• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.545-557
• /
• 2021

Engine is the main source of vibration that generates unwanted noise and vibration of vehicle chassis. Especially, in submarine applications, radiation of noise signatures can be detected at some distance away from the submarine using a sonar array. Thus quiet operation is crucial for submarine's survivability. This study addresses reduction of the force transmissibility originating from engines and transmitted to hull through engine mounts. An inertial damper, as an actuator of hybrid mount system, is addressed to reduce even further the level of vibration. Narrow band FxLMS algorithms are broadly used to cancel the vibration of engine mount because of its excellent performance of canceling narrow band noise. However, in real active dampers, the maximum displacement of damper mass is kinematically restricted. When the control input signal from the FxLMS algorithm exceeds this limitation, the damper mass will collide with the mechanical stops and results in many problems. Originated from these, a modified narrow band FxLMS algorithm based on the equalizer technique with the maximum allowable displacement of active damper mass is proposed in this study. Some simulation results showed that the propose algorithm is effective to suppress vibration of engine mount while ensuring given displacement constraint.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.209-213
• /
• 2022

Key exchange protocol (KEP) is an essential setup to secure authenticates transmission among two or more users in cyberspace. Digital files protected and transmitted by the encryption of the files over public channels, a single key communal concerning the channel parties and utilized for both to encrypt the files as well as decrypt the files. If entirely done, this impedes unauthorized third parties from imposing a key optimal on the authorized parties. In this article, we have suggested a new KEP term as isokey interchange protocol based on generalization of modern mathematics term as isomathematics by utilizing isonumbers for corresponding isounits over the Block Upper Triangular Isomatrices (BUTI) which is secure, feasible and extensible. We also were utilizing arithmetic operations like Isoaddition, isosubtraction, isomultiplication and isodivision from isomathematics to build iso-key interchange protocol for network communication. The execution of our protocol is for two isointegers corresponding two elements of the group of isomatrices and cryptographic performance of products eachother. We demonstrate the protection of suggested isokey interchange protocol against Brute force attacks, Menezes et al. algorithm and Climent et al. algorithm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.8
• /
• pp.43-52
• /
• 2022

The vibration characteristics of a hammer press are important parameters for machine design and production control. In this study, a counterblow hammer press was mathematically modelled as a mass-spring-damper system in order to analyze its vibration characteristics. The forging efficiency was theoretically derived as a function of the mass ratio, momentum ratio, and the coefficient of restitution And the effects of the mass ratio, momentum ratio and the restitution coefficient on the forging efficiency were also investigated for two particular cases of the unit mass ratio and unit momentum ratio. Additionally, the vibration responses of the counterblow hammer press due to the ram colliding impact were analyzed, and the force transmitted to the foundation through the mounting unit was determined.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1047-1053
• /
• 2022

The leaf spring for a truck absorbs shocks or vibrations from the road surface while driving with the elastic force of the material and prevents the shock from being transmitted to the vehicle body. It is subjected to cyclic stress, and fatigue fracture occurs frequently. This study analyzes fractured leaf spring from a 25 ton truck that has been operating for about a year. In the fractured portion, which is the origin of crack, inclusions were observed, and fatigue failure was caused by cyclic stress. In the stress calculation and FE analysis, the stress at the center of the leaf spring was obtained to be 54~65% of the yield strength of the base material and damaged material. It is most important to prevent the mixing of impurities in the steel manufacturing for leaf springs. The large stress portion of the leaf spring needs to introduce compressive residual stress by peening etc.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.129-134
• /
• 2023

The greatest challenge of this century is the protection of stored and transmitted data over the network. This paper provides a new hybrid algorithm designed based on combination algorithms, in the proposed algorithm combined with Hill and the Advanced Encryption Standard Algorithms, to increase the efficiency of color image encryption and increase the sensitivity of the key to protect the RGB image from Keyes attackers. The proposed algorithm has proven its efficiency in encryption of color images with high security and countering attacks. The strength and efficiency of combination the Hill Chipper and Advanced Encryption Standard Algorithms tested by statical analysis for RGB images histogram and correlation of RGB images before and after encryption using hill cipher and proposed algorithm and also analysis of the secret key and key space to protect the RGB image from Brute force attack. The result of combining Hill and Advanced Encryption Standard Algorithm achieved the ability to cope statistically

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.197-206
• /
• 2006

Vibration of string is transmitted to the front plate through bridge to cause resonance of the instrument body in viol family string instruments. Therefore. the properties. geometrical shape. and positioning of the bridge are expected to have some effect on the sound color. In this study the strain and the stress in the bridge. and the force exerted on the top plate by the bridge as the string vibrates the bridge in cello are calculated through simulation based on the theory of elasticity. The modes of vibration and the characteristic frequencies are also found. Furthermore. the effect of geometric shape of bridge on sound color is studied in terms of frequency response. The results of this study show that the vibration characteristics of bridge is quite complex and the properties and the geometrical shape of bridge have significant effect on sound color, and therefore. the sound color of a cello can be controlled by changing the geometrical shape of bridge.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2005

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis of internal connection system(ITI system) according to position and direction of load, under vertical and inclined loading using finite element analysis (FEA). The finite element model of a synOcta implant and a solid abutment with $8^{\circ}$ internal conical joint used by the ITI implant was constructed. The gold crown for mandibular first molar was made on solid abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric cusp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant under both vertical and oblique loading but stresses in the cancellous bone were low under both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. So, the relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 4. In this internal conical joint, vertical and oblique loads were resisted mainly by the implant-abutment joint at the screw level and by the implant collar. Conclusively, It seems to be more important that how long the distance is from center of rotation of the implant itself to the resultant line of force from occlusal contact (leverage). In a morse taper implant, vertical and oblique loads are resisted mainly by the implant-abutment joint at the screw level and by the implant collar. This type of implant-abutment connection can also distribute forces deeper within the implant and shield the retention screw from excessive loading. Lateral forces are transmitted directly to the walls of the implant and the implant abutment mating bevels, providing greater resistance to interface opening.

• The Southeast Asian review
• /
• v.21 no.2
• /
• pp.43-75
• /
• 2011

The article focuses on the impact and Acceptance of Hindu culture in Modern Southeast Asian Buddhism. The purpose of this study is to examine critically the influential epic Ramayana on Siam culture, Thai Ramayana version 'Ramakien', reveal instances of Buddhist Modification. The Ramayana by the great sage Valmiki is considered by Indians to be the first great literary work to be produced in India. The influence of this work is to be seen not only through centuries but even in other countries, such as Thailand where there are modified modern versions. In this paper, I have three objectives : (1) I may discuss the epic Ramayana of India gave birth to the Ramakien of Thailand. In modern times Valmiki's epic was made to fit the spiritual trends current in the new Chakri dynasty, which were themselves based on Brahmanic tradition and Theravada buddhism. With regarding to the structure of the Traibhumi cosmography, and the relationship between merit and power implied by this cosmography ranks all beings from demons to deities in a hierarchy of merit which accrues according to karma the actions of past lives. (2) I analyze how to have attempted to dissect the Hindi and Thai version of the Ramayana. The Hindu concept of kingship is also depicted in the life of Rama. The Hindus see in Rama the norm of a true Hindu life characterized by the Caste and Dharma. In Thai transformed version, it does not preach Hindu values of personal or social life. The Ramakien emphasized that the Buddhism were higher than all other laws, and that the King is regarded as the incarnation of Phra Ram, and thus is also the narration of the righteous buddhist ruler. (3) I discuss how cultural or social contexts can influence the structure of the royal Wat. The whole epic was painted by the order of Rama I in the galleries of the Wat Phra Keo. In other words, it is the very centre of the dynastic cult enshrining the Emerald Buddha, the most iconic expression of the Ramakien tradition were officially amalgamated. Rama I was continued the process of elaborating and stabilizing the complex religious pattern, with Buddhism at the pinnacle. My finding will support the idea that the Ramakien is particularly appealing to the Thai people because it presents the image of an ideal king, Rama, who symbolizes the force of virtue or dharma while Thotsakan represents the force of evil. Eventually the force of good prevails. Being Buddhists, the Thai poets bring into the story the Buddhist philosophy(especially, the law of cause and effect, karma). This paper examines the role of the Hindu epic Ramayana in the historical and cultural contact between Hindu India and Buddhist Southeast Asia. It should now be possible to evaluate what elements of Hindu culture were transmitted into Thai through the Rama story.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.47-53
• /
• 2022

As the limit state design method is applied as a method of designing concrete structures, the ultimate state is considered in the analysis or design. In fact, when the reinforced concrete member bears tensile force, the force is transmitted from the rebar to the concrete, and the structure bears the tensile force to the ultimate state even after yield. Therefore, the accurate evaluation of behavior after yield, it is necessary to study the tension stiffening effect after yield of the flexural member. In this study, a 4-point bending test was conducted on the RC simple beam having a rectangular cross section of the double reinforcement, and the behavior of the member was analyzed in detail using the image analysis method. Using the analysis results, the estimation formula for the tension stiffening effect after yield was proposed, and the applicability of this was verified through the experimental results of existing study. The difference between the ultimate strain and the yield strain representing the ductile behavior of the member is similar to the experimental results. The prediction of the proposed formula is relatively accurate.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.3
• /
• pp.183-191
• /
• 2002

In general, the salient features of the floating breakwater have excellent regulation of sea-water keeping the marine always clean, up and down free movement with the incoming and outgoing tides, capable of being installed without considering the geological condition of sea-bed at any water depth. This study discusses the three dimensional wave transformation of the floating breakwater moored by piers, and its dynamic response numerically. Numerical method is based on the boundary integral method and eigenfunction expansion method. It is known that pier mooring system has higher absorption of wave energy than the chain mooring system. Pier mooring system permit only vertical motion (heaving motion) of floating breakwater, other motions restricted. It is assumed in the present study that a resistant force as friction between piers and floating pontoon is not applied far the vertical motion of the floating breakwater. According to the numerical results, draft and width of the floating breakwater affect on the wave transformations greatly, and incident wave of long period is well transmitted to the rear of the floating breakwater, And the vertical motion come to be large for the short wave period.