• 한국멀티미디어학회논문지
• /
• 제18권8호
• /
• pp.909-914
• /
• 2015

In wireless sensor networks, sensor nodes have a short transmission range and data is transferred from source to destination node using the multi-hop transmission. Sensor nodes are powered by battery and the link qualities are different, and the routing protocol in the wireless sensor network is one of the important technical issues. Multipath routing was proposed to reduce the data congestion and increase data throughput. In the multipath routing, however, each path can be interfered by the other path, and it can aggravate network performance. In this paper, we propose the multipath routing scheme for multi-rate wireless sensor networks. The multipath routing selects transmission paths to minimize transmission delay and path interference.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.191-194
• /
• 2004

This study Is an measurement and prediction of transmission loss through dash panel with multi-path in a vehicle. Measurement results of transmission loss are decided by sound power measured using the sound intensity method under locating a sound source in the anechoic room and reverberant room, respectively. Prediction one is decided by multi-path analysis of dash panel composed by a various part of materials and complicated shape. Finally, two results show a great agreement between measured and predicted transmission loss.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1909-1915
• /
• 2004

The hermetic rotary compressor is one of the most important components of an air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration occurs due to gas pulsation during the compression process and to unbalanced dynamic force. In order to reduce noise and vibration, it is necessary to identify their sources and transmission path and effectively control them. Many approaches have been tried in order to identify the noise transmission path of a compressor. However, identification has proven to be difficult since the characteristics of compressor noise are complicated due to the interaction of the compressor parts and gas pulsation. In this study, the statistical energy analysis has been used to trace the energy flow in the compressor and to identify the transmission paths from the noise source to the exterior sound field.

• 한국통신학회논문지
• /
• 제32권8B호
• /
• pp.482-491
• /
• 2007

본 논문에서는 무선 센서 네트워크에서 에너지 효율적이고 신뢰성 있는 메시지 전송을 제공하는 k-독립경로 라우팅 알고리즘을 제안한다. 제안하는 알고리즘은 중요한 이벤트가 발생하지 않는 경우에는 단일 경로를 통해서 메시지를 전송하여 에너지 효율을 높인다. 하지만, 중요한 이벤트가 발생한 경우에는 k개의 독립경로를 통해서 메시지를 전송함으로써 요구되는 메시지 전송 신뢰도를 보장한다. 수집되는 데이터의 패턴을 관찰함으로써 중요한 이벤트의 발생 유무를 감지하고, 타깃 전송률과 검증된 고장 모델을 통하여 독립경로의 수(k)를 산출한다. 시뮬레이션 결과에서 제안하는 알고리즘은 기존 라우팅 알고리즘에 비해 노드 고장에 견고하였고 다중 경로 및 경로 복구 알고리즘보다 에너지 소모를 줄이고 평균 지연을 감소시켰음을 보여주었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.271-287
• /
• 2013

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3081-3099
• /
• 2012

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• 한국정보통신학회논문지
• /
• 제23권8호
• /
• pp.1011-1017
• /
• 2019

본 논문은 무선 애드혹 네트워크에서 신뢰성이 보장되는 데이터 전송을 위해 다중 경로를 설정하는 노드분리 경로문제를 해결하기 위한 강화학습을 제안한다. 노드분리 경로문제는 소스와 목적지사이에 중간 노드가 중복되지 않게 다수의 경로를 결정하는 문제이다. 본 논문에서는 기계학습 중 하나인 강화학습에서 Q-러닝을 사용하여 노드의 수가 많은 대규모의 무선 애드혹 네트워크에서 전송거리를 고려한 최적화 방법을 제안한다. 특히 대규모의 무선 애드혹 네트워크에서 노드분리 경로 문제를 해결하기 위해서는 많은 계산량이 요구되지만 제안된 강화학습은 효율적으로 경로를 학습함으로써 적절한 결과를 도출한다. 제안된 강화학습의 성능은 2개의 노드분리경로를 설정하기 위한 전송거리 관점에서 평가되었으며, 평가 결과에서 기존에 제안된 시뮬레이티드 어널링과 비교평가하여 전송거리면에서 더 좋은 성능을 보였다.

• 한국컴퓨터정보학회논문지
• /
• 제22권12호
• /
• pp.95-100
• /
• 2017

In this paper, we propose a zone based ad hoc network construction scheme which support ad hoc path between nodes in local IoT networks consisting of IoT devices with the constrained feature, such as low power, the limited transmission rate and low computing capacity. Recently, the various routing protocols have been studied to support ad hoc networking of local IoT environments. This is, because basis RPL protocol is deigned to be used for the connecting service with Internet through gateway, ad hoc path between nodes in local IoT networks is not supported in basis RPL protocol. Thus, in this paper, the proposed routing scheme provides both ad hoc path and Infra path through gateway, supporting basis RPL protocol simultaneously. Through simulation, we show that the proposed routing scheme with zone based path selection scheme improves the performance of the success rate of end-to-end data transmission and the end-to-end delay, compared to basis RPL protocol.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1071-1077
• /
• 2010

The reduction of the vehicle interior noise has been the main interest of noise and vibration harshness(NVH) engineers. A passenger vehicle has various and complicated transmission paths of sound and vibration. In order to identify the mechanism of transfer path, estimation of excitation force and exact modeling of transfer path are required. This paper presents method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. And vector synthesis technique is employed to identify the characteristics of road noise and its transmission to vehicle compartment through noise and vibration analysis. Vibration reduction efficiency of each transfer path is evaluated by comparing individual vector components obtained virtual simulation.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.