• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.268-278
• /
• 2001

To investigate sedimentary facies and environmental changes of the Nakdong River Estuary and its adjacent coastal area, the grain size analysis and measurement of organic matter, calcium carbonate, clay mineral and metallic elements were carried out for forty surface sediment samples. Based on regional distribution pattern and characteristics of the surface sediments, sedimentary facies in the study area can be divided into sand facies (TYPE I), mud facies (TYPE II) and sand-mud mixed facies (TYPE III). TYPE III is the transition of TYPE I and TYPE II in every aspects of sediment characteristics. It suggests that TYPE III may have been formed by the mixture of two different source of sediment : one derived from Nakdong River and the other resuspended fine-grained sediments from the Jinhae Bay by winnowing action during floods or storms. Among many aspects of environmental change after the construction of the Nakdong Barrage, the most significant is the increase of sand content off the sand barrier region. It could be explained by several reasons including decreased input of fine-grained sediment from river, increased hydrodynamic energy level off the sand barrier region and artificial effects such as dredging and dumping.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.53-57
• /
• 2010

The influence of CaO addition on the crystallization temperature, crystal types, and microstructure of L-A-S ($Li_2O-Al_2O_3-SiO_2$) glass-ceramics system fabricated from a coal bottom ash, produced at thermal power plant, was studied. The glass transition and crystallization temperatures were shifted to the higher temperature position with increasing CaO content in a non-isothermal analysis using a DTA. The major crystalline phases of L-A-S glass-ceramics system produced were identified as ${\beta}$-spodumene ($LiAlSi_2O_6$) and eucryptite ($LiAlSiO_4$). The glass-ceramics showed a bulk and surface crystallization behavior at a time. With increasing CaO content, the ${\beta}$-spodumene peak in XRD increased and some CaO-related phases were formed. The surface crystal grown from the exterior to the center in glass-ceramics showed various shapes by amount of CaO added. Some cracks were generated at the glass-ceramics containing CaO above 9 wt% due to the mismatch of thermal expansion coefficients between a ${\beta}$-spodumene and CaO-related crystal phases.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.1-13
• /
• 2016

In an effort to establish adaptive measures for low carbon use and climate change, this study developed storylines for shared socio-economic reference pathways(SSP) and simulated change in land use for each storyline. First, cellular automata modeling was performed using past data, and a transition rule for the local characteristics of each planning area under study was derived by comparing with the results of the base year. Second, three storylines were formulated based on the hypothesized change in land use for the SSP. SSP1, the scenario for sustainability, assumed that the land was developed into a compact city, SSP2 assumed the development of a road through the middle of the land while maintaining the current situation, and SSP3 assumed unsustainable development into a fragmented world. Third, change in land use depending on planning area was predicted by integrating the SSP scenarios with cellular automata(CA) modeling. According to the results of analysis using the SSP scenarios, the urban area ratio increased slightly up to 2020 in SSP1 and up to 2030 in SSP2 and did not change any more subsequently, but it increased continuously until 2050 in SSP3 that assumed low level urban planning. These results on change in land use are expected to contribute towards making reasonable decisions and policies on climate change, and the outcomes of simulation derived from spatial downscaling, if applied to vulnerability assessment, will be useful to set the priority of policies on climate change adaptation.

• International Commerce and Information Review
• /
• v.13 no.1
• /
• pp.245-270
• /
• 2011

It is known that weak competitiveness of micro enterprises can be overcome when they are organized with enterprise associations, franchise systems, and joint affiliation. In this paper, we empirically analyze the determinants of organization of micro enterprises, and propose the policy implementations to enhance the competitiveness of micro enterprises as a measure to reduce trade conflict due to SSM entry restrictions. Logit estimation results based on survey data consisted of 467 samples, show that insufficient labor force and high material costs had negative effects on organization. The unexpected findings generally support the rationale that organization is not helpful to solve insufficient labor force and high material costs. However, the decrease in sales due to the economic recession and the decreasing number of customers due to customer transition to large enterprises had a more positive effect on organization than usually expected. There are differences in estimation results between two types of business(restaurants and retail). In case of the restaurant business, insufficient labor force, high material costs and a decreasing of number of customers are important factors for organization, while the sales decrease is a relatively important factor in the case of retail businesses.

• Korean Business Review
• /
• v.19 no.2
• /
• pp.183-206
• /
• 2006

Recently, the notion of "increasing returns" has been popular not only in academia but also in industries. This notion has been drawn from prior research on network effects, which showed that the market evolution would lock in to a dominant technology. However, the long history of technological change has rarely shown the possibility of lock-in to an inferior technology. How could the market with network effects make transition between incompatible technologies regimes by escaping the lock-in? This paper analyzes the effectiveness of R&D and technological choice to investigate the sources of the dynamic capabilities in the presence of network effects and uncertain technological progress. Why does the market sometimes work against a radical technology, and why, at other times, does the market operate in favor of it? This study is to address this question by modeling the situation of two competing technologies in the presence of network effects. The numerical analysis indicates that the evolution strategy of compatibility is more likely to increase the chance of firm growth when a majority of customers are not power users or when demand for an old technology has been escalated. But when there are a substantial number of power users or when a new technology emerges before such an escalation of demand, the revolution strategy of compelling performance is more likely to be effective. The result suggests a potential mechanism for overcoming the lock-in problem. When the market exhibits some inertia to an obsolete technology, which is reinforced by the increasing customer value with respect to backward compatibility, the survival of a new technology depends on power users. When many power users are cultivated by firms' technological efforts regarding the new technology, the market is less likely to lock into an obsolete technology. Indeed, in the workstation market, where power users characterize much of the demand, innovators like Sun successfully switched to the RISC architecture.

• Journal of Adhesion and Interface
• /
• v.17 no.1
• /
• pp.7-14
• /
• 2016

Epoxy composites with concentrations of 5-70 wt% of silica particles were prepared in order to improve mechanical property and poor thermal stability. The mechanical and thermal properties were investigated and compared to the corresponding properties of neat epoxy composite. Furthermore, the effects of silane compound treatment on silica particles were observed by the experimental results of the tensile strength, glass transition temperature, and thermal stability of epoxy composite. Tensile strength of epoxy composites was measured by universal testing machine (UTM) and after that, the structure and morphology analysis of epoxy nanocomposites were analyzed by field emission scanning electron microscope (FE-SEM) and energy dispersive spectroscopy (EDS). The increased solid content of CA0030 particle improved the tensile strength of epoxy/ modified composites to give 30-50 MPa. The thermal expansion coefficients (CTE) of neat epoxy resin and epoxy/silica composites measured with a thermomechanical analyzer (TMA) showed that the incorporation of silica particles was helpful to reduce the CTE of neat epoxy resin.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.765-773
• /
• 2017

With the end of the HFA (Hyogo Framework Action) in 2015, SFDRR (Sendai Framework for Disaster Risk Reduction) was adopted as a new agenda for disaster risk reduction at the 3th WCDRR (World Conference on Disaster Risk Reduction), held in March 2015. Continued understanding of the international agenda for reducing disaster risk is critical to disaster risk reduction at the national level as well as international level. Therefore, in this study, we analyzed major changes in the international agenda for disaster risk reduction as the transition from HFA to SFDRR, and analyzed South Korea's major achievements in the HFA and the implementation status of SFDRR in South Korea. In addition, SFDRR emphasizes the role of science and technology in policy making, and examined research trends in science and technology. 49.9% of the efforts were made to prevent the disasters during the disaster management stage, and plans related to priority 1 (40.4%) and 4 (35.8%) were mainly promoted. Science and technology research and development for disaster management were analyzed as active, but 79.7% of the tasks were related to priority 4, and it is necessary to develop all four priorities. Recently, disaster management using next-generation disaster prevention technologies such as satellite technology and big data is required, and it is expected that it will contribute effectively to mitigate disaster risk through establishment of education and policy to support it.

• Journal of Korean Academy of Nursing
• /
• v.26 no.3
• /
• pp.531-543
• /
• 1996

This study was done to develop a Maternal Identity Scale for Pregnant Women and to test the validity and reliability of the scale. A convenience sample of 161 pregnant women were asked to complete the MISP questionnaire which consisted of 45 item, this was done from December 20, 1995 to January 15, 1996. The research procedure were as follows. The first step was to identify a conceptual definition of maternal identity using Robin(1984)'s maternal identity and maternal experience during pregnancy. The second step was to operationalize the maternal identity, that is, perception of image possible of selves as mother, maternal role play by imagination, and the experiences of various emotional responses which are embedded in the mother-fetus dyad. The third step was item development which resulted in 45 items as appropriate measurement of maternal identity are except for the perception of image possible of selves as mother. The result findings were as follows : 1) Four factors for MISP (finally 40 items) were extracted through the principal component analysis and varimax rotation, and these contributed 49.3% of the variance in the total score. All 40 items in the scale loaded above .43 on one of 4 factors. 2) Each factor was named : factor 1 was named maternal role imagery and has 10 items, factor 2 was named happiness and has 11 items, factor 3 was named maternal fetal interaction and has 10 items, and the last factor 4 was named negative emotion and has 9 items. 3) Cronbach's -alpha coefficient for internal consistsncy was .92 for the total 40 items and .89, .90, .86, .78 for the four subscales in that order. Recommendations are suggested below : 1) The developed MISP be used to assess maternal readiness in pregnancy. 2) Replication study be done to test validity and relaibility. 3) For the overall measure of Maternal Identity in Pregnancy, scale for the perception of image possible of selves as mother, and cognitive domain be reorganized for the maternal identity in pregnancy. 4) It is necessary to identify variables that influences maternal pregnancy. 5) It Is necessary to identify that maternal identity in pregnancy is a reliable index of motherhood, to do correlation studies on maternal identity and major maternal variables in maternal transition period, to reoperationalize the maternal identity in postpartum, and finally to designate a longitudinal study of the maternal identity changes or stabilities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.616-621
• /
• 2017

The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.409-414
• /
• 2001

Biosynthesis of curdlan( ${\beta}$-1,3 glucan) was shown by fluorscence on cellufluor medium. The highest production of curdlan was produced when glucose was used as a carbon source and ($NH_4$)$_2$$SO_4$ was used as a nitrogen source. ${\beta}$ -form of curdlan was detected in the fingerprint region (890 $cm^{-1}$) by FT-IR spectrum and shown homogeneous ${\beta}$ -1,3 glucan by $^{13}C$ NMR spectrum ($C_1$-103 ppm, $C_2$-73.2 ppm, $C_3$-86.4 ppm, $C_4$-68.7 ppm, $C^{5}$-76.63 ppm, $C_{6}$-61.2 ppm). Transition of structure from triple helix coil form to random coil form was appeared at 0.1 ∼0.25 M NaOH concentration. It was shown that natural curdlan is a triple helix form in neutral but becomes weak in alkaline condition.