• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 2003

This paper presents an approach to estimate the power transmission line parameter by phasor measurement units(PMUs), which are synchronized to 1 pps signal of GPS. Existing approaches to estimate power transmission line parameter, are mainly off-line ones, based on faults or switching events on other neighboring lines. In this paper, to obtain static and dynamic properties of power transmission line parameter in service, the prototype of pmu-based Transmission Line Parameter Monitoring System (TLPMS) is proposed. Also, an technique to estimate parameters of transmission line described as 2-port network model and the soundness of estimated parameters are addressed.

• Journal of Information Processing Systems
• /
• 제16권2호
• /
• pp.394-405
• /
• 2020

The parameters of transmission lines have an influence on the electromagnetic environment surrounding the line. This paper proposes a method based on phasor measurement unit (PMU) and supervisory control and data acquisition (SCADA) to achieve online estimation of transmission line full parameters, such as resistance, reactance and susceptance. The proposed full parameter estimation method is compared with the traditional method of estimating resistance independently based on SCADA system. Then, the electromagnetic environment is analyzed based on the different parameter estimation methods. The example results illustrate that online estimation of transmission line full parameters is more accurate in the analysis of electromagnetic environment, which further confirms its necessity and significance in engineering application.

• 유공압시스템학회논문집
• /
• 제1권2호
• /
• pp.20-25
• /
• 2004

In this study, a position control characteristics of pneumatic cylinder with transmission line is analyzed. Dynamic characteristics of transmission line using compressible fluid is changed by the flowing stiles of the fluid the diameter and the length of the line. But, the effect of the change of dynamic characteristics of transmission line by the flowing states on the position control characteristics can be neglected because of the friction force of the pneumatic cylinder. So, We assume that the position control characteristics is affected by the diameter and length of the transmission line. The experimental results according to the change of parameter of the transmission line show that the relation between the parameter of the transmission line and the position control characteristics of pneumatic cylinder driving system with the transmission line.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.344-353
• /
• 1994

This study numerically analyzed the dynamic characteristics of the frequency response on the pneumatic transmission line with load impedances. The pressure transfer function is represented by the distributed parameter line model. To validate the mathematical approximations of Bessel function ratios, the results of frequency response in a blocked line were compared with those obtained by the Infinite-product, Brown's and Square-root approximations. Special emphasis was given to the frequency response characteristics on the pneumatic transmission line with load impedances. Computations were carried out for the wide range of parameters in terms of load capacitance ratio and load resistance ratio. The present results indicated that the theoretical model is capable of accurately predicting the frequency response characteristics for any configuration of a fluid transmission line.

• Journal of Information Processing Systems
• /
• 제15권2호
• /
• pp.386-398
• /
• 2019

The transmission capacity of transmission lines is affected by environmental parameters such as ambient temperature, wind speed, wind direction and so on. The environmental parameters can be measured by the installed measuring devices. However, it is impossible to install the environmental measuring devices throughout the line, especially considering economic cost of power grid. Taking into account the limited number of measuring devices and the distribution characteristics of environment parameters and transmission lines, this paper first studies the environmental parameter estimating method of inverse distance weighted interpolation and ordinary Kriging interpolation. Dynamic thermal rating of transmission lines based on IEEE standard and CIGRE standard thermal equivalent equation is researched and the key parameters that affect the load capacity of overhead lines is identified. Finally, the distributed thermal rating of transmission line is realized by using the data obtained from China meteorological data network. The cost of the environmental measurement device is reduced, and the accuracy of dynamic rating is improved.

• 한국정보통신학회논문지
• /
• 제6권4호
• /
• pp.589-594
• /
• 2002

Hairpin 형태의 필터는 크기를 작게 설계할 수 있지만 설계방법이 복잡하다는 단절이 있다. 본 논문에서는 기존의 전송선로 이론과 J 인버터 회로를 이용하여 Hairpin Line 필터 설계에 새롭게 적용하였으며, 설계하는데 필요한 J 와 b 파라미터를 정확히 구하는 방법을 제시하고 있다. 인접하는 소자간의 상호 결합이 없는 부분을 고려하였으며, 각 단에서의 결합성분에 대한 전기적인 결합선로 길이를 J 와 b 파라미터로부터 구할 수 있다. 제시하고 있는 설계방법으로 Serenade 8.0을 이용하여 중심 주파수 2.6GHz에서 동작하는 소형의 Hairpin Line 대역 통과 필터를 설계하고 컴퓨터 시뮬레이션을 통하여 특성을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.586-593
• /
• 2017

Modeling busbar distribution system as a transmission line is an important subject of power line communication in the smart grid concept. This requires extraction of busbar RLGC parameters, accurately. In this study, a comparison is made between conventional and modified method for the aspect of optimum RLGC parameters extraction in the 1 MHz to 50 MHz frequency band. The usefulness of these methods is shown both in time and frequency-domain analysis. The frequency-domain analyzes show that the inherent power of modified method can eliminate the errors especially due to the discontinuities arise in conventional method. This makes the modeling approach of modified method more advantageous for the busbars due to its robustness against disturbances in the S-parameters measurements which cannot be eliminated with the calibration procedure. On the other hand, time-domain simulations show that the transmission line representation of the modified method is closer to physical reality by handling causality issues.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.73-80
• /
• 2013

본 논문에서는 전송선의 정확한 고주파 특성화를 위해 실험적 접근을 기반으로 한 회로모델을 제안한다. 측정 시 불가피하게 발생하는 공진현상으로 인하여 배선의 길이에 상응하는 공진주파수에서 특성 임피던스 및 전파상수를 정확히 결정하기 어렵다. 따라서 물리적 통찰 및 이론을 바탕으로 이러한 공진효과가 배제된 전송선 파라미터 결정 방법이 제시되었다. 또한 고속신호의 전파 특성화를 위해 실험적으로 결정된 파라미터를 사용한 고주파 회로모델이 제안되었다. 본 논문에서 제안한 주파수 종속 전송선 파라미터 모델은 측정을 통해 검증되었으며, 고속 신호의 전파 특성화에 유용하게 적용될 수 있다.

• 한국전자파학회지:전자파기술
• /
• 제27권3호
• /
• pp.17-27
• /
• 2016

In the high-frequency characterizations of planar circuit components, measurement data may not be physical. It is mainly due to resonance effects concerned with discontinuities which are inevitable for a planar component characterization. In this paper, a novel accurate transmission line characterization method is presented that excludes the resonance effects based on measurement data reconfirmation. For the physically obvious data acquisition near the resonance frequencies of a transmission line, the additional lines with different line lengths are fabricated on the same substrate. The test transmission lines are characterized by using vector network analyzer (VNA) in 100 MHz to 26.5 GHz. It is shown that an accurate transmission line characterization can be achieved with the proposed measurement data reconfirmation technique.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1172-1182
• /
• 2014

최근 모바일 기기는 더욱 더 경량화, 집적화되고 있을 뿐만 아니라, 안테나 출력의 향상을 위해 주파수 대역이 높아지면서 안테나로부터 방사되는 전자파가 기기 내부의 회로에 영향을 주어, 전체적으로 기기의 성능을 악화시키는 EMI(Electro Magnetic Interference) 문제가 빈번히 발생하게 되었다. 본 논문에서는 기기의 안테나로부터 인접한 내부 전송선로에 전달되는 노이즈 전력을 예측하기 위한 방법론을 제시한다. 전송선로에 전달되는 노이즈 전력은 기본적으로 안테나 내부 임피던스와 전송선로의 부하 임피던스에 따라 달라지지만, 그 변화의 폭이 크지 않아서 안테나와 전송선로 사이의 S-parameter 제곱의 형태로 전달되는 전력 이득의 크기로 나타낼 수 있음을 보였으며, 이렇게 정의된 전력 전달 인덱스(index)를 이용하여 전송선의 기하학적 형태에 따라서 달라지는 노이즈 전력을 표현하였다. 그 결과, 안테나의 위치의 변화에 따라서 전달되는 노이즈 전력에는 많은 차이가 났으며, 특히 굽은 전송선로에서 많은 노이즈 전달이 발생함을 알 수 있었다. 또, 이와 같은 실험적인 결과가 EM 시뮬레이션을 이용한 결과와 잘 일치하였고, 근거리, 원거리장에서의 전기장 분포를 고려할 때 그 결과들이 물리적으로 유의함을 보였다. 본 논문에서 사용한 EM 시뮬레이터는 Ansys HFSS이며, FPCB에서 많이 사용하는 Ground가 있는 CPW(Coplanar Waveguide) 형태의 전송선로를 사용하였다.