.3
• /
• pp.24-33
• /
• 2015

Against the backdrop of Habermas' theory of communicative action, we empirically analyzed the level of interactivity and narratives offered in nation-states' ministry of foreign affairs Web sites. A multiple regression analysis was performed in an attempt to identify factors affecting the level of interactivity in such Web sites. Findings revealed that the level of economic development is the sole significant factor in regards to the level of interactivity. Further, self-interested, goal-directed, and strategic purposes behind the allegedly transparent, engaging, and interactive public diplomacy were evidenced through a critical analysis of the objectives, key issues, and target publics addressed and highlighted in the public diplomacy narratives on the Web. The results suggested a possible digital divide in the interactive adoption of Web public diplomacy as well as strategic motives and interests embedded in the public diplomacy communication on the Web. This study helps increase our understanding of the paradox of public diplomacy in the digital age.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.98.1-98.1
• /
• 2016

PTFE (Polytetrafluoroethylene) 는 벌크 형태는 물론 박막으로도 독특한 특성을 나타내는 물질이다. 매우 낮은 마찰계수, 발수표면특성, 화학적 비반응성은 다양한 방면의 적용이 가능하게 한다. 두께 $1-2{\mu}m$ 이나 50 nm 이하의 박막의 형태로서 발수 특성은 스퍼터링 조건에 따라서는 벌크 PTFE의 특성보다 뛰어나다. 순수한 PTFE 타겟을 사용하여 얇은 PTFE 막 증착을 위해 RF (radio-frequency) 스퍼터링을 하였다. 스퍼터 타겟 건 파워, 공정 압력, 그리고 기판 스테이지와 Si wafer 나 다양한 시편에 인가되는 RF 바이어스 (bias) 등과 같은 스퍼터링 변수의 변화가 가능하다. 공정 변수에 따라서 RF 스퍼터링에 의한 순수한 PTFE 박막과 바이어스가 인가된 유사 PTFE 박막을 비교하여 탐구하였다. 스퍼터링에 의한 PTFE 코팅은 접촉각이 100도 또는 그이상의 초발수성을 나타내는 장점을 갖고 있고, 90% 이상의 높은 투과도를 나타낸다. PTFE 타겟을 사용한 종래의 일반적인 스퍼터링에 의하여, 일예로 실리콘 웨이퍼상에 증착된 코팅막은 낮은 경도와 기판과의 밀착력이 좋지 않은 문제를 갖고 있다. 높은 에너지 환경에서 만들어진 PTFE 코팅은 기존의 스퍼터링 방식으로 만들어진 코팅에 비해 다른 특성을 나타낸다. PTFE 막의 경도와 밀착력을 높이고자 bias를 인가한 RF 스퍼터링을 시도하였다. 코팅 접촉각, 투과도, 나노인덴터에 의한 경도, 그리고 스크래치 테스트에 의한 코팅막의 밀착력을 살펴보았다. PTFE 폴리머 타겟을 사용한 RF 스퍼터링으로 만들어진 고경도 PTFE 유사 코팅의 경도 변화 기구를 고찰하였다.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.532-536
• /
• 2006

The annealing temperature effect of transparent conducting oxide film grown on glass substrate for solar cell application was studied in this paper. Using pulsed DC magnetron sputtering with 1 at% Al-doped ZnO target, TCO films were deposited on coming 7059 glass at room temperature. Al:ZnO thin films were annealed at 200, 400, Al $600^{\circ}C$ for 10 min and annealing resulted in lower biaxial compressive stress of about 1GPa and increased average crystallite size in all films. The as-grown film shows the resistivity of $1{\times}10^{-2}{\Omega}{\cdot}cm$ and transmittance under 80%, whereas the electrical and optical properties of film annealed at $400^{\circ}C$ are enhanced up to $5{\times}10^{-4}{\Omega}{\cdot}cm$ and 85%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.439-440
• /
• 2008

Indium Zinc Tin Oxide (IZTO) thin films for transparent thin film transistor (TTFT) were deposited on glass substrate at room temperature by facing targets sputtering (FTS). The FTS system was designed to array two targets facing each other and forms the high- density plasma between. Two different kinds of targets were installed on FTS system. One is ITO ($In_2O_3$ 90wt.%, $SnO_2$ 10wt.%), the other is IZO($In_2O_3$ 90wt%, ZnO 10wt%). The conductive and optical properties of IZTO thin film is determined depending on variation of DC power and working pressure. Therefore, IZTO thin films were prepared with different DC power and working pressure. As-deposited IZTO thin films were investigated by a UV/VIS spectrometer, an X-ray diffractometer (XRD), a scanning electron microscopy (SEM), a Hall Effect measurement system. As a result, all IZTO thin films deposited on glass substrate showed over 80% of transmittance in visible range (400~800 nm) at $O_2$ gas flow rate. We could obtain IZTO thin films with the lowest resistivity $5.67\times10^{-4}$ [$\Omega{\cdot}cm$] at $O_2$ gas flow rate 0.4 [sccm).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.389-392
• /
• 2009

Metal oxides have been proposed as an alternative channel material to hydrogenated amorphous silicon in thin film transistors (TFTs) because their higher mobility and stability make them suitable for transistor active layers. Thin films of indium zinc oxide (IZO) were deposited using a High Target Utilization Sputtering (HiTUS) system on various dielectrics, some of which were also deposited with the HiTUS. Investigations into bottom-gated IZO TFTs have found mobilities of 8 $cm^2V\;^1s^{-1}$ and switching ratios of $10^6$. There is a variation in the threshold voltage dependent on both oxygen concentration, and dielectric choice. Silica, alumina and silicon nitride produced stable TFTs, whilst hafnia was found to break down as a result of the IZO.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.493-500
• /
• 1996

AZO transparent conducting thin films were fabricated by reactive DC magnetron sputtering method using Zn metla target containing 2 wt% of Al, and electrical and optical properties were investigated after heattreatment. Electrical resistivity was reduced 50% and had reached $1{\times}10^{-3}~3.5{\times}10^{-4}\;{\Omega}cm$ by heat treatment. In the case of oxide AZO films, the resistivity of $10^{3}\;{\Omega}cm$ was also decreased to $2{\times}10^{-3}\;{\Omega}cm$ after heat treatment. The optical transmittance of AZO films deposited in the transition range was increased from 59.4 % to 77.4 % by $400^{\circ}C$, 30 min heat treatment.

• Applied Science and Convergence Technology
• /
• v.23 no.5
• /
• pp.279-283
• /
• 2014

Al doped ZnO thin films have been deposited by a RF magnetron sputtering technique from a ZnO (2 wt.% $Al_2O_3$) target onto glass substrates heated at temperature ranging from RT to $400^{\circ}C$. X-ray diffraction analysis shows that the deposits have a preferential growth along the c-axis of a hexagonal structure. The full with at half maximum decreases from 0.45 to $0.43^{\circ}$ in the studied temperature range. The root main square surface roughness increases with substrate temperature from 1.89 to 2.67 nm. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is red-shifted with substrate temperature from RT to $400^{\circ}C$. The sheet resistance increases from 92 ohm/sq to 419 ohm/sq when the deposition temperature increases from RT to $400^{\circ}C$. The increment of sheet resistance is caused by lowered carrier concentration resulting from an increase in surface roughness.