• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.265-271
• /
• 2014

Implementation of smart embryo technologies in cattle e.g. ovum pick-up followed by in vitro embryo production (OPU-IVP). Seasonal variation is important factor for follicular growth, oocytes quality, quantity and developmental competence. Therefore the aim of present study was carried out to investigated whether the seasons (hot and cool) effect on follicular development, oocyte recovery and subsequent embryo development. Follicular oocytes were aspirated from Korean native cows (Hanwoo) by the ovum pick-up (OPU) method, which was performed 24 times during two different seasons, the hot (July to September) and cool (October to December), from OPU donors. The recovered oocytes were classified according to morphological categories and used for in vitro embryo production (IVEP). The mean number of total follicles was significantly higher (p<0.05) during the hot season ($18.32{\pm}2.26$) compared to cool season ($15.41{\pm}3.34$). Furthermore, seasons did not significantly effect on the number of oocytes recovered (hot season: 41.16% vs. cool season: 46.14%). However, the average number of Grade A oocytes was significantly greater during hot ($1.75{\pm}1.86$) season compared to the cool season ($1.00{\pm}1.46$), but there was no significant difference of other grades oocytes. The cleavage rate (hot: 66.67% vs. cool: 63.3%) and embryo development (hot: 58.95% vs. cool: 56.97%) did not differ significantly between the seasons. In conclusion, the results of present study suggest that the season (hot and cool) does not have effects on the oocyte recovery and embryo developmental competence of in vitro cultured embryos.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.241-248
• /
• 2014

This study was carried out to evaluate the effects of embryonic stage, cryoprotectant, and freezing-thawing method on the rates of survival and development of the cryopreserved mouse early embryo and finally to establish the cryopreservation method of surplus embryos obtained during assisted reproductive technology (ART). Two to eight cell embryos were obtained from oviducts of mated $F_1$ hybrid female mice superovulated by PMSG and hCG. Two-step EG, DMSO and 4-step EG, DMSO were used as cryoprotectant and dehydration and rehydration method of embryos, and slow-cooling or rapid-cooling method was used as frozen program. The survival rates of embryos were measured after thawing and rehydration, and the developmental rates of embryos were compared and observed during culturing embryos for 24, 48, 72, 96 hrs. As for the survival and development rates of embryos according to embryonic stage, the survival rate of 2 cell stage in EG and DMSO was significantly higher than 4~8 cell (65.4% versus 61.2%, 81.1% versus 72.5%) (p<0.01, p<0.01), but the development rates of 4~8 cell embryos in EG and DMSO were significantly higher than 2 cell embryos for whole culture period (p<0.01) and the development rates of 4~8 cell embryos in EG were significantly higher than 2 cell embryos in DMSO (p<0.01). As for the survival and development rates of embryos according to cryoprotectant, the survival rate of 2 cell embryo in DMSO was significantly higher than that in EG(77.0% versus 64.4%) (p<0.01), whereas the development rate of embryos was not differ till 24 hrs. The development rate from morular to hatching blastocyst, however, was sinificantly higher in EG than in DMSO during 48 hr (p<0.01). The survival rate of 4~8 cell embryo was 62.5% in EG and 73.3% in DMSO. The development rates of embryo in EG were significantly higher for whole culture periods (p<0.01, 0.05). In respect to the effect of freezing and thawing program on the survival and development rates of embryos, method of slow cooling and rapid thawing was more effective than that of rapid cooling and rapid thawing. The survival rate of embryo in 2 cell stage was higher than in 4~8 cell stage, and EG appears more effective cryoprotectant than DMSO because EG showed better development rates of embryos in 2 and 4~8 cell stage. Moreover, slow cooling and rapid thawing method was considered as the best cryopreservation program.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.313-319
• /
• 2014

Investigations for hematologic values and the differential count of WBC for Korean indigenous cattle (KIC) and Stripped Cattle (SC) are rarely performed. Therefore, when the index of complete blood counts (CBC) analysis of KIC and SC were requested, it had many difficulties to make the results for blood condition since the standard hematologic values of KIC and SC are lacking. The objective of this study was to investigated the hematologic values and the differential count of WBC for blood of total 19 striped cattle (SC) and 187 KIC as a control by estimation analysis of hematologic characteristics. As a result, the mean values of RBC and platelet of KIC were significantly decreased by age (P<0.05). The mean values of RBC, HCT, MCV and MCHC between KIC and SC of the same age (2~3 years) showed the statistical significance (P<0.05). Also, in the WBC of KIC, the mean values were decreased according to the age from $13.8{\times}10^3/{\mu}l$ under 1 year to $9.5{\times}10^3/{\mu}l$ over 5 years. In the differential count of WBC of KIC, it showed generally the rates of 46.2% lymphocyte and 36% segmented neutrophil. Additionally, in comparative analysis between pregnant and non-pregnant group of KIC, the mean values of Hg and HCT in pregnant group were significantly decreased(P<0.05). In conclusion, data obtained from this study may be valuable as a standard for interpretation of the results in hematologic analysis of KIC. Result of this study will be used for establishing reference range for hematologic analysis in SC.

• Journal of Embryo Transfer
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2017

Cryopreservation of germ cells from genetically proven animals could be a source of restoration tools from the risk of extinction or disappearance of wanted characteristics. Using frozen semen, the genetic gains of Korean native cattle have been increased greatly for 70 years. The preservation of genetic resources as a form of frozen semen straw has limited availability due to the numbers. To circumvent this weakness of frozen semen, we tested two re-freezing methods with different initial thawing temperatures using frozen Korean proven semen and rare breed semen from albino, black and chikso breeders. It has been known that human sperm could resist to cryo-damages by repeated freeze-thaw cycles, but not for Korean proven bulls number (KPN) or for rare breeds. Total 7 frozen semem from brindled(2), black(1), Korean Albino(2) and KPN(1) bulls were used for our research. After thawing straws under $5^{\circ}C/2min$ or $37^{\circ}C/40sec$ with low temperature water bath and thermo jug, spermatozoa were re-diluted with triladyl diluents after first thawing and re-frozen. Sperm motilities were compared between animals and treated groups after re-thawing. Mean values of motility and viability of refrozen/thawed sperm for expansion of the number of straws were significantly higher in $5^{\circ}C$ than in $37^{\circ}C$ (P < 0.05). However, the activity of viable sperm thawed at $5^{\circ}C$ was significantly decreased before refreezing. It is estimated that re-freezing of frozen semen from rare Korean native cattle is possible with resistant properties of survived spermatozoa.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.227-233
• /
• 2017

Pig has been known to be one of the most feasible animals as a bioreactor to produce pharmaceuticals in milk and as a mediator in xenotransplantation research. Previously, we generated transgenic pigs for both purposes, which were expressing Factor 8, vWF, hTPA, and hEPO in milk, along with expression of MCP at GalT gene locus ($GalT^{-MCP/-MCP}$) as well as expressing MCP at GalT gene loci with CD73 expression ($GalT^{-MCP/+}/CD73$). In this study, we performed comparative analyses of sperm parameters between wild type male (WT) pig and those transgenic males to examine the effects of transgenes integrated into the pigs on motility, morphology, viability, and acrosome integrity of the spermatozoa. Our results showed that the rates of actively motile spermatozoa of WT, Factor 8, vWF, hTPA, hEPO, $GalT^{-MCP/+}/CD73$, and $GalT^{-MCP/-MCP}$ pigs were 85.0%, 83.3%, 82.5%, 83.3%, 82.5%, 77.5%, and 78.7%, respectively. Whereas, the rates of morphologically normal spermatozoa of WT, Factor 8, vWF, hTPA, hEPO, $GalT^{-MCP/+}/CD73$, and $GalT^{-MCP/-MCP}$ pigs were 90.0%, 80.0%, 80.0%, 83.3%, 85.0%, 91.8%, and 80.8%, respectively. In addition, the viability in spermatozoa of WT, Factor 8, vWF, hTPA, hEPO, $GalT^{-MCP/+}/CD73$, and $GalT^{-MCP/-MCP}$ pigs were 93.9%, 82.4%, 89.9%, 83.9%, 87.4%, 92.8%, and 83.6%, respectively. The rates of spermatozoa with normal acrosome integrity in WT, Factor 8, vWF, hTPA, hEPO, $GalT^{-MCP/+}/CD73$, and $GalT^{-MCP/-MCP}$ pigs were 98.1%, 98.6%, 98.6%, 98.7%, 98.1%, 99.5%, and 95.1%, respectively. There were no significant differences in motility, morphology, viability, and acrosome integrity of the spermatozoa among WT, Factor 8, vWF, hTPA, and hEPO, $GalT^{-MCP/+}/CD73$, and $GalT^{-MCP/-MCP}$ pigs. These mean that neither random integration nor targeted integration of the transgene into chromosome of pig effect on characteristics of spermatozoa. Ultimately, the transgenic male pigs subjected in this study could apply to propagate their progenies for production of human therapeutic proteins and advancing the xenotransplantation research.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.10-10
• /
• 2017

Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.73-81
• /
• 2014

The in vitro production of porcine embryos was essential to increase of blastocyst development rate and select of high quality blastocyst in early stage. There were a lot of reports about in vitro porcine embryo development, but there was no report about the selection of high quality embryos. Therefore, in this study, we investigated the effect of vitamin $K_1$ (vit $K_1$) on the development and survival rate of porcine in vitro fertilized embryos. When vit $K_1$ was treated for 24 hr at day 1 in vitro culture, blastocyst development rate in the control group ($35.5{\pm}3.2%$) was significantly lower compared to $1.0{\mu}M$, $3.0{\mu}M$, or $6.0{\mu}M$ groups ($14.5{\pm}4.3$, 0.0, or 0.0%; p<0.05). The survival rates of blastocysts at day 8 in $1.0{\mu}M$, $3.0{\mu}M$ or $6.0{\mu}M$ of vit $K_1$ treated groups ($22.2{\pm}2.9$, 0.0 or 0.0%) were significantly lower than that of the control group ($31.8{\pm}2.6%$; p<0.05). We were added at $1.0{\mu}M$, $3.0{\mu}M$ or $6.0{\mu}M$ vit $K_1$ for different durations of time at day 1 in vitro culture. The development rate and survival rate in the group of $1.0{\mu}M$ vit $K_1$ for 6 hr was $26.5{\pm}2.9%$ and $47.2{\pm}2.8%$, respectively, which were differed significantly in the group of 12 hr (p<0.05). In the group of $3.0{\mu}M$ vit $K_1$, the blastocyst development in control group was $36.4{\pm}3.1%$ but, the survival rate $41.7{\pm}3.2%$ in the group of 3.0 hr was significantly higher than that of the control group (p<0.05). In the group of $6.0{\mu}M$ vit $K_1$, the control group's the blastocyst development was $32.0{\pm}2.8%$ and the 0.5 hr supplement group's survival rates was $42.9{\pm}1.8%$ higher than other groups. We added vit $K_1$ at day 1, day 2, day 4 and day 6 of in vitro culture, on the based the results of supplemented concentration and duration. In the group of $1.0{\mu}M$ 6.0 hr addition, the blastocyst development rate of day 4 and the survival rate of day 2 were the highest in each group. In the groups of $3.0{\mu}M$ 3.0 hr addition or $6.0{\mu}M$ 0.5 hr addition, the blastocyst development ($59.5{\pm}4.1%$ and $50.0{\pm}3.6%$) and survival rates ($72.7{\pm}5.4%$ and $79.2{\pm}4.0%$) on day 4 were significantly higher than that of control and other experiment groups (p<0.05). Meanwhile, the number of cells in blastocysts that produced by vit $K_1$ supplementation was $53.4{\pm}5.8$, $49.4{\pm}3.8$ and $51.5{\pm}4.5$ respectively, which were significantly higher than that of $40.2{\pm}2.3$ in the control group (p<0.05). There was no difference of the number of apoptotic cells between control and experiment groups. In addition, gene expression of survival blastocyst, the Bax mRNA expression was similar between the control and the experiment groups. However, Bcl-xL mRNA expression's in the group of $6.0{\mu}M$ 0.5 hr on day 4 was highest among control and experiment groups (p<0.05). In this study suggested that the control of concentration, duration and time was effective on the survival and cell number of porcine blastocyst derived from in vitro. We are not know what the exact reasons of the effect of vit $K_1$ on embryo development and need to fur ther study. However, vit $K_1$ might be using the selection of high quality porcine blastocyst.