• 소음진동
• /
• 제6권4호
• /
• pp.499-502
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under transient road-load condition and interior noise signal is transformed by using the transient signal analysis methods, such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise metrics such as the loudness, sharpness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running modes can be discussed in the viewpoint of noise quality.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.528-533
• /
• 2010

This paper describes a calculation method of source level of a ship transient noise, which is one of the important elements for the ship detection. Aim of transient noise measurements is to evaluate of acoustic energy due to singular occurrence, which is therefore defined as non-periodic and short termed events like an attack periscope, a rudder and a torpedo door. In generally, in the case of randomly spaced impulse, the spectrum becomes a broadband random noise with no distinctive pattern. Therefore, frequency analysis is not particularly revealing for type of signal. In the paper, it is performed in time domain to analyze a transient noise. However, a source level of transient noise is required an investigation for multiple frequency band. So, in order to calculate a source level of transient noise, a design of exponential weighting function, convolution, band pass filtering, peak detection, root mean square, and parameter compensation are applied. The effectiveness of this calculation scheme is studied through computer simulations and a sea test. Furthermore, an application of the method is applied in a real case.

• 자원환경지질
• /
• 제31권1호
• /
• pp.53-57
• /
• 1998

Transient electromagnetic (TEM) method is also affected by cultural and natural electromagnetic (EM) noises, since it uses part of the broadband ($10^{-2}$ to $10^5Hz$) spectrum. Especially, predominant EM noise which affects a moving transmitter-receiver TEM system is sensor motion-induced noise. This noise is caused by the sensor motion in the earth magnetic field. The technique for reducing the sensor motion-induced EM noise presented in this paper is based on Halverson stacking. This Halverson stacking is generally used in a time-domain induced polarisation (IP) system to reject DC offset and linear drift. According to spectrum analysis of the vertical component of sensor motion-induced noise, the frequency range affected by the motion of an EM sensor is less than about 700 Hz in this study. With the decrease of the frequency, the spectral power caused by the motion of a sensor increases. For example, at the frequency of 200 Hz, the spectral power of the sensor motion-induced noise is $-90dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$, and at the frequency of 100 Hz, the spectral power of the sensor motion-induced noise is $-70dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$. With applying Halverson stacking to an artificial noise transient generated by adding a noise-free transient to sensor motion-induced noise measured without pulsing, it is shown that the filtered transient is nearly consistent with the noise-free transient within a delay time of $0.5{{\mu}sec}$. The inversion obtained from this filtered transient is in accord with the true model with an error of 5%.

• 한국음향학회지
• /
• 제31권1호
• /
• pp.29-38
• /
• 2012

본 논문에서는 음성 신호에 더해진 돌발 잡음을 제거하는 시스템을 제안한다. 제안한 돌발 잡음 제거 시스템은 중앙값 필터를 이용하여 돌발 잡음을 제거한다. 중앙값 필터는 잡음을 제거하는 과정에서 음성을 왜곡시킬 수 있기 때문에, 음성의 왜곡을 최소화하기 위하여 장구간 예측 필터를 전처리단으로 사용한다. 장구간 예측 필터로 보존된 음성 정보는 잡음이 제거된 후 다시 합성된다. 본 논문에서는 돌발 잡음이 존재하는 환경에서 음성의 정보를 보존하는데 있어 단구간 예측 필터의 문제점을 밝히고 장구간 예측 필터의 우수함을 보인다. 제안한 돌발 잡음 제거 시스템의 출력 신호는 입력 신호에 비해 음성이 존재하는 구간에서 신호 대 잡음비가 약 8dB 향상 되었으며, PESQ 점수가 약 1점 증가하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.752-757
• /
• 1994

Very often, one would like to have visual image of mechanical or acoustical events such as musical sound and transient vibrations. Conventional methods to visualize the signal, such as power spectrum, do not normally allow to cultivate the signal of interests due to their inherent limitation on transient signals. Other than the conventional method, one could use an instantaneous frequency which can reveal the variation of frequency in terms of time. Nevertheless it is quite sensitive to noise and can not resolve the frequency components of signals; normally produces additional components other than those of the signals. In this paper, we introduce the Wigner-Ville spectrum to see the transient characteristics of signal, especially musical sound and transient mechanical vibration signatures. For musical sound, several popular western classic music have been selected for the analysis. For the transient mechanical signature, the signals obtained from the car door experiment and the beam experiment are interpreted in terms of Wigner-Ville spectrum. Results demonstrate the visual expressions of transient signals; musical sound and vibrations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.577-582
• /
• 2012

Recently, noise reduction of air-conditioner is one of the important design factors for high quality product. Especially, customer complaints arise due to noise problem of the outdoor unit. After the operation of air-conditioner start, noise level of outdoor unit is increased gradually and sometimes abnormal noise occurs until it reaches steady state condition. The aim of this paper is to investigate the relation between noise of outdoor unit and thermodynamic properties of cycle at transient condition of room air-conditioner. In order to find out the noise characteristics of outdoor unit, noise and vibration measurements are carried out. Also, the thermodynamic properties of compressor and heat exchanger are measured by using temperature and pressure sensors and experimental results are discussed. Finally, we find out the relation between noise and cycle properties at starting of room air-conditioner and the improvement method to reduce noise level is proposed.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.71-77
• /
• 2020

In recent years, as a consequence of the technological advancements in the automobile industry and changes in consumer demands, the reduction of noise inside vehicles rather than vehicle performance has increasingly become an important factor of interest. To date, most studies have focused on noise and vibration reduction techniques for the engine and drive system of vehicles. In this research, a comparative analysis for reducing the effect of vehicle seatbelts on the transient response is performed using the test of vehicle conditions and transient response analysis in accordance with seatbelt conditions. After the sensitivity analysis, the specifications for improvement were designed based on the transient response analysis. It was confirmed that the transient response characteristics were improved by the transient response analysis and vehicle conditions test. Through computer-aided engineering, the transient response characteristics of seatbelts were checked with less cost and time.

• 한국정보통신학회논문지
• /
• 제16권9호
• /
• pp.1870-1877
• /
• 2012

천이신호는 지속시간이 짧으면서 길이의 변화가 크고, 시변성 및 비정재성 특성을 갖는다. 이러한 천이신호의 식별에는 분석 프레임 단위로 참조신호에 대한 기준패턴을 만들어 입력신호와의 유사도를 비교하는 방법이 효과적일 수 있다. 본 연구에서는 참조신호의 기준패턴으로 프레임 기반의 특징벡터들에 대해 확률통계 모형인 정규혼합모델을 적용하는 방법을 제안하고, 다양한 수중 천이신호에 대한 식별 실험을 통해 제안한 방법의 타당성을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.110-112
• /
• 2009

Transient acoustic pressure in the near field of an impacted plate carries information that can be utilized for recovering the impact force history. The inverse calculation approach using BEM-based NAH, which is conventionally used for time harmonic excitation, can be applied for reconstructing the transient waves using the principle of Fourier transform and spectral analysis. Then, using the recovered velocity in normal direction of the plate surface, the corresponding structural intensity can be obtained and the identification of input power can be performed. However, several manipulations should be given to overcome numerical artifacts, such as aliasing and erratic oscillation at discontinuity, and to suppress the effect of noise. Experiment using a simply supported plate is presented for demonstration purpose.

• 한국음향학회지
• /
• 제21권6호
• /
• pp.576-584
• /
• 2002

본 논문에서는 함정의 주요 식별인자인 천이소음을 측정하기 위하여 웨이브렛 패킷을 이용한 수중 배경잡음 및 외부 잡음을 제거하는 새로운 방법을 제안한다. 함정 천이소음은 해양환경 특성상 낮은 신호대 잡음비를 가지므로, 개별센서로 측정하기 위해서는 잡음 제거가 필수적으로 요구된다. 배경잡음을 제거하기 위해 웨이브렛 임계치를 각 노드에 일괄적으로 적용하는 기존의 잡음제거 방법은 다양한 외부 잡음이 존재하는 수중환경에서는 적합하지 못하다. 따라서 본 연구에서는 배경잡음 및 외부 잡음을 제거하기 위해 신호와 잡음을 구분하여 각 노드별 임계치를 차별 적용하며, 이러한 임계치에 따른 변형된 소프트임계처리법을 제안한다. 제안 기법의 타당성은 모의 시뮬레이션과 다중 개별센서를 이용한 해상실험을 통하여 확인한다.