• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.214-222
• /
• 2008

일반적으로 손실이 없는 우형 전송선 모델에 직렬 커패시터와 병렬 인덕터를 삽입하여 만든 우좌형 전송 선로에 손실을 고려한 등가 회로를 제안한다. 제안된 식을 이용하면 원하는 주파수에서의 위상 조절이 가능하며, 단위 셀을 점차 늘려갈수록 발생하는 방사율에 대한 조정 역시 용이하게 된다. 단위 셀의 구조의 증가는 안테나의 배열과 같으며, 이러한 배열 구조에서는 균등한 방사가 요구된다. 따라서 방사율의 조정을 위한 식은 일반적인 마이크로스트립 기판에 제작된 평면 안테나에 비해 소형화된 안테나를 구성하는데 적용될 수 있다. 그리고 회로 시뮬레이션과 EM 시뮬레이션 사이에서 발생하는 방사율에 대한 편차는 수정된 식을 적용하면 부합된 결과를 얻을 수 있으므로 간단한 방사 구조의 설계시 간편하게 이용할 수 있을 것으로 기대된다.

• 한국지능시스템학회논문지
• /
• 제20권1호
• /
• pp.48-53
• /
• 2010

본 논문에서는 첨단 IT(Information Technology) 기술을 전통산업인 집진기에 융합한 지능형 원격 집진기 bag 제어 시스템을 이벤트 기반으로 개발하였다. 먼저 전력선 통신을 이용하여 집진기 bag 상태 정보를 효율적으로 전송할 수 있도록 메시지 형식을 정의하였다. 그리고 집진기와 집진기 bag을 논리적으로 모델링하기 위해 자료형을 정의하였고, 이를 이용해 집진기와 집진기 bag을 XML과 객체지향 모델링 기법을 이용해 모델링하였다. 뿐만 아니라 집진기 bag의 교체시기를 정확하게 지능적으로 파악할 수 있도록 사례들을 수집하여 XML로 표현하고, 그 사례를 기반으로 현재 집진기 bag 상태를 사례기반 추론 기법을 이용하여 추론한 후 집진기 bag의 교체시기를 관리자에게 실시간으로 제시하도록 개발하였다.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.159-164
• /
• 2005

최근 정보량의 증가로 고속 디지털 회로를 요구하고 있다. 이에 따라 소형 고주파 회로에 전자기 특성이 중요하게 대두되었다. 그래서 불완전한 그라운드 상에 PCB 회로의 고속 디지털 전송라인에 대한 신호 집적도와 두 평행 선로 사이의 결합특성을 3차원 전자기 해석법인 시간영역 유한차분법을 이용하여 해석하였다. FDTD 시뮬레이션 결과는 상용 회로 소프트웨어 툴인 ADS 시뮬레이터와 비교하였고, 집중 소자 모델링, 주파수에 따른 슬롯에 의한 전자파의 방사 등을 해석하였다. 결과로써 마이크로스트립 선로 아래 슬롯이 있는 경우 신호의 전송에 큰 영향을 끼치는 것을 알 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.521-531
• /
• 2018

This paper presents a procedure for field measurements which provides a generalized Narrowband Power Line Communications (NB-PLC) channel model for low voltage (LV) access network in order to deploy advanced metering infrastructure (AMI) within Lahore, Pakistan. The measurements of allocated sites were performed in the residential (urban and rural), industrial and commercial electricity consumers for the NB-PLC channel modeling of overhead transmission lines (TLs). On the basis of extensive field measurement results, the average attenuation profile and transfer functions are presented. The results obtained from field measurements are validated by comparing them with a proposed Simulink model. A close agreement in the measured and simulated transfer function (TF) results is observed. The proposed Simulink model is an effort to model the NB-PLC channels in an effective way, especially in South Asian countries.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1105-1110
• /
• 2007

This paper describes an equivalent circuit modeling of 4-port connector system. A coupled transmission line was designed and fabricated, mimicking a 4-port connector system, and then S-parameters were measured using 4 port VNA (Vector Network Analyzer). The S-parameters from measurement and from Full-wave simulator coincided quite nice. By using these S parameters, an equivalent circuit parameters for a 4-port system was obtained. The time domain response from the equivalent circuit model matched to the signals, which was measured using TDR(Time Domain Reflectometry) meter. We were also convinced that there should be enough bandwidth to get a meaningful time domain result from Fourier inverse transformation of the S parameters. In addition, we applied the conversion algorithm to the 4-port connector system, which calculates the S-parameters of a 4 port system using the data from a 2-port VNA with the other ports open. Comparison of the two data, one from measurement and the other one from the conversion algorithm, was made in this manuscript.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.945-948
• /
• 1992

In this paper, switching overvoltages are analyzed for future 765kv power system using EMTP(Electro Magnetic Transient Program) and compared with TNA (Transient Network Analyzer) study results which was previously undertaken during overseas training in 1980 and 1988. The result shows the maximum of 2.10 PU at midpoint of 310Km transmission line which is higher than those of TNA study by 0.4 PU. The deviation of EMTP result from TNA is caused by limitation of nonlinear representation and also frequency dependent modeling in EMTP. Further analysis are required to get more exact switching overvoltage factors for future KEPCO 765KV system not only by EMTP but also TNA.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.440-444
• /
• 2016

In this paper, an equivalent circuit model for near-field noise emission is proposed to implement a multimedia operation-monitoring system for mobile devices. The proposed model includes a magnetic field probe that captures noise emissions from multimedia components, and a transfer function for near-field noise coupling from a transmission line source to a magnetic field probe. The proposed model was empirically verified with transfer function measurements of near-field noise emissions from 10 kHz to 500 MHz. With the proposed model, a magnetic field probe was optimally designed for noise measurement on a camera module and an audio codec in a mobile device. It was demonstrated that the probe successfully captured the near-field noise emissions, depending on the operating conditions of the multimedia components, with enhanced sensitivity from a conventional reference probe.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2004년도 하계학술대회
• /
• pp.386-389
• /
• 2004

This thesis complemented the weak points that the existing theses did not represented a phase characteristic as the equivalent circuit by applying 4-port simulation to DGS (Defected Ground Structure) characteristic and an equivalent circuit, which are the transmission line structure that has the defect made in the ground surface. We used a distribute device and a lumped device, obtained the equivalent circuit by applying the structure of balun to a discontinuous part. An indicated DGS (Defected Ground structure) is a dumbbells-shaped single defect, we indicated satisfying a magnitude and phase characteristics by applying this equivalent circuit.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.45-49
• /
• 2000

Vibration and noise problem in a hydraulic system became one of very important factors in evaluating the performance of a hydraulic system. It is known that vibration and noise in a hydraulic system is directly related to flow pulsation in the hydraulic pump in the system. This study investigated a modeling and simulation technique for pulsating flow in a swash plate type axial piston pump. The key design factors of the pump related to flow pulsation phenomenon of the pump are the physical parameters for notches on the valve plate of the pump. By the numerical analysis, effects of the physical parameters of the notch on the flow pulsation was elucidated.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.787-798
• /
• 1995

We implement the E-plane T-juncition manifold mutiplexer having low insertion loss for output multiplexer of Ku-band satellite transponder. Manifold multiplexer implemented here is composed of 2 channel filters, T-junctions, half-wave waveguide connecting channel filters and manifold, and manifold itself.[1-4] Considering the mass and volume of the satellite transponder, the channel filters are designed to dual-mode.[5-13] And Elliptic filter function is used, which has good characteristics of suppressing the interference between 2 channels. Since the performance of manifold multiplexer depends on the manifold waveguide transmission line length, it's necessary proper analysis. In this paper, we do optimization process of T-junction and other elements by using CAD and implement the manifold multiplexer. An experiment shows that characteristic response of multiplexer matches wel its modeling result.